Reaction Vessels

Compare Tool

Select up to 3 products

HomeAll Products

Reaction Vessels

1 - 32 of 137
Sort
View
Show
  • Reaction Vessels, Jacketed, Benchtop, Tool-Free Flat Flanges, Jacketed Lab…

    Chemglass

    Features: Tool-Free™ Jacket Connection Design Allows Hose to be Attached or Removed by Hand Without Using Tools Chemically Resistant Perfluoro O-Rings on All CG-911-A and CG-511 Drain Valves Graduation Scale on Both Sides Showing the Approximate Volume Sidearm on Lower Drain…

  • Stirrer Turbines, Upper, PTFE, Pilot Plant

    Chemglass

    PTFE six blade turbine style agitator for use with reactor stirrer shafts. Shaft opening is drilled straight through to permit positioning at any height on the shaft.

  • Reaction Vessels, Spherical

    Chemglass

    Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Vessel will fit standard heating mantles CG-10000 through CG-12502. For clamp see…

  • Ready Reactor™, Kilo-Scale

    Ace Glass

    Pre-packaged, turnkey 20 liter and 50 liter reaction systems for research and production purposes. Systems feature jacketed vessels, multi-neck flask heads, Universal support stand, and either a rod mounted brushless DC stir motor in our 20 liter (IKA Eurostar 60 Control) or a flange mounted 3/8 hp…

  • Reactor Support Frame

    Chemglass

    Features: Oversized Rugged 1" S.S. Pipe (1.315" OD) Uprights and Heavy Duty PTFE Coated Aluminum Fittings Provide Maximum Strength and Chemical Durability.  All S.S. Uprights are Passivated to Inhibit Corrosion.  Improved Support Clamp Auto-Centers Reactor and Lid,…

  • 20L Process Reactor Sytems

    Chemglass

    Complete reactor system on our NEW open air, auto-center stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…

  • Sublimation Apparatus, Vacuum

    Ace Glass

    Large scale sublimation apparatus constructed of heavy wall glass. Will sublime 100gms of solid sample. Cold finger tube positions in center neck and is held by a plastic bushing to a threaded condenser flask. All joints are PTFE-Clad to eliminate the use of grease and still avoid freezing. Kettle…

  • 15L Process Reactor Sytems

    Chemglass

    Complete reactor system on our NEW open air, auto-center stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…

  • Pressure Reactor, One-Piece, Jacketed Flask

    Ace Glass

    Complete, one-piece, jacketed flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and…

  • Tubes, Reaction, Single Neck, Airfree®, Schlenk

    Chemglass

    Cylindrical shaped tube, similar to AF-0537 but with an standard taper inner joint, useful for simple reactions. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.

  • RS9000 Heater/Shaker Reaction Stations

    Electrothermal (Cole-Parmer)

    The RS 9000 Heater/Shaker Reaction Station can be used within a robotic workstation or as a stand-alone apparatus within the lab. On a robotic platform, heating and shaking cycles can be controlled by external software or as part of a fully automated system, through the RS232/ RS485/ GSIOC ports;…

  • Corning® Chemistry Kit, Components with 19/22 Standard Taper Joints, 2 PYREX®…

    Corning

    This Corning® kit is similar to No. 6949E, as many of the same standard laboratory experiments can be performed with this kit. The kit’s PYREX® components all use 19/22 Standard Taper joints for standardization. Note in particular the inclusion of a 250mL flask with side tubulation, which is useful…

  • 100L Squatty Glass Reactor System

    Chemglass

    100L Squatty, Low Profile, glass reactor system with 400mm flange. 100L glass reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. Complete 100L Squatty Reactor System Features: More…

  • OS1025 STEM Omni Reaction Stations

    Electrothermal (Cole-Parmer)

    Our OS1025 STEM Omni Reaction Station enables you to run up to 10 reactions simultaneously at the same controlled temperature and stirring rate. The modular design of the OS1025 Omni Reaction Station means that the same base unit (OSCA) can accommodate a variety of cartridges and sample volumes…

  • Coils, Cooling/Heating, Stainless Steel, PFA Coated

    Chemglass

    For use with unjacketed cylindrical reaction vessels with a 200mm ID or 300mm ID flange. Coil can be used to cool or heat the contents of a vessel. Fabricated from #304 S.S. tubing with a green PFA coating that is electrically tested to insure complete coverage. This method of manufacture provides…

  • 75L Process Reactor Sytems

    Chemglass

    Complete reactor system on our innovative Kwik Mount support frame. Lexan safety shields surround the reactor with the front panel hinged for easy access. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED USING THE CG-2077-H STIRRER BEARING. IF YOU…

