MilliporeSigma Purification & Additives
-
Molecular sieve 0.3 nm beads ~ 2 mm
MilliporeSigmaCAS Number: 1318-02-1 Solubility: (20°C) insoluble Bulk Density: 700 - 750 kg/m3
-
Pinacol for synthesis
MilliporeSigmaCAS Number: 76-09-5 Melting Point: 41°C Molar Mass: 118.18 g/mol Boiling Point: 174°C (1013 hPa) Flash Point: 77°C Refractive Index: 1.4326 (45°C, 589 nm) Density: 0.967 g/cm3
-
4-Chlorophenol for synthesis
MilliporeSigmaCAS Number: 106-48-9 UN Number: UN2020 Solubility: 27 g/l (20°C) Melting Point: 41 - 44°C Molar Mass: 128.55 g/mol Boiling Point: 220°C (1013 hPa) Vapor Pressure: 0.15 hPa (20°C) Flash Point: 121°C Density: 1.26 g/cm3 (45°C)
-
di-Sodium fumarate for synthesis
MilliporeSigmaCAS Number: 17013-01-3 Solubility: 228 g/l (25°C) Molar Mass: 160.04 g/mol pH: 7 - 8 (50 g/l, H2O)
-
Diethyl ether EMPLURA®
MilliporeSigmaCAS Number: 60-29-7 UN Number: UN1155 Solubility: 69 g/l (20°C) Melting Point: -116.3°C Molar Mass: 74.12 g/mol Boiling Point: 34.6°C (1013 hPa) Vapor Pressure: 587 hPa (20°C) Flash Point: -40°C Explosion Limit: 1.7 - 36 %(V) Density: 0.71 g/cm3 …
-
Chemizorb® Granules Absorbent for spilled liquids
MilliporeSigmaCAS Number: 68855-54-9 Solubility: Bulk Density: 300 kg/m3 pH: 10 (100 g/l, H2O, 20°C)
-
Sodium molybdate dihydrate for synthesis
MilliporeSigmaCAS Number: 10102-40-6 Solubility: 840 g/l (20°C) Molar Mass: 241.95 g/mol Bulk Density: 1000 - 1400 kg/m3 pH: 9 - 10 (840 g/l, H2O, 20°C)
-
Silica gel with indicator (orange gel), granulate ~ 1 - 3 mm
MilliporeSigmaSolubility: 1 g/l Melting Point: >1000°C
-
Hydantoin for synthesis
MilliporeSigmaCAS Number: 461-72-3 Solubility: (20°C) slightly soluble Melting Point: 219 - 222°C Molar Mass: 100.08 g/mol
-
1,4-Bis(2-methylstyryl)-benzene for synthesis
MilliporeSigmaCAS Number: 13280-61-0 Melting Point: 179 - 181°C Molar Mass: 310.43 g/mol
-
Türk's solution for leukocyte counting
MilliporeSigmaSolubility: (20°C) soluble Density: 1.00 g/cm3 (20°C)
-
Nickel(II) acetylacetonate for synthesis
MilliporeSigmaCAS Number: 3264-82-2 Solubility: 4.8 g/l (20°C) Melting Point: 208°C Molar Mass: 256.91 g/mol Bulk Density: 470 kg/m3 Boiling Point: 220 - 235°C (14 hPa) Vapor Pressure: 2.7 hPa (110°C)
-
N-Lauryl sarcosine sodium salt (stabilised) for synthesis
MilliporeSigmaCAS Number: 137-16-6 UN Number: UN2811 Solubility: (20°C) soluble Melting Point: 45 - 47°C Molar Mass: 293.38 g/mol Bulk Density: 400 kg/m3 Flash Point: >150°C pH: 8 (30 g/l, H2O, 20°C)
-
Azelaic acid, technical grade for synthesis
MilliporeSigmaCAS Number: 123-99-9 Solubility: 2.4 g/l (20°C) Melting Point: 107°C Molar Mass: 188.22 g/mol Boiling Point: >500°C (1013 hPa) Vapor Pressure: Flash Point: 215°C Density: 1.029 g/cm3 (20°C) pH: 3.5 (1 g/l, H2O)
-
Ethyl methyl ketone (2-butanone) EMPLURA®
MilliporeSigmaCAS Number: 78-93-3 UN Number: UN1193 Solubility: 292 g/l (20°C) Melting Point: -86°C Molar Mass: 72.11 g/mol Boiling Point: 79.6°C (1013 hPa) Vapor Pressure: 105 hPa (20°C) Flash Point: -4°C Refractive Index: 1.3814 (15°C) Explosion Limit: …
