Racks

Compare Tool

Select up to 3 products

1 - 32 of 966
Sort
View
Show
  • Polarsafe™ Cooling Blocks

    Argos Technologies

    Polarsafe™ Cooling Blocks are perfect for the utmost in temperature control for precious laboratory samples. These electric blue aluminum blocks are anodized to stand up to cold temperatures. Uniform well construction provides inserted tubes with a snug fit and a highly efficient degree…

  • Wireless Tube Racks, Full Size

    Globe Scientific

    Fully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat…

  • Rack for 15mL & 50mL Centrifuge Tubes

    Globe Scientific

    Rack for 15mL & 50mL centrifuge tubes, orange, ships flat & is simple to assemble. Holds twenty 50mL and thirty 15mL centrifuge tubes.

  • CoolRack® and CoolSink™ modules

    BioCision

    BioCision® thermoconductive modules provide reproducible and standardized temperature control to biological samples while on the bench. Place CoolRack® or CoolSink™ modules on ice, dry ice, liquid nitrogen, water baths, heat blocks (-200°C through 100°C+) or other and they…

  • Reversible Racks for Microtubes

    Globe Scientific

    Autoclavable polypropylene (PP) Excellent rack for benchtop use or freezer storage 80/60 well rack capacities: 80-place for 1.5mL and 2mL tubes 60-place for 0.5mL and 0.2 mL tubes 96 well rack capacities: 96-place for 1.5mL and 2.0mL tubes 96-place for 0.5 mL and 0.2 mL tubes …

  • TUFFBLOK™ 4-Way Interlocking Tube Racks

    Globe Scientific

    Link multiple racks together for a custom rack solution Autoclavable polypropylene (PP) Heavy-duty construction is durable and chemical resistant Multiple colors available for benchtop organization at a glance Numeric markings for sample identification Versatile design accommodates…

  • Magic Touch™ Rectangular Floating Tube Racks

    Bel-Art Products

    Lightest, most durable icewares on the market, Magic Touch™ Rectangular Floating Tube Racks float in water baths, melted ice, dry ice alcohol slurries or liquid nitrogen.. Available to fit 1.5ml microcentrifuge tubes or 15ml conical tubes, they come in blue, black, red and green. Test…

  • Bottle Carrier - Bucket Type, Rubber

    Eagle Thermoplastics

    Resists most aqueous solutions, acids and bases Steam sterilizable Can be used from -45° C to 110° C Centering ring holds bottle from wall Large carrier accommodates 2.5 L and 4 L bottles. Small carrier accommodates 500 mL and 1,000 mL bottles. Made from a unique, high performance,…

  • Epoxy Pegboard Drying Racks

    Inter Dyne Systems

    Drying Rack, Pegboard, Epoxy, Glassware Epoxy pegboards come standard in black, 1" thick material. A stainless steel drip trough (sold seperately) can be easily mounted to the bottom edge to provide excellent draining capacity. Please note: Units do not include a wall attachment and…

  • Wireless Tube Racks, Half Size

    Globe Scientific

    Fully autoclavable Molded from reinforced nylon for strength and durability with no coatings to chip, peel, or rust Single piece, three tier grid design for secure and stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat…

  • Test Tube Stands

    Globe Scientific

    Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Three tiered design holds tubes securely Sturdy handles facilitate easy transport 4 Color options for organization of samples or benchtop

  • Vial Racks for 2mL and 4mL Vials

    National Scientific

    Polystyrene racks can be stacked empty or with any number of vials inserted Polypropylene racks can be stacked empty or with a full tray of vials Polypropylene rack is durable; can be washed and reused multiple times All racks feature alphanumeric indexing for easy location of samples …

  • Drying and Draining Rack

    Globe Scientific

    Stain-Resistant Durable Rack 72 interchangeable pegs - 11 small pegs Drip channel with draining hose Mounting kit and template for hanging Hooks for joining together additional racks Rack dimensions: 17.7"(W) x 24.8"(H) x 4.3"(D) (450mm x 630mm x 110mm) Peg…

  • 96 Place Reversible Racks with Covers

    Globe Scientific

    Produced from polypropylene (PP) Autoclavable Excellent rack for benchtop use or freezer storage.   Excellent chemical & temperature resistance   96 Well rack capacities - 96-place for 1.5 & 2.0mL tubes - 96-place for 0.5 & 0.2mL tubes   96 Well…

  • Poxygrid® 50mL Centrifuge Tube Racks

    Bel-Art Products

    This black epoxy-coated rack holds 30mm diameter or smaller centrifuge tubes in a 4 x 6 pattern, 24 tubes per rack. Height: 7.9cm (3.1"); four feet that raise the height an additional 2.1cm (0.81") Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids…

