Small submersible pump that works well in marine applications. Pump can be used inline for intermittent use only.

1/3 hp submersible sump pump with cast iron housing, polypropylene base, polycarbonate cover, and thermal overload protection. “CIA” models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 1" to 4". The 6-CIA-RS has a piggyback diaphragm switch with same “on/off”…

Magnetically driven pumps for semi-corrosive chemicals and solutions. The Little Giant® MD-SC series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use. These pumps feature polypropylene, ceramic, and Nitrile parts.

Submersible Effluent Pump available with ? hp, ½ hp, or 1 hp, cast iron motor and pump housing, motor has oil-filled chamber with double ball bearing, designed for hi-torque and is thermally protected with automatic reset (single-phase only), 2? NPT discharge, piggyback mechanical float switch for…

Centrifugal Pump, Magnetic Drive, Ceramic Shaft (7884J25, J45) Non-submersible pumps with leakproof, seal-less magnetic drive 99.5% pure alumina ceramic shaft and thrust washers for long trouble-free service in use with harsh solutions Self-lubricating carbon impeller bushing which is…

1/2 hp Submersible High-Head Effluent Pump designed to handle 3/4" solids. Shut-off at 60', cast-iron base, motor housing and motor cover (thermoplastic cover on SFS models), thermoplastic elastomer non-clog impeller, thermal overload protection, and 1-1/2" FNPT discharge. Automatic "RF" versions…

4/10 hp Submersible High-Head Effluent Pump designed to handle 3/4" solids. Shut-off at 45', cast-iron base, motor housing and motor cover (thermoplastic cover on SFS models), thermoplastic elastomer non-clog impeller, thermal overload protection, and 1-1/2" FNPT discharge. Automatic "RF" versions…

Centrifugal Pump, Magnetic Drive, Stainless Shaft Ideal for OEM applications For continuous, heavy duty pumping of mildly corrosive solutions and suspensions in pH range 5 to 9, having viscosity to 20 cP, at temperatures to 65°C (150°F) Employs magnetic coupling to drive…

4/10 hp Submersible Sewage Pumps designed to handle 3/4" solids. Permanent split capacitor (PSC) motor, heavyduty cast iron housing, volute and cover, non-clog thermoplastic elastomer impeller and thermal overload protection. The "RF" automatic models feature a “piggyback” mechanical float switch…

Little Giant® Aquarium series magnetic drive pumps are specifically designed for salt water and fresh water aquarium circulation and filtration applications.

4/10 hp submersible sump pump with cast iron housing (8-CBA and 8-CBM have cast bronze housing), polypropylene base, polycarbonate cover, thermal overload protection. “CIA” and “CBA” models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 1" to 4". 1-1/2" FNPT…

Little Giant performance, plus energy savings — the ES Series pumps are a line of energy-saving, high performance, fully submersible sump, sewage and effluent pumps designed for the professional plumbing contractor. ES Series Pumps consume less energy while delivering greater pump flow and…

Submersible pumps with Fluoroelastomer (FKM) seals, 1/4" MNPT discharge, master builders conduit fitting, 6' power cord without plug. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory.

Epoxy filled pumps are compact in design, energy efficient, and have a corrosion-resistant plastic housing.

For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild…

1/2 hp submersible sump pump with cast bronze housing, polypropylene base, screened intake and thermal overload protection. Automatic models have integral diaphragm switch with “on” level at 7" to 10" and “off” level at 2" to 5". 1-1/2" FNPT discharge.

For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild…

1/2 hp Submersible High Head Effluent Pump designed to handle 3/4" solids. Shut-off at 50', heavy-duty cast iron housing, volute and impeller, thermal overload protection, and 2" FNPT discharge.

Little Giant performance, plus energy savings — the ES Series pumps are a line of energy-saving, high performance, fully submersible sump, sewage and effluent pumps designed for the professional plumbing contractor. ES Series Pumps consume less energy while delivering greater pump flow and…

Non-submersible self-priming transfer pumps. Both in 115 V and 12 VDC, these models are designed to operate 15 minutes per hour. Model 370 is designed for higher and lower temperatures.

Centrifugal Self-Priming Effluent Pump available with ½ hp or ¾ hp, cast iron casing, higher than NEMA service factor dual compartment motors, built-in check valve facilitates fast priming and guards against siphoning action. Self-priming effluent pumps designed for installations with septic tanks…

These pumps feature an oil-filled motor housing with a radial lip seal on the motor shaft. They have an exceptional life expectancy because oil serves as a continuous lubricant for all the moving parts and the shaft seal. This non-toxic dielectric oil, often paired with an aluminum, cast iron or…

1/4 hp submersible sump pump designed to handle 3/8" solids. Zinc housing, glass-filled polypropylene base and cover, non-clog nylon impeller, thermal overload protection, 1-1/4" FNPT discharge with garden hose adapter and snap-action float switch. “On” level at 7" to 10" and “off” level at 2" to 5".

1/3 hp Submersible Effluent Pump with 1/2" solids capability, designed to handle liquids up to 200 °F, 1-1/2" FNPT discharge and integral float switch with “on” level at 11" to 14" and “off” level at 3" to 6".

1/3 hp Automatic Utility pump with durable reinforced thermoplastic pump casing, continuous duty ?oil free” motor, bottom suction design with built-in strainer to eliminate internal damage from possible debris, removable filter screen for easy cleaning, and 1-1/4? NPT discharge. SP33A features an…

Small submersible oil-filled pump with epoxy coated cast aluminum housing. For commercial, industrial, and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This…

1/2 hp Self Priming Utility pump constructed of durable cast iron with built-in suction check valve engineered to prime itself quickly once it has been filled with water, higher than NEMA standard service factor, dual compartment motor, semi-open, cast iron impeller.

1/6 hp Submersible Utility pump with corrosion-resistant aluminum pump casting, continuous duty ?oil free” motor, bottom suction design with built-in strainer to eliminate internal damage from possible debris, removable filter screen for easy cleaning, and ¾? NPT discharge.

Submersible pump designed to deliver flows in various applications. Durable construction and versatile mounting features designed into the housing.

Self-priming, completely submersible Output 3 1/4 gpm (12 Lpm) at one-foot (0.3 m) head, 2 gpm  (7.5 Lpm) at five-foot (1.5 m) head; maximum pressure 3.2 psi (22 kPa) Continuous-duty, 1.1 ampere motor, sealed and permanently lubricated, enclosed in epoxy-coated, cast-aluminum…

Non-submersible high pressure pump used for carpet cleaners, dispenser displays and pressure washer applications. 3/8" OD barbed intake and discharge, 24" lead wires.

1/4 hp Automatic Utility pump with corrosion-resistant aluminum pump casing, continuous duty ?oil free” motor, bottom suction design with built-in strainer to eliminate internal damage from possible debris, removable filter screen for easy cleaning, and ¾? NPT discharge. SP25A features an automatic…