-
Giemsa's azur eosin methylene blue solution for microscopy
MilliporeSigmaUN Number: UN1230 Solubility: (20°C) soluble Boiling Point: >65°C Flash Point: 18°C Explosion Limit: 5.5 - 36.5 %(V) Methanol Density: 0.99 g/cm3 (20°C) Ignition Point: 455°C pH: 6.1 - 7.0 (H2O, 20°C) (undiluted)
-
UN Number: UN1230 Solubility: (20°C) soluble Boiling Point: 65°C Vapor Pressure: 125 hPa (20°C) Flash Point: 12°C Explosion Limit: 5.5 - 36.5 %(V) Methanol Density: 0.79 g/cm3 (20°C) Ignition Point: 455°C
-
Methanol hypergrade for LC-MS LiChrosolv®
MilliporeSigmaLiChrosolv hypergrade is accurately tested for LC-MS suitability, and meet all the requirements of modern LC-MS ionization methods (ESI/APCI - positive and negative mode). Thanks to their low level of ionic background and low ion suppression, LiChrosolv hypergrade solvents provide high…
-
1-Chloro-2-methylpropane for synthesis
MilliporeSigmaCAS Number: 513-36-0 UN Number: UN1127 Solubility: 28 mg/l (20°C) Melting Point: -131°C Molar Mass: 92.56 g/mol Boiling Point: 69°C (1013 hPa) Vapor Pressure: 161 hPa (20°C) Flash Point: -17°C Refractive Index: 1.3975 (20°C, 589 nm) Explosion…
-
-
Aluminium hydroxide powder pure, hydrargillite
MilliporeSigmaCAS Number: 21645-51-2 Solubility: 0.0015 g/l (20°C) Melting Point: 300°C Elimination of water of crystallisation Bulk Density: 600 kg/m3 Vapor Pressure: Density: 2.42 g/cm3 (20°C) pH: 8 - 9 (100 g/l, H2O, 20°C) (slurry)
-
Butyltinhydroxide-oxide for synthesis
MilliporeSigmaCAS Number: 2273-43-0 UN Number: UN3146 Solubility: (20°C) insoluble Molar Mass: 208.81 g/mol Boiling Point: >350°C Vapor Pressure: 1.47 hPa (20°C)
-
(R)-(-)-Menthyl acetate for synthesis
MilliporeSigmaCAS Number: 2623-23-6 Molar Mass: 198.3 g/mol Boiling Point: 229.5°C Density: 0.925 g/cm3
-
Toluene-4-sulfonic acid sodium salt for synthesis
MilliporeSigmaCAS Number: 657-84-1 Solubility: (20°C) soluble Molar Mass: 194.18 g/mol
-
-
Span® 80 for synthesis
MilliporeSigmaCAS Number: 1338-43-8 Solubility: (20°C) insoluble Molar Mass: 428.60 g/mol Boiling Point: >100°C Flash Point: Refractive Index: >149°C Density: 1.0 g/cm3 (20°C)
-
Methylamine (40% solution in water) for synthesis
MilliporeSigmaMelting Point: -40 C Density: 0.90 g/cm3 at 20 C
-
Silicon tetrachloride for synthesis
MilliporeSigmaCAS Number: 10026-04-7 UN Number: UN1818 Solubility: (20°C) (decomposition) Melting Point: -70°C Molar Mass: 169.90 g/mol Boiling Point: 57°C (1013 hPa) Vapor Pressure: 260 hPa (20°C) Density: 1.48 g/cm3 (20°C) pH: 1 (5 g/l, H2O)
-
Dibutyl sulfide for synthesis
MilliporeSigmaCAS Number: 544-40-1 Solubility: (20°C) insoluble Melting Point: -80°C Molar Mass: 146.29 g/mol Boiling Point: 188.7°C (1013 hPa) Vapor Pressure: 26 hPa (80°C) Flash Point: 62°C Refractive Index: 1.453 (20°C, 589 nm) Density: 0.84 g/cm3 (20°C)