Pipettor Tips

Compare Tool

Select up to 3 products

HomeAll Products

MBP Pipettor Tips

1 - 32 of 38
Sort
View
Show
  • Tips ensure 100% protection against aerosol and liquid contamination. The SoftFit* tip design and sturdy rack are ideal for multichannel pipettors. Tips also fit most 200µL single-channel pipettors. The ART barrier traps contaminants, keeping them out of pipettors and samples. This also protects…

  • Access tips with one hand using Thermo Scientific™ ART™ Nonfiltered Hinged Rack Pipette Tips, which is designed for the way you work. No longer worry about your tips spilling on your bench or floor. Maximize your productivity and easily transition from hinged to lift-off in just three easy steps.…

  • The only alternative to Rainin LTS™ LiteTouch™ pipet tips PURE™ tips are pre-sterilized 20 µL, 200 µL or 1000 µL liquid volumes SoftFit L tips deliver highly accurate samples, seal well on the pipettor and are easy to seat and eject. Frosted shoulders with the MBP logo make…

  • HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. Wide bore tips are for working with genomic DNA, fragile cell lines and other viscous materials. With a distal end orifice…

  • Wide bore Aerosol Resistant Tips are for working with genomic DNA, fragile cell lines and other viscous materials. ART tips have a self-sealing barrier that seals when exposed to aerosol and liquid contaminants, trapping them inside the barrier to provide protection against carryover contamination …

  • Perform applications accurately and consistently without compromising protection with the Thermo Scientific™ ART™ Barrier Reload System, which provides an environmentally-responsible solution without compromising sterility. With offset wells that allow the tips to stack, this advanced system…

  • Configure Thermo Scientific™ ART™ Nonfiltered Lift Off Racks and Bulk Pipette Tips with Rainin™ LiteTouch™ Pipettes.

  • ART self-sealing barriers trap contaminants, such as aerosols and liquids, keeping them out of pipettors and samples. This allows the user to conduct PCR† procedures and pipet radioactive or infectious samples. ART tips are presterilized and certified RNase-, DNase-, DNA-, and pyrogen-free. All…

  • Proprietary manufacturing technology enables creation of a more hydrophobic tip that allows users to pipet viscous samples, load dyes, surfactants and solvents with greater accuracy. Less sample is retained within the tip which decreases the amount of reagent loss while significantly increasing the…

  • Reduces sample retention Sterile or non-sterile HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don't use additives or coatings that may affect sample integrity. Low retention tips are for applications requiring high accuracy and reproducibility.…

  • Extended length prevents contamination Ergonomic design reduces hand fatigue Available with ART® barrier Fits most 1 mL pipettors 1000 Reach pipet tips have extended lengths to prevent contamination by keeping the pipettor shaft from entering the sample vessel. SoftFit design reduces hand…

  • Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…

  • Tips ensure 100% protection against aerosol and liquid contamination. These tips provide an ideal fit for most 1000µL pipettors. The ART barrier traps contaminants, keeping them out of pipettors and samples. This also protects the sensitive inner components of the pipettor, prolonging pipettor…

  • Clear versions of Tecan tips are designed for researchers not using the conductive features of their platforms or requiring visual confirmation of their pipetting. These crystal clear tips are available in four sizes, sterile or non-sterile and with or without the ART barrier. Tips fit Tecan…

  • Low retention tips are designed to reduce sample retention. Molded from virgin polypropylene, they do not use additives or coatings that may affect sample integrity. Low retention tips ensure reduced sample loss due to adhesion, allowing for more accurate dispensing and an increased level of…

  • BioRobotix pipet tips help you get more out of your Tecan workstation. 20 µL and 50 µL liquid-sensing and clean Tecan tips increase the precision of low volume pipetting by minimizing dead air volume within the tip. All Tecan tips come in a hermetically sealed blister pack. These…

  • Self-sealing filter tip protects pipettors from crossover contamination by not allowing liquids or aerosols to touch pipettors. Free of pyrogens, DNA, RNA, Rnase, and DNase. Presterilized. Individually wrapped.

  • Fits Perkin-Elmer/Packard Multiprobe II HT and Multiprobe II HT EX with Hanging Tips Multiprobe hanging tips are designed specifically for the Multiprobe II HT ensuring a superior fit. Offered in clear or liquid sensing versions.

  • The 10 µL Biomek FX tip does not have the large air gap found when trying to pipet 10 µL or less with the 20 µL tip. Tips fit Beckman Biomek FX/NX, Multimek AP 96 and Biomek 3000. Genomic (wide bore) tips are also available.

  • MBP is the exclusive manufacturer of the 96-well format Caliper Automation Certified Pipet Tips. Tips are manufactured to exacting specifications. Racks provide the sturdiness required by automation equipment and tips are designed with exceptional straightness. All tips are certified DNase and…

  • Aerosol Resistant Tip Individually Wrapped Pre-Sterilized Certified Pure

  • Reduce waste and save bench top and storage space with the advanced Thermo Scientific™ ART™ Nonfiltered Reload System. This system provides an environmentally-responsible option without compromising sterility. Features: Stackable barrier tip packaging allows for tips to pass through offset…

  • HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. Graduated versions are marked at 10, 50, 100 and 200 µL.

  • Pre-sterilized Racked Loading acrylamide or agarose gels with standard pipet tips can be time consuming. Specialty ARTS (Aerosol Resistant Tips) tips are self-sealing for gel loading and protect against carryover and cross-contamination.

  • Protects against solvents Eliminates carryover contamination problems SolventSafe tips feature a new ART (Aerosol Resistant Tips) formula with Folded Activated Carbon to provide pipettor and sample protection against destructive carryover aerosols and vapors from volatile organic solvents…

  • Large orifice tip Purple rack Low Adhesion Tip orifice inside diameter is 0.059 inches (1.50 mm) Universal fit

  • Guaranteed tip purity for increased precision and accuracy Rigid rack design Precision MBP molding Certified RNase, DNase, DNA pyrogen-free Fits a variety of automated workstations 384-well tip design ensures precise pipetting for volumes of 30 µL or less. Manufactured using non-wettable…

  • Tips with ART® self-sealing barrier Clear Pre-sterilized 20 µL, 200 µL or 1000 µL liquid volumes Bi-fabricated wall of ART Ergonomic Tip creates a strong, effective seal while requiring significantly lower tip insertion and tip ejection force. Certified…

  • Racked Pre-sterilized

  • 1-200ul, with Graduations at 10, 50, and 100 uL, Sterile, 96 Tip Hinged Rack, 4,800 per case, Color: Yellow Best Fit Gilson, Eppendorf, MLA, Nichiryo, Oxford

  • Bulk Non-Sterile These premium-grade, virgin polypropylene MBP ART Pipette Tips have a patented self-sealing barrier that seals when exposed to potential aerosol and liquid contaminants, trapping them inside the barrier. Unlike ordinary filters, no contaminants can pass through to your…

  • HydroLogix Tips are designed to reduce sample retention. Molded from virgin polypropylene, they don’t use additives or coatings that may affect sample integrity. 1200 µL models fit Biohit Proline pipettors while 1250 and 1300 µL models fit Matrix pipettors.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.