Meters

Compare Tool

Select up to 3 products

1 - 32 of 84
Sort
View
Show
  • The YSI ProDSS (digital sampling system) is a portable water quality multiparameter instrument for the measurement of several critical parameters - dissolved oxygen (optical), turbidity, pH, ORP, conductivity, specific conductance, salinity, TDS, resistivity, TSS, ammonium, ammonia, chloride,…

  • The YSI MultiLab line includes the 4010-1W (single channel), 4010-2W (dual channel) and 4010-3W (three channel) instruments providing easy to use and calibrate menu-driven operation ideal for the laboratory. All MultiLab instruments can accurately measure pH, ORP, conductivity, and DO/BOD.…

  • An evolution of the Professional Series water quality meters, the ProSolo DIGITAL handheld replaces the ProODO as YSI’s most advanced optical dissolved oxygen field meter. Paired with the latest optical DO and temperature (ODO/T) probe, the ProSolo benefits from years of expertise in…

  • Includes bottle of NaCl electrolyte, 1 sanding disc, and 6 screw-on cap membranes. 1.25 Mil PE, Polyethylene membranes. Yellow cap. Response Time (T95 - from 0 to 100%) = 8 seconds Flow Dependence After 4 Minutes = 25% Required Flow Rate = 6 inches/ second

  • The ProOBOD® self-stirring optical BOD probes are designed to fit into standard 300 mL BOD bottles with an international version also available for use with other tapers. EPA approved for wastewater compliance reporting of BOD and CBOD. The ProOBOD is designed for use with the YSI ProODO…

  • Accessory for the YSI 550A Dissolved Oxygen Instrument, theYSI 650 MDS (Multiparameter Display System) and the YSI 556 MPS (Multiprobe System). Form-fitted carrying case with a shoulder strap Clear and black vinyl

  • The EcoSense ODO200M is an optical-based dissolved oxygen meter ideal for DO sampling. Sensors are EPA approved for wastewater compliance reporting of DO. Compared to the EcoSense® ODO200, the ODO200M features extended memory and simple data transfer with a micro-USB port. Features of the…

  • Calibrate your equipment for maximum accuracy Reagent-grade secondary standards Traceable to NIST standards 1,000, 10,000, 50,000 and 100,000 µmhos/cm Each bottle includes detailed instructions and a table of corrections at temperatures between 20 and 30°C. Packaged…

  • Measure pH, mV (ORP) and temperature accurately in the laboratory with the YSI pH 1110. This benchtop instrument for basic, routine measurements in the lab is an accurate and easy-to-use solution for repeatable pH or mV measurements. Features: Single channel measurement of pH or mV…

  • The pH/EC1030A is designed for quick, accurate results in an economical platform. The pH/EC1030A is the perfect instrument for spot sampling of pH, conductivity, total dissolved solids (TDS), salinity and temperature in applications such as wastewater, surface water, aquaculture, hydroponics,…

  • The Quatro is a 4-port cable for use with the Professional Plus instrument. The Quatro is a true field cable with MS (military spec) connectors, two year warranty, and rugged, weighted probe guard. Create a powerful multiparameter sampling instrument. Measure conductivity/temperature,…

  • The EcoSense ® pH10A pen-style instrument provides an ultimate feature set over similar competitive models. The pH10A features an easy-to-use graphic interface, simple one-hand operation, memory, and low cost of ownership over the life of the product. The easy, user-replaceable electrode…

  • Heavy duty probe guard houses the DO and temperature sensors Weighted and waterproof; sinks easily Uses cap membranes for easy replacement. Cable is connected directly to probe body. Compatible with Model 52, 7230D50 and Model 58, 7230R25. Includes six cap membranes and KCl solution. For…

  • The EcoSense ® EC30A pen-style instrument provides an ultimate feature set over similar competitive models. The EC30A features an easy-to-use interface, simple one-hand operation and low cost of ownership over the life of the product. The easy, user-replaceable electrode ensures the…

  • Connects directly to the YSI 3100 and 3200 Calibrated to OIML recommendations 56 and 68 Cells allow automatic temperature compensation without the need of another probe. For use with 8 pin DIN connector. 3240M01 is of ABS plastic; all others are PYREX® 7740.

