Industrial Ball Mill Grinder Machines
-
Mid-Size Poly-Vial Grinding Vial Set
SPEX SamplePrepFor grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonateencapsulated steel. Vial set includes one complete vial plus three extra center cylinders. Sample capacity up to 25 mL. Must be used with 6884 and 6886 Adapters.
-
Tungsten Carbide-Lined Vial Set
SPEX CertiPrepTungsten Carbide-Lined Vial Set, 3/4 x 2in: 3/4 in. (19.1 mm) diameter x 21/8 in. (54 mm) long. Includes two slip-on Delrin® caps with tungsten carbide inserts, six disposable methacrylate center cylinders, and two 5/16 in. (7.9 mm) tungsten carbide balls. Volume 5 mL; grinding load…
-
Grinding Containers and Accessories
SPEX SamplePrepHardened Steel Grinding Container: Grinding container with puck, dish, and lid made of 52-100 hardened tool steel. 6.9 in. diameter x 2.9 in. high, 17.5 lbs. (17.5 cm x 7.5 cm, 8 kg). Nominal volume 340 mL, recommended grinding load 20-50 mL. Includes puck, ring, dish with Oring gasket, and lid. …
-
Cyclone Mill Twister
Retschideal for grinding feeds, grains, forage and other similar products 3 controlled speeds cyclone separator with 250 ml collecting bottle for quick extraction of sample no cross contamination thanks to easy cleaning convenient operating panel professional industrial design with long lifetime …
-
Mid-Size Polycarbonate Center Cylinders for 6881, 6883, and 6885
SPEX SamplePrepFor 6881, 6883, and 6885 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.
-
-
8000M Mixer/Mill
SPEX SamplePrepHigh-energy ball mill that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst supports, glass,…
-
8000D Mixer/Mill®
SPEX SamplePrepHigh-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst…
-
Racks, Clamps and Holders for the 2000 Geno/Grinder
SPEX SamplePrep2190 Vial Rack : Holds 24 3116PC vials, 24 2241-PC vials, or 24 2241-PE vials. All three vials hold a single 3/8 in. (9.5 mm) steel grinding ball 2195 Large Capacity Clamp Assembly : An oversize clamp that will hold centrifuge tubes or a double load of titer plates. Designed to hold twelve…
-
Large Cr-Free Grinding Vial Set
SPEX SamplePrepFor grinding electronic components to test for chromium under RoHS/WEEE directives. Cr-free ASTM 06 steel impactor and end plugs, polycarbonate center cylinder (6801C). Will not add Cr like stainless steel components of 6801 vial. Set includes one complete vial plus three extra cylinders. Sample…
-
POLYMIX® PX-MFC 90 D Dry Mills
KinematicaThe MFC 90D Dry Mill allows you to deagglomerate dry, raw material before processing to ensure a problem-free production process for Quality Control and Analysis Testing. KINEMATICA offers a pilot sized cry mill that is available as an impact mill for hard and brittle products (ie. Pebbles, Dried…
-
Titer Plates and Cap-Mats for the 2000 Geno/Grinder
SPEX SamplePrepWhile most titer plates can be used in the Geno/Grinder, these sturdy titer plates have been tested extensively with various samples, and resist perforation by steel grinding balls even at high clamp speeds. They can be used for many applications including sample libraries, mother-to-daughter…
-
Small Polycarbonate Center Cylinders for 6751, 6761, and 6771
SPEX SamplePrepFor 6751 vial set; sold in units of 4. Also sold in units of 20. Polycarbonate is durable but should be cleaned with hot water and detergent, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.
