NEW! Organic Synthesis

Compare Tool

Select up to 3 products

HomeAll Products

NEW! Organic Synthesis

1 - 32 of 3321
Sort
View
Show
  • Silicone oil, for oil baths, 25 to 250°C (open system) and 25 to 315°C (closed…

    BeanTown Chemical

    CAS: 68083-14-7 MDL No: MFCD00132673 RTECS: VW3146875 Oil Linear Formula: [-Si(CH3)2O-]m[-Si(C6H5)2O-]n Flash Point: >300°C (>572°F) Density (g/mL): 1.07 Refractive Index: 1.505

  • 4-Dimethylaminobenzaldehyde, ACS, 99%

    BeanTown Chemical

    CAS: 100-10-7 EC No: 202-819-0 MDL No: MFCD00003381 RTECS: CU5775000 Solid Molecular Formula: C9H11NO MW: 149.19 Melting Point: 72-75°

  • Cyclohexene (Stabilized) For Synthesis

    MilliporeSigma

    CAS No.: 110-83-8 pH: 7 - 8 (0.2 g/l, H2O, 20°C) Solubility: 0.21 g/l (20°C) Melting Point: -104°C Molar Mass: 82.14 g/mol Boiling Point: 83°C (1013 hPa) Vapor Pressure: 90 hPa (20°C) Flash Point: 1.2 - 7.7 %(V) Refractive Index: -20°C DIN 51755 Part 1 Density: …

  • Sodium Borohydride Fine Granular For Synthesis

    MilliporeSigma

    CAS No.: 16940-66-2 pH: 11 (10 g/l, H2O, 20°C) Solubility: 550 g/l (25°C) (slow decomposition) Melting Point: 400°C (slow decomposition) Molar Mass: 37.83 g/mol Bulk Density: 350 - 500 kg/m3 Boiling Point: 500°C (decomposition) Explosion Limit: 3.02 %(V) Density: 1.07 g/cm3…

  • Iodine, resublimed crystals, ACS, 99.8% min.

    BeanTown Chemical

    CAS: 7553-56-2 EC No: 231-442-4 MDL No: MFCD00011355 RTECS: NN1575000 UN No: UN3495; Haz Class: 8 (6.1); Packing Group: III Crystalline Molecular Formula: I2 MW: 253.81 Melting Point: 113° Boiling Point: 184° Density (g/mL): 4.94

  • N,N,N',N'-Tetramethyl-1,4-Phenylenediammonium Dichloride For Synthesis

    MilliporeSigma

    CAS No.: 637-01-4 Solubility: (20°C) soluble Melting Point: 227 - 230°C (decomposition) Molar Mass: 237.17 g/mol

  • Tween® 80 For Synthesis

    MilliporeSigma

    CAS No.: 9005-65-6 pH: 5 - 7 (50 g/l, H2O, 20°C) Solubility: (20°C) soluble Boiling Point: >100°C (1013 hPa) Flash Point: >149°C Density: 1.07 g/cm3 (25°C) Ignition Point: >180°C Viscosity Kinematic: 300 - 500 mm2/s (25°C)

  • 2-Methyltetrahydrofuran (Stabilised With 2,6-Di-Tert-Butyl-4-Methylphenol) For…

    MilliporeSigma

    CAS No.: 96-47-9 Solubility: 150 g/l (25°C) Melting Point: -136°C Molar Mass: 86.13 g/mol Boiling Point: 78 - 80°C (1013 hPa) Vapor Pressure: 136 hPa (20°C) Flash Point: -11°C Refractive Index: 1.4056 (20°C, 589 nm) Explosion Limit: 1.2 - 5.7 %(V) Density: 0.86 g/cm3…

  • Glyoxal (40% Solution In Water) For Synthesis

    MilliporeSigma

    pH: 2 - 3.5 (400 g/l, H2O, 20°C) Solubility: (20°C) soluble Melting Point: -14°C Boiling Point: 104°C (1013 hPa) Vapor Pressure: 20.2 hPa (20°C) Flash Point: >84°C Refractive Index: 1.3826 (20°C, 589 nm) Density: 1.27 g/cm3 (20°C) Ignition Point: 285°C

  • 2-Methoxyethylamine For Synthesis

    MilliporeSigma

    CAS No.: 109-85-3 pH: 12 (100 g/l, H2O, 20°C) Solubility: (20°C) soluble Melting Point: -82°C Molar Mass: 75.11 g/mol Boiling Point: 95°C (1013 hPa) Flash Point: 12°C Refractive Index: 1.4594 (20°C, 589 nm) Explosion Limit: 3 - 16.10 %(V) Density: 0.87 g/cm3 (20°C) …