  • Never worry about the accuracy of your pH, ORP, or conductivity data again! Ensure probe performance with the 5580 Confidence Solution®. This is not a calibration solution but it is a simple probe verification check. Simply immerse your multiparameter probes in the solution and verify the…

  • Measure pH, mV (ORP) and temperature accurately in the laboratory with the YSI pH 1310 or 1310P with built-in printer. The TruLab pH 1310 benchtop meter is the ideal laboratory instrument for reliable pH/mV measurements with automatic documentation for GLP compliance. The 1310 benchtop is an…

  • Model 5739 (7230R35) Screw-apart construction lets you quickly change from one cable length to another Ability to replace either probe or cable without replacing the entire assembly Pressure compensation, temperature compensation, built-in weight, long-life, polarographic…

  • The 60520 dissolved oxygen cables ONLY work with the YSI Pro Plus and Pro20 instruments. Cables can be ordered in lengths of 1-, 4-, 10-, 20-, and 30-meters. Special orders up to 100-meters in 10-meter increments can also be placed. Cables over 1-meter come with the 603062 cable management…

  • The 200-BOD is a self-stirring BOD probe designed to fit into standard 300 mL BOD bottles and used with the DO200 handheld DO instrument. Uses wall power - power supply included Modular design allows for serviceability Uses convenient screw-on PE cap membranes for the fastest repsonse times

  • Easy user-replaceable sensor allows for quick sensor replacements, if needed. No tools necessary. One-year sensor warranty. Uses convenient screw-on cap membranes making membrane changes simple and easy. Use with the Pro20, Pro20i, Pro1020, Pro2030, and Pro Plus instruments. Cables…

  • Easy user-replaceble sensor allows for quick sensor replacements if needed.  Quickly switch DO sensors without having to send in the instrument for repair or replacing the entire cable assembly.  Uses convenient screw-on cap membranes making membrane changes simple and easy Use…

  • ORP Probe for Professional Plus Handheld Multiparameter Meters. For lab-grade and field applications Easy user-replaceble sensor allows for quick sensor replacements if needed Measure ORP (oxidation reduction potential), or redox, quickly and easily with the 1002 sensor

  • The YSI ProDSS ODO/CT probe is the first expansion of the ProDSS system. The ODO/CT probe and cable assembly features integral (i.e. built-in) optical dissolved oxygen, conductivity, and temperature sensors and is available in lengths up to 100 meters. It’s perfect for measuring DO in the…

  • BOD Analyst Program for WINDOWS Conforms to Standard Methods Saves time and reduces errors Automates BOD calculations Insures data integrity Eliminates need for initial measurements of each sample dilution and derives theDO values based on the measurement of only…

  • Easy to use, rugged and reliable, the YSI Pro10 provides everything you need in a handheld instrument for the measurement of temperature and either pH or ORP. User replaceable sensors and cables, 50 data set memory, and convenient calibration routine makes it user friendly. A true field instrument;…

  • Pro20i Parameters Dissolved Oxygen (DO%, DO Local, mg/L, ppm) Temperature (°C, °F) Barometric Pressure (mmHg, inHg, mbar, psi, kPa) The YSI Pro20i provides everything you need in a handheld dissolved oxygen meter. Ruggedness, simplicity and reliability are the…

  • The Pro DIGITAL ODO/T probe and cable assembly features integral optical dissolved oxygen and temperature sensors. Cable lengths are available up to 100 meters. The ODO/T probe assembly pairs with the ProSolo Handheld to form a complete sampling system. Please visit the ProSolo ODO/T Kits …

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.