Racks

Compare Tool

Select up to 3 products

Sort
View
Show
  • Poxygrid® "Half-Size" Test Tube Racks

    Bel-Art Products

    Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …

  • Chromatography Column Holder

    Bel-Art Products

    Securely holds as many as eight chromatography columns up to 30mm (1-3/16") in diameter in or between its flexible loops. Rigid plastic back is mounted on two polyethylene support blocks which slide over support stand rods Tighten the screws to mount the rack at the desired height …

  • Poxygrid® 50mL Centrifuge Tube Racks

    Bel-Art Products

    50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…

  • Scienceware® Lab-Aire® II Glassware Drying Racks

    Bel-Art Products

    Dry it - No Matter How Much Space You Have High storage capacity to accommodate up to 114 peg positions for all types of labware Single-sided benchtop models fit against a wall, conserving bench space Double-sided benchtop models provide twice the capacity with a slightly larger…

  • Scienceware® Poxygrid® Test Tube Racks

    Bel-Art Products

    Choice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…

  • Scienceware® Polypropylene Pipet Racks

    Bel-Art Products

    28-Place Holds 28 pipets in vertical position Pipets fit into 2 discs connected by central support column Upper disc has 10 holes, 14 mm in diameter and 18 holes, 11 mm in diameter Lower disc has 28 holes, 4 mm in diameter to support pipet tips Overall height 7"; diameter 7"H …

  • Scienceware® 24 Position Scintillation Vial Rack

    Bel-Art Products

    24-Hole Scintillation Vial Rack Takes 24 vials up to 30 mm o.d. Autoclavable; non-scratching Molded cutouts in end panels form handles For start to finish preparation Height to top of upper shelf: 44 mm. Overall dimensions: 298 x 127 x 95 mm high. Height to top of upper shelf is 1-3/4".

  • Rectangular Ice Bucket Test Tube Racks

    Bel-Art Products

    Made of expanded PVC Solid, molded one piece Fit Magic Touch Midi and Maxi Ice Pans These test tube racks are suitable for work in ice or dry ice and float in water baths, melted ice, dry ice alcohol slurry or liquid nitrogen. Test tubes are gripped firmly, yet are easy to insert…

  • Scienceware® Rack Slanted for 50ml Centrifuge Tube

    Bel-Art Products

    Easy tube content ID Autoclavable Angling 50 mL tubes allows easier identification of contents marked on cap. The rack, whether used on a benchtop or in a refrigerator, holds frequently used reagents nearby and on an angle facing the user. Angled rack is also useful for draining excess…

  • MCT/PCR Rack

    Bel-Art Products

    Perfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …

  • Scienceware® Wire Rack I.D. Tags

    Bel-Art Products

    Easy to use: snap on – pull off One piece, write on, wipe off design is economical and does not require assembly White color provides excellent contrast for most ink colors Fits wire-formed items made of 3mm (1⁄8") or 5mm (3⁄16") wire Chemical resistant and…

  • Scienceware® Separatory Funnel Rack

    Bel-Art Products

    The Scienceware® Separatory Funnel Rack allows the use of a variety of funnel sizes for a different experiments. With adjustable diameter funnel slots, this rack accepts funnel sizes from 100cc to 1000cc. In addition, the two support tiers can be independently adjusted to any height on long…

  • Magic Touch™ Round Floating Tube Racks

    Bel-Art Products

    Lightest, most durable icewares on the market, Magic Touch™ Round Floating Tube Racks float in water baths, melted ice, dry ice alcohol slurries or liquid nitrogen. Available to fit 1.5ml microcentrifuge tubes or 15ml conical tubes, they come in blue, black, red and green. Test tubes are…

  • Scienceware® Poxygrid® Microliter Pipettor Racks for Gilson Pipetman®

    Bel-Art Products

    Three Styles to Suit Your Needs Choose from 3 styles of epoxy-coated aluminum rack to hold Gilson Pipetman® pipettors. Provides storage and easy access for up to 10 pipettors plus up to two Pipet-Aid® pipettes 0211J40 (H18962-0001) for desktop storage 1226D30 …

  • Poxygrid® Eye Wash Bottle Wall Rack

    Bel-Art Products

    Fabricated of welded steel wire with corrosion-proof epoxy coating, this wall rack holds a single 1000mL (32oz) eye wash bottle in plain view for emergency use. Suitable for use with 8244N34 eye wash bottles (sold separately) Hangs on a screw or nail

  • Bel-Art®–SP Scienceware® Magnetic Bead Separation Racks

    Bel-Art Products

    For all of your magnetic separation experiments, these powerful racks sequester magnetic beads so that affinity ligands (antibodies, streptavidin or proprietary reagents for coupling nucleic acids) or rinse solutions can be added or decanted in assays. They offer exceptional quality and value…