  • 20 - 21mm, 40-Place Polypropylene Test Tube Racks

    Globe Scientific

    Dimensions: 246 x 105 x 72mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…

  • Unwire™ Test Tube Racks: Resmer™ Manufacturing Technology

    Thermo Scientific Nalgene

    Smooth finish leaves fewer places for contaminants to lodge; no welds to break, no sharp edges. Endplates accept large labels for easy identification of samples. Higher specific gravity than water so it stays submerged in a water bath and won't float. Withstands most lab chemicals and…

  • Wire Drying Rack

    Heathrow

    Saves glassware from chips and cracks Drain and dry test tubes, beakers, flasks, and other labware. Place selfstanding rack on a table or near a sink. Or, use hooks to hang rack on the wall. Holds up to 90 pieces of labware on eighteen 127 mm pins and seventy-two 76 mm pins. Constructed of…

  • Drying Rack

    Dynalon

    This sturdy stand is fabricated of 3/8" clear  acrylic adding style and function to a normally wall mounted rack. The 4.5 lb stand includes all hardware needed to attach to the 5918-0000 drying rack and also comes with a 5' section of our 1085-0012 vinyl laboratory tubing. Further,…

  • 25mm, 40-Place Polypropylene Test Tube Racks

    Globe Scientific

    Dimensions: 295 x 125 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…

  • Aluminum & Stainless Steel Test Tube Racks

    Blacks Machine Co.

    Test tube supports (racks), S-shaped, made of a single heavy sheet of aluminum or stainless steel bent to form a solid, stable base with two perforated shelves. Smooth, flat surfaces simplify cleaning. Products are manufactured in the USA Custom sizes are available on a quoted basis

  • Test Tube Peg Racks

    Globe Scientific

    Fully autoclavable Manufactured from durable reinforced polypropylene (PP) Peg design allows easy viewing of tube contents Can be used to dry inverted tubes while minimizing collection of airborne contaminants Dimensions (L x W x H): 13mm: 179 x 127 x 64mm (7" x 5" x…

  • MCT/PCR Rack

    Bel-Art Products

    Perfect for benchtop use or freezer storage, this compact, double-sided polypropylene rack accommodates 0.2ml thin-walled PCR tubes on one side while the opposite side holds 1.5ml to 2.0ml microcentrifuge tubes. 80 wells on each side keep tubes upright in a 5 x 16 array and are numbered for …

  • 30mm, 24-Place Plastic Test Tube Racks

    Globe Scientific

    Perfect for 50mL Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float …

  • TUFFBLOK™ XL 4-Way Tube Racks

    Globe Scientific

    Autoclavable polypropylene (PP) Heavy-duty construction is durable and chemical resistant Multiple colors available for benchtop organization at a glance Versatile design accommodates different tube sizes on each side The four sides hold the following tubes: Eight – 50mL or 30mm…

  • 96-Well Reversible Rack

    Heathrow

    Easy-to-grasp tabs for sample handling and storage Flip polypropylene rack from 96 wells for 0.5 mL tubes on one side to 96 wells for 1.5/2.0 mL tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. 0.5 mL wells are…

  • Poxygrid® 50mL Centrifuge Tube Racks

    Bel-Art Products

    50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…

  • 16 - 17mm, 60-Place Polypropylene Test Tube Racks

    Globe Scientific

    Dimensions: 246 x 105 x 72mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float Special design allows…

  • Serological Pipet Storage Racks

    Globe Scientific

    Four angled compartments protect and organize glass or plastic serological pipets Durable ABS construction for scratch resistance and easy cleaning Strong magnets on both sides for secure mounting to most metal surfaces Rack can stand on flat surface without mounting Two included…

  • Scienceware® Poxygrid® Test Tube Racks

    Bel-Art Products

    Choice of Four Colors and Multiple Sizes Chemical and corrosion-resistant steel wire racks are coated with heat-cured epoxy. Orange racks can be used for biohazard warning, yellow for radioactive warning. Epoxy coatings are unaffected by organic solvents, salts, weak acids and weak…

  • Float Racks for 1.5mL and 2.0 mL Microtubes

    Globe Scientific

    Autoclavable polypropylene (PP) construction for strength, buoyancy, and temperature resistance Racks float with full load of filled tubes Molded handle in center of rack for comfort and support during transport Legs allow rack to stand upright for use on benchtopUse in ice, waterbaths or…

  • Slide Holders

    Jaece

    White plastic receptacle to hold slides during evaluation and cleaning These strong, lightweight slide holders are chemical resistant and provide an inexpensive way to dry slides and drain excess fluids from flat surfaces. Angle of slots facilitates clear viewing of desired slide. Beveled…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.