  • Diethyl Succinate For Synthesis

    MilliporeSigma

    CAS No.: 123-25-1 Solubility: 2.00 g/l (25°C) Melting Point: -20°C Molar Mass: 174.19 g/mol Boiling Point: 215 - 217°C (1013 hPa) Vapor Pressure: 1.33 hPa (55°C) Flash Point: 80°C Refractive Index: 1.42 (20°C, 589 nm) Density: 1.04 g/cm3 (20°C)

  • 4-Hydroxy-4-Methyl-2-Pentanone For Synthesis

    MilliporeSigma

    CAS No.: 123-42-2 Solubility: (20°C) soluble Melting Point: -47°C Molar Mass: 116.16 g/mol Boiling Point: 168°C Vapor Pressure: 1.1 hPa (20°C) Flash Point: 58°C Refractive Index: 1.4233 (20°C, 589 nm) Explosion Limit: 1.8 - 6.9 %(V) Density: 0.94 g/cm3 (20°C) Ignition…

  • Dimethylammonium Chloride For Synthesis

    MilliporeSigma

    CAS No.: 506-59-2 pH: 5 (100 g/l, H2O, 20°C) Solubility: 3000 g/l (20°C) Melting Point: 160°C Molar Mass: 81.54 g/mol Bulk Density: 500 kg/m3 Vapor Pressure:

  • 2-Phenylethanol For Synthesis

    MilliporeSigma

    CAS No.: 60-12-8 pH: 6 - 7 (20 g/l, H2O, 20°C) Solubility: 20 g/l (20°C) Melting Point: -27°C Molar Mass: 122.16 g/mol Boiling Point: 219°C (1013 hPa) Vapor Pressure: 0.08 hPa (20°C) Flash Point: 101.5°C Refractive Index: 1.5325 (20°C, 589 nm) Explosion Limit: …

  • Acetic anhydride, 99%

    BeanTown Chemical

    CAS: 108-24-7 EC No: 203-564-8 MDL No: MFCD00008705 RTECS: AK1925000 UN No: UN1715; Haz Class: 8 (3); Packing Group: II Liquid Linear Formula: (CH3CO)2O MW: 102.09 Melting Point: -73° Boiling Point: 138-140° Flash Point: 49°C…

  • Aniline For Synthesis

    MilliporeSigma

    CAS No.: 62-53-3

  • Tetramethylammonium Hydroxide (25% Solution In Water) For Synthesis

    MilliporeSigma

    pH: >13 (H2O, 20°C) Solubility: (20°C) soluble Boiling Point: 110°C (1013 hPa) Vapor Pressure: 23.33 hPa (20°C) Density: 1.02 g/cm3 (20°C)

  • 5-(Trifluoromethyl)dibenzothiophenium trifluoromethanesulfonate, 97%

    BeanTown Chemical

    CAS: 129946-88-9 MDL No: MFCD00236132 Crystalline/Powder Molecular Formula: C14H8F6O3S2 MW: 402.33 Melting Point: 150°

  • Polyethylene Glycol 400 For Synthesis

    MilliporeSigma

    CAS No.: 25322-68-3 pH: 5 - 7 (100 g/l, H2O, 20°C) Solubility: (20°C) soluble Melting Point: 4 - 8°C Molar Mass: 8000 g/mol Boiling Point: >200°C (1013 hPa) Vapor Pressure: Flash Point: 240°C Density: 1.13 g/cm3 (20°C) Ignition Point: 360°C DIN 51794 Viscosity…

  • Diethylene Glycol Monoethyl Ether For Synthesis

    MilliporeSigma

    CAS No.: 111-90-0 Solubility: (20°C) soluble Melting Point: -78°C Molar Mass: 134.17 g/mol Boiling Point: 202°C (1013 hPa) Vapor Pressure: 0.13 hPa (20°C) Flash Point: 96°C Refractive Index: 1.4293 (20°C, 589 nm) Explosion Limit: 1.8 - 12.2 %(V) Density: 0.99 g/cm3…

  • Maleic Anhydride For Pharma Synthesis, Non-GMP

    MilliporeSigma

    CAS No.: 108-31-6 pH: 0.8 (550 g/l, H2O, 20°C) Hydrolysis Solubility: (20°C) soluble,(decomposition) Melting Point: 51 - 53°C Molar Mass: 98.06 g/mol Bulk Density: 700 - 800 kg/m3 Boiling Point: 202°C (1013 hPa) Vapor Pressure: 2.8 hPa (52.9°C) Flash Point: 103°C …