  • Scienceware® Color-Coded No-Wire Polypropylene Test Tube Racks

    Bel-Art Products

    Constructed of a special blend of polypropylene, these autoclavable racks will sink in a water bath Interlocking feet allow racks to be stacked while not in use Racks feature end plates for labeling. Rows are numbered and lettered for tube identification. Outside dimensions: 9.7” x…

  • 5 mL Centrifuge Tube Rack

    Bel-Art Products

    Designed specifically for 5ml centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16mm. Made of durable and corrosion resistant white polypropylene plastic End plates have handles for easy transport and stacking Top shelf…

  • Scienceware® Microcentrifuge Tube Ice Racks

    Bel-Art Products

    Lower section of these 2-piece racks is a tray for water or crushed ice. Of gray, high-impact styrene. 0210C94 holds 120 tubes under 12 mm diameter and is 16" L x 5-5/8" W x 2-1/4" H; 2591D02 holds 105 tubes under 8 mm diameter and is 8-1/2" L x 4-7/8" W x 2-5/8" H;…

  • Scienceware® Poxygrid® 15mL Conical Tube Rack

    Bel-Art Products

    Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…

  • Adjustable Width Petri Dish Dispenser Rack

    Bel-Art Products

    This adjustable dispenser neatly and safely holds 15 Petri dishes up to 10.2cm (4") diameter. Slides open at the base for easy refilling Rugged ABS plastic 8.9cm (3-1/2") wide; extends from 12.7cm (5") to 21cm (8-1/4") long; 21cm (8-1/4") high

  • Scienceware® Floating Cryotube Rack

    Bel-Art Products

    Polypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by…

  • Poxygrid® Imhoff Settling Cone Rack

    Bel-Art Products

    Use a Poxygrid® cone rack to support three Imhoff settling cones in a single row for clearer viewing. Lightweight Poxygrid® racks hold cone tips up off the benchtop for easier viewing and to allow plug removal if required Wire frame racks have a wide base for stability; epoxy…

  • Scienceware® Rack Slanter

    Bel-Art Products

    Tilt your test tube rack to 25°, 35° or 45° to reduce hand strain when working with pipettors. Also ideal for creating agar slant tubes or use with the Mini-Magnifier to aid in the viewing of Petri dishes. Base legs have predetermined slots that stand slides in and out of to…

  • Scienceware® Pipet Support Rack

    Bel-Art Products

    Holds 12 pipets Polyethylene construction Pipet support rack supports pipets horizontally without putting pressure on fragile tips.  Rack holds 12 volumetric or graduated pipets from 1 mL . The polyethylene support measures 241 mm L x 178 W x 292 H (9 1/2” x 7” x 11…

  • Conical Tube Holder

    Bel-Art Products

    Move tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.

  • Full-View Test Tube Supports

    Bel-Art Products

    Hold More Tubes, Waste Less Space This versatile polypropylene rack has pins for supporting or draining test tubes. Stores test tubes upright, full or empty Holds inverted test tubes over pins for draining The rack with 102 pins, 5 x 16 rows (9259G50), is excellent for drying…

  • Scienceware® Miniature Vial Caddy

    Bel-Art Products

    Easy-to-use caddy provides compact, organized storage and transport for 5-8mL miniature vials. 150 places (166 pins) Side cut-outs for easy grip and carry Heat and chemical resistant High density polypropylene; autoclavable at 121°C (250°F)

  • Scienceware® Adjustable-Height Test Tube Rack

    Bel-Art Products

    1.5 to 15 mL tubes Holds six tubes or vials Compact footprint This height-adjustable rack securely holds up to six tubes or vials at any desired depth in a water bath or beaker. Rack features a flexible grip that easily retains mixed test tubes or varying weight and volume…

  • Test Tube Racks

    Bel-Art Products

    Available in two sizes to accommodate tubes, vials, serological tubes and reagent containers, these polyethylene racks both include 5 pins for drying tubes upside down. 12 wells rack has 20.6mm diameter (13/16") holes for 16 to 20mm tubes 17 wells rack has 14mm diameter (9/16")…

  • Scienceware® Polyethylene Test Tube Racks

    Bel-Art Products

    Cylindrical wells for tubes, vials, bottles, centrifuge shields, etc. Stable, one-piece construction Versatile racks offer wells and drying pins

  • Prep Safe™ Floating Microcentrifuge Tube Rack

    Bel-Art Products

    Unique tabs keep tubes in place and caps closed to protect your samples from loss and contamination. Patent pending   Prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Fits most 1000ml beakers …

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.