Mills

Compare Tool

Select up to 3 products

1 - 32 of 67
Sort
View
Show
  • Wiley® Mini-Mill Replacement Parts

    Thomas®

  • Pellet Die Sets and Accessories

    SPEX SamplePrep

    13 mm Die Set: Used to form KBr disks for IR analysis. Set includes evacuable die body, base, plunger, two 13 mm polished steel pellets, O-ring vacuum seals, and knock-out ring for sample disk extraction. Load limit 10 tons (9.1 metric tons); weight 2.2 lbs (1 kg). 40 mm Die Set: To form 40…

  • Gear-Drive 0.4-Liter Planetary Ball Mills

    Across International

    PQ-N04 series planetary ball mills may be used for mixing, homogenizing, fine grinding, mechanical alloying, cell disruption, small volume high-tech material production and even colloidal grinding. They are the ideal wet/dry milling tools for acquiring research samples with high efficiency…

  • Cyclone Mill Twister

    Retsch

    ideal for grinding feeds, grains, forage and other similar products 3 controlled speeds cyclone separator with 250 ml collecting bottle for quick extraction of sample no cross contamination thanks to easy cleaning convenient operating panel professional industrial design with long lifetime …

  • Unitized Jar Mills

    US Stoneware

    Space saving, sturdy and easy to operate Jars stay centered, will not work off rolls No clamping or fastening of jar required Three-position adjustment securely mounts idler roll Rolls are Neoprene, 2” in diameter Single-Tier, Single-Jar Mill Adjustable speed…

  • 2010 Geno/Grinder®

    SPEX SamplePrep

  • Gear-Drive 2-Liter Planetary Ball Mills

    Across International

    PQ-N2 series planetary ball mills may be used for mixing, homogenizing, fine grinding, mechanical alloying, cell disruption, small volume high-tech material production and even colloidal grinding. They are the ideal wet/dry milling tools for acquiring research samples with high efficiency and…

  • 8000D Mixer/Mill®

    SPEX SamplePrep

    High-energy ball mill with dual clamps that accommodates sample sizes ranging from 0.2 - 10 grams. Ideal for grinding dry, brittle samples, mechanical alloying, slurry grinding, blending powders, and mixing emulsions. Typical samples include rocks, minerals, sand, cement, slag, ceramics, catalyst…

  • Vials and Vial Sets for the 2000 Geno/Grinder®

    SPEX SamplePrep

    Vial sets are an alternative to titer plates. These vial sets are pre-cleaned with grinding balls included. They come in sturdy carriers that have about the same footprint and height as deep-well titer plates, and fit the Geno/Grinder Clamp. Vials can be filled and sealed individually, and the…

  • Mixer Mill MM 200

    Retsch

    The mixer mill MM 200 is a compact versatile benchtop unit, which has been developed specially for dry grinding of small amounts of sample. It can mix and homogenize powders in only a few seconds. It is also perfectly suitable for the disruption of biological cells as well as for DNA/RNA…

  • Gear-Drive 12-Liter Planetary Ball Mills

    Across International

    PQ-N12 series planetary ball mills may be used for mixing, homogenizing, fine grinding, mechanical alloying, cell disruption, small volume high-tech material production and even colloidal grinding. They are the ideal wet/dry milling tools for acquiring research samples with high efficiency…

  • Desktop High Energy Vibratory Ball Mills

    Across International

    VQ-N ball mills may be referred to as shaker mills, mixer mills or high-energy ball mills. They can be used for both wet and dry grinding as well as to mix a variety of solids, suspended liquids and pastes. This unit is ideal for preparing small batches of your sample efficiently. Features…

  • M 20 Universal Mill

    IKA Works

    Thomas No. 1203C57 Batch mill suitable for dry grinding of hard and brittle substances. Double-walled grinding chamber can be cooled with water through two hose adapters Removable grinding chamber, easy to clean Two grinding chambers can be alternately operated using one drive M 21 blade…

  • Gear-Drive 20-Liter Planetary Ball Mills

    Across International

    PQ-N20 series planetary ball mills may be used for mixing, homogenizing, fine grinding, mechanical alloying, cell disruption, small volume high-tech material production and even colloidal grinding. They are the ideal wet/dry milling tools for acquiring research samples with high efficiency…

  • 8000D Mixer/Mill® Accessories

    SPEX SamplePrep

    Multiple Sample Adapter for Seven 1/2 Inch Vials: Holds seven vials, each 1/2 in. (12.7 mm) in diameter, for simultaneous running in 8000M Mixer/Mill®. Suitable vials include SPEX SamplePrep 3111, 3114, 3116 and 3117. Vials run at one time should be same length. Can be used in 8000D…

  • Mixer Mill MM200 Accessories

    Retsch

    Accessories for use with the MM200 Mixer Mill

  • Natural Brazilian Agate Grinding Balls

    Across International

    Natural Brazilian agate stone grinding balls for planetary and high energy ball mills.

