High-quality borosilicate glass, plain or cotton-plugged Designed from ASTM E732 specifications Ungraduated with square-cut ends Tip length of all 5 3/4" pipets is approximately 50 mm. Tip length of all 9" pipets is approximately 120 mm. Constriction approximately 25 mm from…

Volumetric pipets are ideal for measuring accurate volumes of liquids. Letters "TD" on the pipet indicate to deliver Sizes 1mL and larger are marked with large numerals on the bulb, indicating capacity Color-coded (ASTM E1273) for ease in sorting and selecting the…

Calibrated To Deliver (TD) Color coded Designed from ASTM Specification E969, Class A requirements 75 and 200mL sizes are designed from ASTM E542 Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

Pipet, Color-Coded With Fused Scale Made from uniform-bore N51A tubing Designed from ASTM Specification E 1293, Style 1, Class B requirements Graduated between points above Safe-Gard tempered tip 50 mL size is not color-coded; calibrated to deliver Tolerances: 1/10 mL…

Standard cotton-plug type, but plug is not supplied. N-51A glass. Designed from ASTM E1044, Style II requirements. Pipets are calibrated to tip; with volume adjusted for blowing out the last drop. Designated by a ground band near the top. Sizes 5 mL and larger are constricted to retain plug, but…

Sterile, cotton-plugged, bagged N-51A borosilicate glass; color-coded, graduated scale Designed from ASTM Standard E-714 Tolerances: 1 mL pipet, ±0.02 mL ; 2 mL pipet, ± 0.4 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.30 mL Calibrated to tip, for blow-out, 7536S55 pipet is ungraduated below…

Calibrated To Contain (TC) and To Deliver (TD) to Class A tolerances TC feature accommodates use with viscous liquids Color coded Unserialized Designed and manufactured to ASTM E969 requirements Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438,…

Ideal for use in tissue culture work and other procedures performed under a fume hood or in other confined areas Calibrated to deliver with blow-out Reverse and negative calibrations Sterile Plugged Disposable serological pipets are packaged in color-coded, paper/plastic…

Econo-Pak Economy priced Plain or cotton-plugged Ungraduated with long capillary tips approximately 1 mm id Body of pipet is approximately 7 to 7.5 mm outside diameter with small constriction approximately 30 mm from the upper end to retain a cotton plug. Tip length of all 5…

Soda-Lime Glass, Disposable Pipets are 5" long with a single black capacity ring Tolerance ±1% for 5 µL size, ±0.5% for all other sizes; color-coded Sold in cases containing four dispensing cylinders of 250 Pipets are 5 inches long with a single black…

Gamma-irradiated to ensure sterility 250-piece multipack configuration 10 peel packs of 25 each Available in both 5 3/4” and 9” lengths Choice of cotton plugged or unplugged Constricted top (for cotton plugging) Easy-to-open, sterile packaging peels back at the corner

Sterile, cotton-plugged, individually wrapped Individually wrapped in resealable plastic bags Borosilicate glass Tolerances: 1/2 mL pipet,± 0.013 mL ; 1 mL pipet, ±0.02 mL ; 5 mL pipet, ± 0.15 mL ; 10 mL pipet, ±0.3 7536T48 pipets have black markings: remaining sizes have blue markings.

Pipet, KIMAX-51, Color-Coded, Serialized Similar to 7464D13 series, but is Class A serialized Pipet has a Safe-Gard tempered tip and meets ASTM specification E 694

The most commonly used volumetric pipet in general laboratory work. Color coded Designed from ASTM Specification E969, Class B requirements Manufactured from 51 expansion borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class B requirements

Calibrated to deliver Tempered tops and tips to resist breakage Chemical resistant and intended for laboratory work Marked, in permanent brown stain, with large numerals on the bulb, indicating capacity Supplied unserialized Colour-coded (ASTM E1273) for easy identification Made…

Calibrated "to deliver" N-51A borosilicate glass Not sterilized or cotton-plugged Size 10 mL has constriction near top, forming chamber in which protective cotton plug can be inserted 7536U86 contain five shelf packs of 100 each.