-
-
Laboratory Jar Mills Series 8000
Advanced Ceramics ManufacturingSingle-tiered unit for processing a variety of composite material Variable speed, 10 to 260 rpm Unique, disposable HDPE jars Quiet- no chains or belts These unique lab mills will operate continuously for long periods of time for powder processing. Selection of HDPE disposable jars in sizes…
-
Vials and Vial Sets for the 2000 Geno/Grinder®
SPEX SamplePrepVial sets are an alternative to titer plates. These vial sets are pre-cleaned with grinding balls included. They come in sturdy carriers that have about the same footprint and height as deep-well titer plates, and fit the Geno/Grinder Clamp. Vials can be filled and sealed individually, and the…
-
-
IKA MultiDrive Crusher
IKA WorksRegardless of whether samples are hard, soft or fibrous – the IKA MultiDrive crusher can perform a wide range of crushing tasks involving coarse and fine crushing, thanks to the variety of vessels available (vessels not included in delivery). With the MultiDrive basic it is possible to mix or…
-
Polyethylene Vials with Caps
SPEX SamplePrepPolystyrene Vial w/Slip-On Cap, 3/4 x 2 in.: 3/4 in. (19.1 mm) diameter x 2 in. (50.8 mm) long. Includes slip-on polyethylene cap. Volume 12 mL; mixing load approximately 5 mL. Accepts SPEX SamplePrep 3112, 3119, or 8006A methacrylate balls. Sold in units of 100. Polycarbonate Vial w/SlipOn…
-
Burundum Cylindrical Grinding Media
US StonewarePellets for wet or dry milling Long wearing for non-contaminating grinding Tough, hard, non-porous surface is chip resistant, easily cleaned and unaffected by most acids or alkalies Non-conductive, non-magnetic with excellent resistance to mechanical and thermal shock Model…
-
-
8000D Mixer/Mill® Accessories
SPEX SamplePrepMultiple Sample Adapter for Seven 1/2 Inch Vials: Holds seven vials, each 1/2 in. (12.7 mm) in diameter, for simultaneous running in 8000M Mixer/Mill®. Suitable vials include SPEX SamplePrep 3111, 3114, 3116 and 3117. Vials run at one time should be same length. Can be used in 8000D…
-
Knife Mill GRINDOMIX GM 300
RetschThe knife mill GRINDOMIX GM 300 is the ideal instrument for the grinding and homogenization of foodstuffs. It allows to process sample volumes up to 4.5 liters quickly and reproducibly. With four sharp, robust blades and a powerful motor which can reach temporary peaks of 3 kW, it is ideal for…
-
Small Grinding Vials Accessories
SPEX SamplePrepExtractor/Vial Opener for Small Grinding Vials: The Extractor/Vial Opener lifts 6700-series vials in and out of the Freezer/Mill, and is used to remove the vial end plugs from the center section. One 6754 is supplied with each 6770 Freezer/Mill and as part of the 6870S Accessory Package. …
-
CryoMill
RetschThe CryoMill is tailored for cryogenic grinding. The grinding jar is continually cooled with liquid nitrogen from the integrated cooling system before and during the grinding process. Thus the sample is embrittled and volatile components are preserved. The liquid nitrogen circulates through the…
-
Small Poly-Vial Grinding Vial Set
SPEX SamplePrepFor grinding soft tissues without metal contamination. End plugs and center cylinder are polycarbonate, impactor is polycarbonate-encapsulated steel. Set includes one complete vial plus three spare center sections. Sample capacity 0.5 mL to 4.0 mL
-
-
Grinding Balls and Accessories for Geno/Grinder
SPEX SamplePrep2100 Grinding Ball Dispenser: Simultaneously dispenses one 5/32 in. (4 mm) steel grinding ball (2150) into each well of a standard 96-well titer plate, including 2200 and 2210 titer plates. 2110M 24-Pin Magnet: 24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm)…
-
Planetary Ball Mill
RetschProduces constant high speed for high final fineness Grinding jars from 12 to 500 mL Reproducible results Multi-language GUI The PM 100 planetary ball mill is a benchtop unit designed to pulverize soft, fibrous and brittle materials. The mill develops extremely high…
-
Gear-Drive 4-Liter Planetary Ball Mills
Across InternationalPQ-N4 series planetary ball mills may be used for mixing, homogenizing, fine grinding, mechanical alloying, cell disruption, small volume high-tech material production and even colloidal grinding. They are the ideal wet/dry milling tools for acquiring research samples with high efficiency and…
-
Gear-Drive 2-Liter Planetary Ball Mills
Across InternationalPQ-N2 series planetary ball mills may be used for mixing, homogenizing, fine grinding, mechanical alloying, cell disruption, small volume high-tech material production and even colloidal grinding. They are the ideal wet/dry milling tools for acquiring research samples with high efficiency and…
-
Desktop High Energy Vibratory Ball Mills
Across InternationalVQ-N ball mills may be referred to as shaker mills, mixer mills or high-energy ball mills. They can be used for both wet and dry grinding as well as to mix a variety of solids, suspended liquids and pastes. This unit is ideal for preparing small batches of your sample efficiently. Features…