  • Reaction Vessels, Jacketed, Benchtop

    Chemglass

    Features: Chemically Resistant Perfluoro O-Rings On All CG-911-A And CG-511 Drain Valves Graduation Scale On Both Sides Showing the Approximate Volume Sidearm on Lower Drain Valve Can Be Used With a Standard 1/2 or 3/4in TFE, PFA or PP Compression Fitting All Vessels Are Serial…

  • 20L Jacketed Cylindrical Process Filter Reactor System

    Chemglass

    Our jacketed filter glass reactors can be used for single or multi-step reactions and filtrations in the same vessel, production and process scale peptide synthesis. Filter base eliminates material transfers and significantly reduces losses. Complete reactor system on our NEW open air, autocenter…

  • Adapters, Pressure Vessel

    Chemglass

    Adapter permits rotary evaporation of the contents of any of our CG-1880 pressure vessels after the reaction is complete. Adapter can also be connected to any vacuum line having a 24/40 port or used in conjunction with a CG-1014 adapter to connect to hoses. Eliminates the need to transfer samples…

  • Process Reaction Vessels, Jacketed, Large Scale

    Chemglass

    Jacketed large scale process reaction vessels. The 10, 15, and 20L vessels have a 200mm ID flange with an o-ring groove formed in the surface of the flange. The 30, 50, 75, and 100L have a 300mm ID flat ground flange. The inlet/outlet of the vessels are beaded pipe fittings for use with the CG-1964…

  • Pressure Reactor, One-Piece, Plain Flask

    Ace Glass

    Complete, one-piece, plain flask, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. One-piece design features a 25mm center opening and…

  • Pressure Reactor, Two-Piece, Jacketed, Bottom Outlet

    Ace Glass

    Complete, two-piece, jacketed flask with bottom outlet, pressure reactor system designed to perform low to moderate positive pressure reactions, synthesis and catalysis. Reactor capacities range from 500ml to 5000ml and use Ace-Threds to achieve a leak-tight system. Two-piece (flanged flask and…

  • Peptide Synthesis Vessels, Solid Phase

    Chemglass

    Solid phase peptide synthesis vessel having a medium or coarse porosity fritted glass resin support. Top of the vessel has a GL thread and is supplied complete with a PTFE lined PBT screw cap. Lower PTFE stopcock has a 2mm bore with the arm being 8mm O.D.

  • Reaction Vessel Lids, 3-Necks

    Chemglass

    Three neck reaction vessel lid to fit CG-1930 through CG-1931 vessels. Side necks are on a 30° angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

  • Reaction Vessels, Cylindrical, Jacketed

    Chemglass

    Cylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946. Cooling jacket is equipped with two removable hose connections to reduce the…

  • Reaction Vessel Lid, S.S., 300mm, 7-Neck

    Chemglass

    Reaction vessel lid is constructed of 1/4"; thick #316 S.S. with a 1/8"; thick PTFE gasket underneath. The only materials exposed to the reaction are PTFE and Viton®;. Lid has seven openings that accept 45/50 outer PTFE inserts. Inserts are secured to the lid using glass filled PTFE…

  • 50L Squatty Glass Reactor System

    Chemglass

    50L Squatty, Low Profile, glass reactor system with 400mm flange, on our innovative Kwik Mount support frame.  Complete 50L Squatty Reactor System Features:  More Clearance: 50L Squatty Glass Reactor System with 400mm Flange Maximizes Clearance Under The…

  • Reaction Vessel Lid, S.S., 400mm, 7-Neck

    Chemglass

    Reaction vessel lid is constructed of 1/4"; thick #316 S.S. with a 1/8"; thick PTFE gasket underneath. The only material exposed to the reaction is PTFE. Lid has seven openings that accept 45/50 outer PTFE inserts. One neck is a bulk addition port is 80mm reaction flange with o-ring…

  • Reaction Vessels, Cylindrical, Jacketed, Morton Indents, Lower Drain Valves

    Chemglass

    Similar to CG-1930, but with morton indentations to increase agitation during stirring. Supplied complete with two polypropylene hose connections and two screw caps. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum

  • 15L Process Reactor Sytems

    Chemglass

    Complete reactor system on our NEW open air, auto-center stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…

  • 50L Process Reactor Sytems

    Chemglass

    Complete reactor system on our NEW open air stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can…

  • Drain Valve, Zero Dead Space, Gl Heavy Duty Threads, Pilot Plant, 3” Beaded Pipe…

    Chemglass

    Features:  Glass Body Features a Heavy Duty GL Style Glass Thread Auto-Stop When Opening the Valve Anodized Aluminum Control Knob is Laser Etched with Directional Arrows for Opening and Closing the Valve Zero Dead Space  Perfluoro O-Rings on Tip and Plunger. …

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.