  • Tungsten Carbide-Lined Vial Set

    SPEX CertiPrep

    Tungsten Carbide-Lined Vial Set, 3/4 x 2in: 3/4 in. (19.1 mm) diameter x 21/8 in. (54 mm) long. Includes two slip-on Delrin® caps with tungsten carbide inserts, six disposable methacrylate center cylinders, and two 5/16 in. (7.9 mm) tungsten carbide balls. Volume 5 mL; grinding load…

  • Mid-Size Polycarbonate Center Cylinders for 6881, 6883, and 6885

    SPEX SamplePrep

    For 6881, 6883, and 6885 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. NOTE: These products are only available for sale to Domestic U.S. Customers.

  • Gear-Drive 4-Liter Planetary Ball Mills

    Across International

    PQ-N4 series planetary ball mills may be used for mixing, homogenizing, fine grinding, mechanical alloying, cell disruption, small volume high-tech material production and even colloidal grinding. They are the ideal wet/dry milling tools for acquiring research samples with high efficiency and…

  • Thomas Model 4 Wiley® Mill

    Thomas®

    NEW & Improved! The Thomas Model 4 Wiley® Mill is ideal for the sample preparation of solid biofuels according to EN 14780. Official Methods of Analysis AOAC 922 Moving parts are totally enclosed 7 3/4” diameter milling chamber - 141 cu. in. 2 1/4” diameter…

  • 8530 Enclosed Shatterbox®

    SPEX SamplePrep

    For 230 V/50 Hz operation CE Approved LCD display with environmentally safe, push-button membrane switch. Soundproof enclosure reduces noise levels. Equipped with a safety interlock system and lockable casters. Wide choice of grinding containers, sold separately. Features a cam-activated clamp that…

  • Acessory set for the Wig-L-Bug mixing/grinding mill, for stock# 44204 and 44604

    Alfa Aesar

    Harmonized Tariff Code:  9027.90

  • Racks, Clamps and Holders for the 2000 Geno/Grinder

    SPEX SamplePrep

    2190 Vial Rack : Holds 24 3116PC vials, 24 2241-PC vials, or 24 2241-PE vials. All three vials hold a single 3/8 in. (9.5 mm) steel grinding ball 2195 Large Capacity Clamp Assembly : An oversize clamp that will hold centrifuge tubes or a double load of titer plates. Designed to hold twelve…

  • Wiley® Mill 4 1/2 Horse Power Unit Accessories

    Thomas®

  • Accessories for 6801 Vial Set

    SPEX SamplePrep

    Large Stainless Steel Center Cylinder for 6801: For 6801 Vial Set. Used in place of 6801C when polycarbonate cylinder is not compatible with sample. Made of nonmagnetic stainless steel. Extractor/Vial Opener for Large and Mid-Size Grinding Vials: The Extractor/Vial Opener lifts vial sets in…

  • Large Grinding Vial Set

    SPEX SamplePrep

    Large Grinding Vial Set: Set includes stainless steel impactor and two end plugs, plus four polycarbonate center cylinders (6801C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity up to 50 mL. Vial Rack…

  • Ball and Vial Sets

    SPEX SamplePrep

    Polystyrene Vial w/Slip-On Cap, 0.5 x 1 inch: 1/2 in. (12.7 mm) diameter x 1 in. (25.4 mm) long. Includes slip-on polyethylene cap. Volume 2.5 mL; mixing load approximately 1 mL. Accepts SPEX SamplePrep 3112 or 3119 methacrylate balls. Methacrylate Balls, 3/8 inch: Methacrylate Balls 3/8…

  • 6775 Freezer/Mill®

    SPEX SamplePrep

    The 6775 Freezer/Mill® is a small cryogenic mill that processes samples ranging from 0.1 - 5 grams. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. The new high resolution display is user-friendly and…

  • Small Grinding Vials Accessories

    SPEX SamplePrep

    Extractor/Vial Opener for Small Grinding Vials: The Extractor/Vial Opener lifts 6700-series vials in and out of the Freezer/Mill, and is used to remove the vial end plugs from the center section. One 6754 is supplied with each 6770 Freezer/Mill and as part of the 6870S Accessory Package. …

  • Accessory Packages for the 6870 SPEX SamplePrep Freezer/Mill®

    SPEX SamplePrep

    Each 6870 Freezer/Mill® is supplied with your choice of 6870L Large Vial Accessory Package or 6870S Small Vial Accessory Package. The 6870 Freezer/Mill® can hold up to four small vials* (6751, 6761, 6771) or one mid-size vial (6881, 6883, 6885) The Accessory Package for mid-size vials must…

  • Large Polycarbonate Center Cylinders for 6801 and 6871

    SPEX SamplePrep

    For 6801 and 6871 Vial Sets. Polycarbonate is durable but should be cleaned with detergent and water, not organic solvents. Sold in units of 4. NOTE: These products are only available for sale to Domestic U.S. Customers.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.