  • Maleic Anhydride For Synthesis

    MilliporeSigma

    CAS No.: 108-31-6 pH: 0.8 (550 g/l, H2O, 20°C) Hydrolysis Solubility: (20°C) soluble,(decomposition) Melting Point: 51 - 53°C Molar Mass: 98.06 g/mol Bulk Density: 700 - 800 kg/m3 Boiling Point: 202°C (1013 hPa) Vapor Pressure: 2.8 hPa (52.9°C) Flash Point: 103°C …

  • 1-Chlorobutane For Synthesis

    MilliporeSigma

    CAS No.: 109-69-3 pH: (H2O) not applicable Solubility: 0.5 g/l (20°C) Melting Point: -123°C Molar Mass: 92.57 g/mol Boiling Point: 79°C (1013 hPa) Vapor Pressure: 110 hPa (20°C) Flash Point: -17°C Explosion Limit: 1.8 - 10.1 %(V) Density: 0.886 g/cm3 (20°C) Ignition…

  • N-Hexadecane For Synthesis

    MilliporeSigma

    CAS No.: 544-76-3 Solubility: (20°C) insoluble Melting Point: 18°C Molar Mass: 226.44 g/mol Boiling Point: 287°C Vapor Pressure: Flash Point: 135°C Density: 0.77 g/cm3 (20°C) Viscosity Kinematic:

  • Hydroxylammonium Chloride For Synthesis

    MilliporeSigma

    CAS No.: 5470-11-1

  • Hexadecyltrimethylammonium Bromide For Synthesis

    MilliporeSigma

    CAS No.: 57-09-0 pH: 5 - 7 (50 g/l, H2O, 20°C) Solubility: 0.192 g/l (20°C) Melting Point: 250 - 256°C Molar Mass: 364.45 g/mol Bulk Density: 390 kg/m3

  • Diethylene Glycol Monobutyl Ether For Synthesis

    MilliporeSigma

    CAS No.: 112-34-5 pH: (H2O, 20°C) neutral Solubility: (20°C) soluble Melting Point: -68°C Molar Mass: 162.23 g/mol Boiling Point: 226 - 234°C (1013 hPa) Vapor Pressure: 0.1 hPa (20°C) Flash Point: 105°C Refractive Index: 1.4258 (27°C, 589 nm) Explosion Limit: …

  • Trioctylamine For Synthesis

    MilliporeSigma

    CAS No.: 1116-76-3 pH: 7 (0.4 g/l, H2O, 20°C) Solubility: Melting Point: -39°C Molar Mass: 353.68 g/mol Boiling Point: 365 - 367°C (1013 hPa) Vapor Pressure: Flash Point: 168°C Refractive Index: 1.4485 (20°C, 589 nm) Density: 0.81 g/cm3 (20°C) Ignition Point: 315°C

  • Thionyl Chloride For Synthesis

    MilliporeSigma

    CAS No.: 7719-09-7 pH: (H2O) not applicable Solubility: (20°C) (rigorous decomposition) Melting Point: -104.5°C Molar Mass: 118.97 g/mol Boiling Point: 76°C (1013 hPa) Vapor Pressure: 121 hPa (20°C) Refractive Index: 1.517 (20°C, 589 nm) Density: 1.64 g/cm3 (20°C)

  • Hydrazin Hydrate (80% In Water) For Synthesis

    MilliporeSigma

    pH: >12 (510 g/l, H2O, 20°C) Solubility: (20°C) soluble Melting Point: -60°C Boiling Point: 117 - 119°C Vapor Pressure: 13 hPa (20°C) Flash Point: 73°C Explosion Limit: >4.7 - 99 %(V) (refers to pure substance) Density: 1.02 g/cm3 (20°C) Ignition Point: 310°C

  • 4-Methoxyphenol For Synthesis

    MilliporeSigma

    CAS No.: 150-76-5 pH: 5.1 (30 g/l, H2O, 20°C) Solubility: 40 g/l (25°C) Melting Point: 54 - 57°C Molar Mass: 124.14 g/mol Boiling Point: 243°C (1013 hPa) Vapor Pressure: 0.13 hPa (60°C) Flash Point: 133°C Density: 1.25 g/cm3 (20°C) Ignition Point: 445°C

  • Aluminium Chloride Anhydrous Powder Sublimed For Synthesis

    MilliporeSigma

    CAS No.: 7446-70-0 pH: 2.4 (100 g/l, H2O, 20°C) Solubility: 450 g/l (20°C) (decomposition) Melting Point: 180 - 181°C (sublimed) Molar Mass: 133.34 g/mol Bulk Density: 1200 kg/m3 Vapor Pressure: 1 hPa (20°C) Density: 2.44 g/cm3 (20°C)

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.