1/3 hp submersible sump pump with cast iron housing, polypropylene base, polycarbonate cover, and thermal overload protection. “CIA” models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 1" to 4". The 6-CIA-RS has a piggyback diaphragm switch with same “on/off”…

For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild…

1/3 hp pedestal sump pump with 1/4" solids handling capability. 1-1/4" FNPT discharge. Automatic float switch with adjustable on/off levels.

For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild…

Submersible Effluent Pump available with ? hp, ½ hp, or 1 hp, cast iron motor and pump housing, motor has oil-filled chamber with double ball bearing, designed for hi-torque and is thermally protected with automatic reset (single-phase only), 2? NPT discharge, piggyback mechanical float switch for…

Non-submersible self-priming transfer pumps. Both in 115 V and 12 VDC, these models are designed to operate 15 minutes per hour. Model 370 is designed for higher and lower temperatures.

Magnetically driven pumps for highly corrosive chemicals and solutions. The Little Giant® MD-CK series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polyvinylidene fluoride, PTFE, carbon, ceramic and Fluoroelastomer (FKM) parts.

Epoxy filled pumps are compact in design, energy efficient, and have a corrosion-resistant plastic housing.

Magnetically driven pumps for semi-corrosive chemicals and solutions. The Little Giant® MD-SC series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polypropylene, ceramic, and Nitrile parts.

4/10 hp Submersible High-Head Effluent Pump designed to handle 3/4" solids. Shut-off at 45', cast-iron base, motor housing and motor cover (thermoplastic cover on SFS models), thermoplastic elastomer non-clog impeller, thermal overload protection, and 1-1/2" FNPT discharge. Automatic "RF" versions…

Self-priming, completely submersible Output 3 1/4 gpm (12 Lpm) at one-foot (0.3 m) head, 2 gpm  (7.5 Lpm) at five-foot (1.5 m) head; maximum pressure 3.2 psi (22 kPa) Continuous-duty, 1.1 ampere motor, sealed and permanently lubricated, enclosed in epoxy-coated, cast-aluminum…

Non-submersible high pressure pump used for carpet cleaners, dispenser displays and pressure washer applications. 3/8" OD barbed intake and discharge, 24" lead wires.

1/3 hp Automatic Utility pump with durable reinforced thermoplastic pump casing, continuous duty ?oil free” motor, bottom suction design with built-in strainer to eliminate internal damage from possible debris, removable filter screen for easy cleaning, and 1-1/4? NPT discharge. SP33A features an…

For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild…

Little Giant® swimming pool cover pumps help safeguard and protect your pool cover from prolonged accumulation of rain or melting snow. Available in manual and automatic versions, pool cover pumps easily adapt to a standard garden hose for water removal.

Non-submersible pump designed to pump weak acid and chemical with a pH factor of 6 to 7. Nylon front with 3/8" FNPT intake (1/2" I.D. hose adapter included), 1/4" MNPT discharge.

5 Series: 1/6 hp Submersible Sump/Utility Pump with cast aluminum housing, plastic base, bottom sump-type pick-up with removable plastic screen, pumps down to 1/8", thermal overload protection, 1" FNPT discharge with a garden hose adapter. 5-ASP features a diaphragm pressure switch…

Little Giant performance, plus energy savings — the ES Series pumps are a line of energy-saving, high performance, fully submersible sump, sewage and effluent pumps designed for the professional plumbing contractor. ES Series Pumps consume less energy while delivering greater pump flow and…

Centrifugal Pump, Magnetic Drive, Stainless Shaft Ideal for OEM applications For continuous, heavy duty pumping of mildly corrosive solutions and suspensions in pH range 5 to 9, having viscosity to 20 cP, at temperatures to 65°C (150°F) Employs magnetic coupling to drive…

Centrifugal Self-Priming Effluent Pump available with ½ hp or ¾ hp, cast iron casing, higher than NEMA service factor dual compartment motors, built-in check valve facilitates fast priming and guards against siphoning action. Self-priming effluent pumps designed for installations with septic tanks…

Small submersible pump that works well in marine applications. Pump can be used inline for intermittent use only.

Franklin Electric submersible motor, PPO staging, 10' SJOW lead, and poppet check valve.

1/4 hp Automatic Utility pump with corrosion-resistant aluminum pump casing, continuous duty ?oil free” motor, bottom suction design with built-in strainer to eliminate internal damage from possible debris, removable filter screen for easy cleaning, and ¾? NPT discharge. SP25A features an automatic…

4/10 hp Submersible Sewage Pumps designed to handle 3/4" solids. Permanent split capacitor (PSC) motor, heavyduty cast iron housing, volute and cover, non-clog thermoplastic elastomer impeller and thermal overload protection. The "RF" automatic models feature a “piggyback” mechanical float switch…

Submersible pumps with Fluoroelastomer (FKM) seals, 1/4" MNPT discharge, master builders conduit fitting, 6' power cord without plug. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory.

These pumps feature an oil-filled motor housing with a radial lip seal on the motor shaft. They have an exceptional life expectancy because oil serves as a continuous lubricant for all the moving parts and the shaft seal. This non-toxic dielectric oil, often paired with an aluminum, cast iron or…

Centrifugal Pump, Magnetic Drive, Ceramic Shaft (7884J25, J45) Non-submersible pumps with leakproof, seal-less magnetic drive 99.5% pure alumina ceramic shaft and thrust washers for long trouble-free service in use with harsh solutions Self-lubricating carbon impeller bushing which is…

Little Giant® Aquarium series magnetic drive pumps are specifically designed for salt water and fresh water aquarium circulation and filtration applications.

4/10 hp submersible sump pump with cast iron housing (8-CBA and 8-CBM have cast bronze housing), polypropylene base, polycarbonate cover, thermal overload protection. “CIA” and “CBA” models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 1" to 4". 1-1/2" FNPT…

The Franklin Electric 505712 is for submersible use only; this pump is equipped with a 25-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter. Utility Water Pump: For submersible use only; this pump is equipped with a 25-foot power cord, 1-inch FNPT discharge and…

1/3 hp Submersible Effluent Pump with 1/2" solids capability, designed to handle liquids up to 200 °F, 1-1/2" FNPT discharge and integral float switch with “on” level at 11" to 14" and “off” level at 3" to 6".

Little Giant performance, plus energy savings — the ES Series pumps are a line of energy-saving, high performance, fully submersible sump, sewage and effluent pumps designed for the professional plumbing contractor. ES Series Pumps consume less energy while delivering greater pump flow and…