Immersion depth is 1 mm and requires only 0.5 mL of sample. pH range is 0-14. Temperature range: -5 to 100°C. Dimensions: 120 mm x 6 mm; tip diameter: 1.3 mm. Type reference: Ag/Ag/Cl.

Time is Precious Liquid filled electrodes are reliable workhorses, constructed for efficient pH measurements in daily laboratory use of a wide application range. For more complex sample matrices like emulsions or biological media, electrodes with a sleeve junction are recommended. InLab…

Accept the Challenge The measurement of solid or semi-solid samples is challenging and requires sensors that are robust, ensure proper electrolyte flow and are easy to clean. Sensors with these properties are often requested for food or cosmetic applications. A special membrane glass and…

Electrochemical sensors are used in a wide variety of applications. METTLER TOLEDO offers a similarly wide variety of select products to help you find the ideal solution for your precise application. Their range focuses on the correct combination of high-quality materials, tried-and-tested…

pH and temperature measurement with one electrode Superior stability with high accuracy pH and temperature measurement Fast pH response even in samples at varying temperatures Compatible with Mettler-Toledo TM Five and Seven Series meters and others which accommodate NTC30 thermisters with…

4210S12 Polymer membrane electrodes measure nitrate concentration in the range of 14,000 to 0.1 ppm in soils, plant materials, fertilizers, pickling baths and other aqueous solutions. Other uses listed in Standard Methods. EPA approved for NIPDWR compliance monitoring Optimal temperature range…

Nothing is Impossible The more precious or limited the sample, the greater the challenge to use it for analysis. The narrow sensor shaft of micro pH sensors fits in nearly every sample container and enables measurements of sample volumes down to the lower μL ranges. InLab Flex-Micro:…

Conduct routine pH measurements with the Thermo Scientific™ Orion™ Economy Series pH Combination Electrode, a routine wick junction, gel-filled electrode. Its unbreakable epoxy body extends beyond the pH sensing glass bulb for rugged conditions. It provides durability for lab or field…

Superior stability pH range 0-14 Temperature of 0°-100°C 3 M KCl filling solution supplied with electrode

Waterproof connector pH range: 0-14 Temperature range: 0-90°C Designed specifically for use with Thermo Orion’s 260A and 265A pH meters. Sealed epoxy body with Ag/AgCl reference. Dimensions: 110 mm x 12 mm.

Permanently gelled Ag/AgCl electrolyte 0 to 12 pH range 0° to 80°C (32° to 176°F) temperature range Wick junction 5.93 in. long (15cm) x 0.25 in. diameter (6mm) body, 0.18 in. diameter (10mm) cap BNC Connector A routine wick junction, gel-filled pH measurement…

4210B10 Optimal temperature range: 0 - 40°C Constructed with a clog-free Sure-Flow junction. Includes 60 mL of refill solution. Uses easily replaceable 4210B03 plastic membrane module. 4210B13 Highly selective for calcium over other divalent cations Polymer-membrane electrode measures…

Measure the pH of virtually any sample with these Thermo Scientific Orion pH electrodes. Electrodes come with a low cost epoxy body Sealed, gel-filled design means there is little electrode maintenance to perform Single-junction reference means electrodes are suited to most general…

Immersion depth is 2 mm, designed for NMR cells. pH range is 0-14. Temperature range is -5 to 100°C. Dimensions: 228 mm x 2.5 mm; tip diameter: 2.5 mm. Type reference: Ag/AgCl.

Free of lead and mercury unlike many pH electrodes allowing easy disposal Meets all RoHS requirements Durable plastic body that can be used under rugged conditions Waterproof BNC connector is impervious to water Orion green electrodes offer a lab or field pH electrode that…

4210F12 For determination of fluoride ion activity in concentrations from saturated to 10 -6 M (0.02 ppm) Method approved by ASTM for water, drinking water, wastewater and seawater brines and it is approved by EPA, Standard Methods and AOAC for feeds Range saturated to 0.02 ppm Requires…

Useful Helpers - When Two are Better Than One In some cases it is advisable to use a separate pH half-cell and reference electrode instead of a combined pH sensor. pH half-cells are recommended for applications in which the service life of the pH electrode is significantly less than that of…

Always Ready Well-equipped for challenging tasks. The highly robust PEEK shaft in combination with the open junction makes the InLab Expert both resilient and easy to handle. Its solid reference electrolyte requires no refilling and is always ready for use. If highest performance is expected,…

4215F10 Mercury-free, Ag-AgCl type, with sleeve junction. Designed for use with Thermo Orion ion-selective electrodes as indicated in respective descriptions; usable also with glass electrodes for pH measurement. Range 10 to 100°C. Length 140 mm, diameter 13 mm. Diameter of mounting cap 16 mm. …

Triode, gel-filled combination electrode with epoxy body for durability Waterproof E DIN connection with a 1 m cable and banana plug connectors Measures pH and temperature with built-in ATC Ag/AgCl (silver/silver chloride) electrolyte for less noise than gold or silver electrodes pH…

4210N68 Requires Thomas number 4215F60 reference electrode. Includes 760 mm lead. Uses Orion 900002 fill solution, order as 4215F70. Accessories Chloride Standard, 0.1000 ±0.0005M Chloride Standard, 100.0 ±0.5 ppm Ionic Adjustment Solution, Sodium Nitrate…

Combination pH and ATC in a single barrel pH range: 0-14 Temperature range: 0-90°C Recommended for general purpose use. Built-in thermistor for automatic temperature compensation. Useful for field pH measurements with Thermo Orion portable pH meters. BNC type connector. ATC…

Reach New Depths The extra-long shaft allows measurements in deep vessels, barrels or pilot reactors. InLab Reach 225: A glass-body, combination pH electrode with S7 screw head and 225 mm long shaft for general application. InLab Reach 425: A glass-body, combination pH electrode…