These compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…

These compact, convenient 80 well racks are designed to keep your tubes neatly and efficiently organized. They are compatible with conical and self-standing microtubes and all wells have raised, molded numbers for quick identification. The bottom of each well has been recessed to improve conical…

Constructed with Thermo Scientific™ Resmer™ Manufacturing Technology. Racks are repeatedly autoclavable. Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and…

The 96 Well "Reversible" Micro Tube Racks are designed so that one side of the rack accommodates 0.5ml microcentrifuge tubes. The reverse side holds 1.5ml to 2.0ml microcentrifuge tubes and screw cap microcentrifuge tubes. A great replacement for cardboard or metal freezer racks. …

The PCR Storage Rack, by Heathrow Scientific, offers a sleek and modern design that’s packed full of features. The patent pending design offers a unique lid the rack slides out from, and then rotates 180°, to become a convenient stand the rack sits on. Ergonomic textured finger grips…

Easy tube content ID Autoclavable Angling 50 mL tubes allows easier identification of contents marked on cap. The rack, whether used on a benchtop or in a refrigerator, holds frequently used reagents nearby and on an angle facing the user. Angled rack is also useful for draining excess…

The 80 Well Micro Tube Racks are designed with 80 wells in a 16 x 5 configuration with each well numbered for convenient sample identification. Rack dimensions are 9"L x 2-1/16"D with a well diameter of 10.5mm. Available in 9 original colors plus 5 fluorescent colors, this assortment…

Choice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…

labForce® benchtop tube racks and storage boxes are available in a variety of popular configurations.  Racks and boxes are available to hold or store tubes from 0.1mL to 500mL.

Close flat for compact storage! Pop up for quick use! Simple, easy action to open and close – expand and collapse when racks are needed. Designed to help organize 15 and 50mL tubes. Imprinted grid aids quick retrieval. Stack racks in open or closed position. Saves space when racks are not…

Polypropylene racks snap together for easy assembly, sturdy construction, stackable, and are available in four colors. Will not float in waterbath. Alphanumerical positions for clear sample identification. Wide spaces between positions. Operating temperature -20 to 90°C. Autoclavable at 121°C.

Reusable Micro centrifuge Tube Racks are manufactured in a state of the art molding facility using high purity virgin Polypropylene (PP). These racks hold a 12 x 8 array (96) of 1.5 and 2.0ml micro centrifuge tubes on one side with smaller positions (80) for the 0.5ml with a 16 x 5 array on the…

Easily carry multiple bottles from the stockroom to the lab Easy to assemble, stores flat Versatile tote carries 500 ml, 1L or 4L bottles Strong, durable and lightweight plastic With a capacity of 28 pounds, this folding tote is perfect for safely and easily carrying bottles…

Cannot rust, chip or scratch Letters and numbers identify tube locations Assorted colors available These racks are similar to 9259J65 series, but are half the size to accommodate tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’…

These reversible racks are designed to keep 0.5mL and 1.5mL( up to 2.0mL) microcentrifuge tubes organized and upright. Made of polypropylene, choose the blue rack for 60 tube capacity (5 rows of 12 tubes) or the larger orange rack for 96 tube capacity (8 rows of 12 tubes). Both racks have…

Autoclavable Consists of an array of pegs spaced to hold tubes while allowing full view of contents Pegs convenient for holding inverted tubes for drying When racks are inverted, ribs keep tubes off base to allow drainage through holes 9260B01 and B13 are 13 mm with an array of 8 x…

The chemical-resistant, HDPE-coated wire racks feature a slotted bottom and reinforced edges. These racks hold all brands and types of tubes, conical, round, flat bottom, plastic or glass. The square wells have three tiers so the tubes can fit securely in the racks. It is also Autoclavable and can…

Vial racks and containers allow a secure transportation of sample vials from lab to lab Safe standing position of the vials on the lab bench in dividers/cavities designed for the respective diameter Racks and containers available for a broad variety for different vial diameters, almost all…

These multi combination racks made of high-quality Polypropylene (PP) have a unique rotate and lock design that allows you to choose the size of the rack according to your needs. These fully autoclavable racks can withstand temperature range of -80 °C to 121°C and can accommodate tubes of various…

Rack for 5.0mL microcentrifuge tubes. Holds 25 tubes. Wells are numbered for easier identification. Reusable, autoclavable and freezable (-90 C). Made of Polypropylene.

Increased spacing allows the user to pipet samples or attach caps without removing the vials from the rack. Available 5 per case.

Extra tough to resist most acids, solvents, and heat. Extra-tough storage for smaller spaces. These durable racks are molded in a single, continuous piece—no assembly required and no detachable pieces. Racks are made of Delrin® fiberglass-reinforced polyoxymethylene (POM), an…

Polypropylene Autoclavable 20 places Rack accepts 12mm tubes Rack can be used for holding cryotubes during work or incubation. It floats in water and can be used for quickly thawing frozen cells in a water bath. Rack has handle for easy handling. The filled rack unloads easily by…

Removable hinged lid lies flat Perfect for pre- or post-PCR sampling. Sturdy polypropylene rack accommodates individual tubes or strips of 8 or 12 tubes. Tube wells are easily identified with embossed numbers and letters. Available in natural, single colors, or assorted colors (one each of…

Autoclavable Durable polycarbonate Holds CryoTube vials and grips Nunc CryoTube vials with interlocking feet. Starfoot Cryotubes fit into grooves for one-handed operation.

Produced from polypropylene (PP) Autoclavable Excellent rack for benchtop use or freezer storage.   Excellent chemical & temperature resistance   96 Well rack capacities - 96-place for 1.5 & 2.0mL tubes - 96-place for 0.5 & 0.2mL tubes   96 Well…

Excellent space-savers for use in water baths, laminar flow hoods, fume hoods or any place where space is limited. Choice of three colors: orange for biohazard warning, green and blue for general lab use. Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy …

These racks are designed to hold Labcon centrifuge tubes. Unlike foam racks, they are autoclavable and will not fall apart with repeated use. They can be frozen, and they stack together to minimize storage space. An interlocking design lets you connect more than one rack to create a handy work…

For large volume centrifuge bottles Epoxy-coated steel wire rack is ideal for conical-bottom centrifuge bottles that can not stand by themselves. Bottom rails hold bottles securely upright. Accommodates round-bottom tubes as well. Holds up to 60 mm diameter bottles (250 mL max.). Autoclavable.…

Dimensions: 246 x 105 x 64mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…

Made of polypropylene. The T100 BIOTUBE™ rack with standard 96-well on center spacing of tubes offers a color coding system using colored interchangeable plastic grids. These are used as a support for the 1.2 ml tubes. This unique grid stands on four legs and can be removed from the base of…