Color-Coded, SAFE-GARD Tempered Tip Calibrated to deliver Ideal for bacteriology or microbiology KIMAX-51 glass highly resistant to scratching and chemical attack. Scale is permanent brown stain fused into the surface without etching. All pipets are graduated to the tip and have…

Disposable, Glass, To Deliver, Plugged, Sterile, Non-Pyrogenic, Canister Pack, Color-Coded Pipets ave a uniform pulled tip and are clean, plugged, sterile and ready for use. Calibrated to deliver to the tip, with two rings near the top denoting that the small amount remaining in the tip after…

Kimble Kimax-51, APHA, Glass For milk and milk dilutions Blunt tip Calibrated to the tip, with volume adjusted for blowing out the last drop of undiluted milk or touching off the last drop of milk dilutions Fused-on markings provide sharp contrasts Size 1.1 mL is color-coded Tips are…

Class A, color-coded, unserialized Calibrated "to deliver" Serial numbers are omitted and minor imperfections in appearance that will not affect usefulness are permitted Tips Safe-Gard ® tempered

Made of heavy duty clear-view acrylic with 5 angled compartments that can store pipettes from 1 to 100mL. Accommodates two pipette controllers on the top.

These pipets are excellent for serological, tissue culture work, and mass testing. Sterile, non-pyrogenic, and DNase/RNase-free Pipets have a uniform pulled tip and are clean, plugged, sterile and ready for use Calibrated To Deliver (TD) to the tip Provided with…

Reusable, To Deliver, Class A, Color-Coded, Serialized and Certified KIMAX pipet has a permanently marked individual serial number and is autoclavable. Supplied with a Certificate of Graduation Accuracy. Carefully selected to meet the requirements for accuracy, appearance, glass quality,…

Pipets have a uniform pulled tip and are clean, plugged, sterile and ready for use Calibrated to meet APHA requirements for making milk dilutions 1228R00 is suitable for use in the milk phosphatase test

Non-pyrogenic Pipets have a uniform pulled tip and are clean, plugged, sterile and ready for use Calibrated To Deliver (TD) to the tip Provided with “negative” graduations to increase the versatility of the pipet 72105 series is packaged in color-coded paper/plastic…

Sterile Disposable Plugged Calibrated “to deliver” Wide tip glass pipets are sterile, disposable, plugged and suitable for transferring viscous or suspended liquids. Pipets are multi-packed in plastic bags (200 pieces each) to protect against contamination.

Disposable, plugged, polystyrene pipet with uniform pulled tip. Calibrated for the measurement of undiluted and diluted milk, as prescribed in “Standard Methods for Analysis of Dairy Products,” American Public Health Association. Polystyrene milk pipet has a uniform pulled tip …

Reusable, To Deliver, Class A, Color-Coded, Unserialized KIMAX pipet of rugged construction. Designed from ASTM Specification E969, Class A requirements. These pipets are made in compliance with ASTM Specification E1273 for color coding.

Calibrated to contain. Scale is permanent brown stain. Marked "Sealed 3". Designed to comply with the Pennsylvania modified Babcock method, as referenced in APHA 15.8, for testing skim milk, lowfat milk, buttermilk or whey.

Color-Coded, Unserialized, Fast Delivery Tolerances within twice those established by U.S. National Bureau of Standards for transfer pipets Designed from ASTM Specifications E 969, Class B requirements Delivery faster than Class A pipets Tips Safe-Gard® tempered Calibrated "to deliver"

Class A, color-coded, serialized Calibrated "to deliver" Serially numbered and marked with “A” to signify adherence to accuracy specifications in ASTM Standard E 969 for Class A Certificate of Graduation Accuracy Tips Safe-Gard® tempered