Meters

Compare Tool

Select up to 3 products

1 - 32 of 61
Sort
View
Show
  • pH/CON 700 Benchtop Meter

    Oakton

    Easily toggle between pH, mV, conductivity, TDS, and temperature measurements at the touch of a button Space-saving design takes up less room on the bench than other meters Large display lets you see your measurements from across the lab Conductivity and TDS autoranging chooses the best…

  • Benchtop pH 2700 pH/mV/Temperature Meter and Accessories

    Oakton

    Great general-purpose meter for laboratories where GLP data-management is required Large display with bright backlight Dynamic reading stability indication indicates when your measurement is stable Up to 500-point memory with date-time stamp for GLP Password protection for both setup…

  • pH 5+ Meter

    Oakton

    High ±0.01 pH accuracy at economical prices Reads pH and temperature Automatic Temperature Compensation (ATC) All push button operation Three-point pH calibration Auto buffer recognition Hold function; Auto-off Use with most pH electrodes with BNC connectors …

  • pH 6+ Meters

    Oakton

    Achieve professional results at an economical price! The microprocessor-based pH 6+ meter gives you high accuracy and reliability. Use this meter to take pH, mV and temperature measurements. The millivolt readout lets you take ORP readings. Meter includes a protective rubber boot that also acts as…

  • ION 700 Benchtop Meters

    Oakton

    Large display allows you to see measurement values at a glance Custom 3-1/4" x 2-7/16" LCD display Small size conserves valuable benchspace Store and recall up to 100 data sets Ion 700 meter measures pH, mV, relative mV, and temperature while adding ion measurement…

  • PCD 650 pH/Conductivity/Dissolved Oxygen Meters

    Oakton

    All three parameters, plus temperature, measured and displayed simultaneously! These top-of the-line waterproof meters offer features that are typically found on much more expensive models. The IP67-rated housing allows use in dirty and wet environments without harm to the meter. Datalog up…

  • Probes for DO 6, DO 6+, and DO 700 Meters

    Oakton

    Oakton® probes use galvanic technology to provide rapid results, without any warm-up requirements for field use or economical polarographic technology for BOD use. Includes 50mL of electrolyte solution and one replacement membrane cap. Probe dimensions: 5"L x 0.5" dia (11.5 cm L…

  • EcoTestr™ pH1 Waterproof Pocket Testers

    Oakton

    Automatically recognizes pH buffer standards Large LCD dual-line display shows pH and temperature readings simultaneously Rugged IP67-rated housing is waterproof, dustproof, and floats in water Leakproof cap with fill line functions as a sample/calibration and hydrating cup …

  • Waterproof CON 150 Meter

    Oakton

    Rugged, accurate, reliable--best value for an IP67-rated waterproof meter Intuitive, user-friendly icons—probe status displays cell constant Grip-Clip holder quickly and easily secures the probe to your beaker or container Expanded data logging for up to 150 data sets 700 hours…

  • Waterproof pH 600 Series Meters

    Oakton

    Expanded range, resolution and accuracy, increased memory, and advanced communications These waterproof handheld meters feature a –2.00 to 19.99 pH range expandable to 0.001 pH resolution. Combined with accuracies up to ±0.002 pH, these meters provide a new benchmark in our pH…

  • CON 2700 Benchtop Meter

    Oakton

    Measure conductivity, total dissolved solids (TDS), salinity, resistivity, and temperature Brilliant backlit display with dynamic stability indication Up to 500 point memory with date-time stamp for GLP Output data to printer or PC Accepts either 2-cell or 4-cell electrodes Features…

  • Conductivity/TDS Temperature Probes

    Oakton

  • Calibration Kit

    Oakton

    Kit includes eight pH buffer calibration pouches (two each of pH 4.01; 7.00; 10.00; and rinse water), sample jar, instructions and carrying case. *Order waterproof pHTestr BNC separately.

  • Waterproof pH/ORP Testers

    Oakton

    Monitor ORP or pH Large screen display Self-diagnostic messaging Non-volatile memory Two waterproof units are available for monitoring ORP or pH, respectively. The ORPTestr® 10 features a large platinum band on the sensor to provide quick, stable, repeatable response…

  • 10 µS Singles

    Oakton

    OAKTON Conductivity “Singles” pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration Pouches are labeled with equivalent values for ppm in KCl, NaCl and 442 and…

  • PCTSTestr™ 5 Waterproof Pocket Testers

    Oakton

    Save money by replacing sensor, not tester! Conductivity, pH, salinity, and TDS all in one meter 3-point calibration with automatic recognition of standards Large easy-to-read LCD features two-color backlight Rugged IP67-rated housing is waterproof, dustproof, and floats in water…

  • PC 650 pH/Conductivity Meters

    Oakton

    Two most common electrochemistry measurements in one convenient meter! Durable waterproof and dustproof design with IP67 rating – Even with no probes attached Push-button pH calibration at up to six points – Up to 15 buffer options with autobuffer recognition of USA, NIST,…

  • Dissolved Oxygen Meter Accessory Kit

    Oakton

    For DO 110, DO 300, and DO 600 meters Bring everything you need for accurate DO measurement with you when you work in the field. Includes 50 mL of electrolyte solution, two replacement membrane caps, rinse bottles, and hard carrying case with space for your meter and probe. (Meter not included).

