Polypropylene thermometer rack holds up to 25 thermometers in a vertical position Hole diameters in top and middle plates are 7.9 mm ( 5/16") Bottom plate has 3.2 mm ( 1/8”) diameter drain holes. Overall dimensions: 149 x 213 x 251 mm (5 7/8 x 8 3/8 x 9 7/8”)

Incubate liquid cultures on a slant using Thermo Scientific™ Nalgene™ Test Tube Slant Racks. Slant racks allow 5 or 20 degree tilt to allow media to harden at an angle for incubating liquid cultures. These racks are keyed with numbers and letters for easy identification and are…

Autoclavable Rows are numbered and lettered Base plate has rounded wells with drain holes. Molded cutouts in end panels form handles. 9259L10 and L20 are 213 x 110 x 111 mm high; 9259L30 through L50 are 213 x 110 x 127 mm high.

Style: Freezer Storage Box Size: 141 x 141 x 58mm Color: Natural Material: Polypropylene

Round-holed Stackable, autoclavable White, polypropylene rack takes 72 centrifuge tubes in 6 rows of 12. Molded cutouts in end panels form handles. 2591C58 and C60 hold 400-500 µL tubes and are 9” L x 4 3/8” W x 4 3/8” H. 2591C62 and C64 hold 1.5 mL tubes and are…

Used to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part…

Microcentrifuge tube racks are reversible 96-well racks that hold tubes in an 8 × 12 format.  One side of the reversible rack holds 96 1.5 mL, 1.8 mL or 2.0 mL microcentrifuge tubes while the other side holds 96 0.5 mL tubes.  Autoclavable racks are alpha-numerically…

50 Position rack 12.5 mm Open ID sized vials Racks are manufactured from polypropylene and can be easily cleaned in an automatic washer or autoclaved. The racks are sturdy and can be stacked, even when the vials are in place. Each well has an opening in the bottom to facilitate drainage.…

Autoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…

Disposable polypropylene vial rack Lettered and numbered for indexing individual tubes Corners interlock for convenient stacking

Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.

96 Wells 0.2 or 0.5 mL tubes Alphanumeric grid Specifically designed for PCR research, this 96-well rack holds either 96 0.2 mL PCR tubes or 96 0.5 mL style microcentrifuge or PCR tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes.…

Polypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by…

Reversible With lids Designed to hold 0.2 mL 8-strip PCR tubes as well as 0.5, 1.5 or 2.5 mL reagent vials on one side, this reversible rack is for any researcher using strip tubes for PCR. When using only 0.5 mL tubes, flip the rack over for 96 alphanumeric labeled 0.5 mL wells for easy…

Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…

The 4-Way Flipper benchtop storage system combines four racks in one. Designed to support a variety of tube sizes and styles, each rack can be rotated to any of the four sides to support different size centrifuge tubes. Their rugged polypropylene construction allows them to be autoclaved, placed in…

Polypropylene racks Top and middle plates have 25 mm diameter holes; bottom plate has wells tapering from 25 to 9 mm to hold hydrometer bulb Overall height is 251 mm Steam autoclavable at 121°C 6040A10 has top plate of 143 mm high for short hydrometers

Three styles available for our NMR and EPR Tubes 1187C59 (820-A): Lightweight polypropylene rack maximizes your benchtop storage capacity and is virtually inert 1187C64 (WG-2442): Simple but useful this stainless steel NMR tube rack accommodates 12 tubes with a maximum OD of 5mm.…

Racks are designed for our CryoSure® vials & MST™ tubes, holding up to fifty vials/tubes in alpha-numerically labeled holes. The racks are autoclavable and stackable. Tubes and vials sold separately.

Non-scratching Empty racks can be stacked Tube-centering depressions in bottom shelf are perforated. The hole rows have molded-in numbers and letters. Not autoclavable. All racks are 115 mm wide x 95 mm high.

Attach several racks for large experiments Heavy polypropylene construction Glove friendly Hold 1.5/2.0 mL tubes Racks slide together on both sides. Internal ribbing make racks stable and sturdy. The “Hold-It” finger slot on the front of the racks allows racks to…

The Flipper microtube rack is designed to hold either 96 0.5 mL or 96 1.5/2.0 mL style microcentrifuge tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes. The Flipper is fitted with a clear polypropylene lid and both sides are labeled in…

Ready-to-use No assembly required Provides an unrestricted view of tubes Available in 2 sizes: 13 and 16 mm and four colors: white, blue, green and red. Do not autoclave.

Round-bottom flasks of any size up to 10 liters are cradled securely in the stepped concentric rings of this holder. Can be stacked together for convenient storage Polypropylene plastic rack; not affected by spilled acids, alkalis or other corrosive liquids Steam autoclavable at…

Match Rack Material to Lab Use These sturdy, rigid racks feature interlocking end plates with handles for secure stacking when loaded with tubes up to 10cm (4") long. Rows are numbered and lettered for easy tube identification. All racks are steam autoclavable at 121°C (250°F). …

Perfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …

Fits 0.2 mL tubes on one side and 0.5 mL tubes on the other 96 wells per side in 8 x 12 format Every well numbered Custom molded Includes secure fitting lid

Hold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…

Designed specifically for 5ml centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16mm. Made of durable and corrosion resistant white polypropylene plastic End plates have handles for easy transport and stacking Top shelf…

Optimize your workflows through user-friendly handling of clearly arranged samples. Eppendorf Tube Racks and Eppendorf Cuvette Racks are ideal for sample processing, transport, and short- to mid-term storage of samples. Well Organized - The Eppendorf Tube Racks and Eppendorf Cuvette Rack …

Vial racks and containers allow a secure transportation of sample vials from lab to lab Safe standing position of the vials on the lab bench in dividers/cavities designed for the respective diameter Racks and containers available for a broad variety for different vial diameters, almost all…