  • pH/Con 10 Series Down Well Probe 10 ft.

    Oakton

    This multi-sensor probe was designed with a slim design for use testing ground water. Probes measure only 1.7" in diameter and easily fit into 2" well heads. Includes: 10 ft submersible cable

  • Waterproof CON 600 Series Conductivity Meters

    Oakton

    Waterproof and dustproof with IP67 rating and it floats! This microprocessor-based CON 600 Conductivity meter features a superior waterproof housing that floats! It’s perfect for conditions that ruin ordinary meters. The CON 600 reads conductivity from 0 to 199.9 mS with…

  • Waterproof CON 450 Meter

    Oakton

    Backlit, rugged waterproof meter is ideal for any environment Intuitive,user-friendly icons - electrode status displays cell constant Grip-Clip holder quickly and easily secures probe to beaker/container USB and RS-232 output for up to 500 data sets 500 hours battery life or…

  • Probe Maintenance for DO 6, DO 6+, and DO 700 Meters

    Oakton

    Replacement membrane assembly consists of a preassembled membrane and cap. Simply screw replacement membrane assembly onto the probe you already have. Includes 50 mL of electrolyte solution.

  • Replacement sensor for WP pHTestr 3, 3+, 10, 20, and 30

    Oakton

  • EcoTestr™ pH 2+ Pocket pH Meter

    Oakton

    Upgrades to design and function won't break the bank Expanded 4-digit dual-line display shows pH and temperature readings simultaneously Additional key provides an easier, more intuitive interface Improved cap functions as a sample cup and as a stabilizing base to stand the meter…

  • Accessories for Conductivity/Temperature Meter

    Oakton

    Note: These items are accessories for the Conductivity/Temperature Meter from Oakton and not the meter. The picture is used to identify the meter in which these accessories can be used and not meant to be a representation of any item listed below.

  • pH Tutor Benchtop Meter with Electrode

    Oakton

    Simple push-button keypad allows access to a variety of features, including HOLD, ATC, and electrode diagnostics. The quick reference card, located beneath the meter, slides out for easy reference and keeps procedures handy at all times. Easy-to-use meter doesn’t sacrifice technology…

  • Deluxe pH Meter Kit

    Oakton

    Calibration kit includes pH buffer pouches (five each of 4.01, 7.00, 10.00, and rinse water), squeeze bottle, and hard carrying case. (Meter not included)

  • Waterproof pH/CON 450 Meter

    Oakton

    Select meter with combination pH/CON probe or separate pH and conductivity probes Intuitive, user-friendly icons—electrode status displays pH slope Grip-Clip electrode holder quickly and easily secures electrode to side of beaker or container USB or RS-232 output for up to 500…

  • ORPTestr® 5 Waterproof Pocket Testers

    Oakton

    Save money by replacing sensor, not the tester Large easy-to-read LCD features three-color backlight Simple to calibrate with automatic standard recognition Rugged IP67-rated housing is waterproof, dustproof, and floats in water with sensor cap on Leakproof cap with fill line…

  • Waterproof Multi-Parameter Testers

    Oakton

    PCSTestr™ 35, PCTestr™ 35 and PTTestr™ 35 Mutiple measurements in one instrument Displays measured value along with temperature — simply press a key to toggle between pH, conductivity, TDS, and salinity where applicable Waterproof, dustproof housings float …

  • ORPTestr BNC

    Oakton

    Large, two-line display Waterproof, dustproof housing floats! Double junction electrode is ideal for dirty water, heavy metals, sulfides and organics Replaceable sensor lets you reuse same meter body, saving you money Push-button ±150 mV offset adjustment …

  • EcoTestr™ Waterproof Pocket Testers

    Oakton

    Designed to be durable and easy to use View measurements clearly on large LCD Rugged IP67-rated housing is waterproof, dustproof, and floats in water Leakproof cap with fill line functions as a sample/calibration and hydrating cup Secure—attach a lanyard to prevent losing…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.