Conductivity

Compare Tool

Select up to 3 products

1 - 32 of 99
Sort
View
Show
  • Thomas Traceable Conductivity Calibration Standards

    Thomas®

    Sixteen ounces of liquid for frequent calibration needs Highest accuracy available Units labeled (micromhos/millisiemens, ohms, parts per million/TDS) Includes step-by-step calibration instructions and temperature chart 100% compatible with all makes of equipment …

  • Conductivity Calibration Solutions

    YSI

    Calibrate your equipment for maximum accuracy Reagent-grade secondary standards Traceable to NIST standards 1,000, 10,000, 50,000 and 100,000 µmhos/cm Each bottle includes detailed instructions and a table of corrections at temperatures between 20 and 30°C. Packaged…

  • Singles Calibration Pouches

    Oakton

    Individual conductivity/TDS calibration solution pouches NIST traceable materials for high accuracy Contains right amount of solution for calibration No containers to clean or carry Pouches are ideal for on-site calibration and verification in the field. Pouches are airtight for maximum…

  • Star A215 pH/Conductivity Benchtop Multiparameter Meter

    Thermo Scientific Orion

    The Thermo Scientific Orion Star A215 pH/ Conductivity Benchtop Meter is the ideal choice for any lab. Get the information you need quickly and easily from the large, backlit graphic LCD display. Informative display shows individual pH/mV/RmV or conductivity/TDS/salinity/ resistivity results…

  • Thomas One-Shot Traceable Conductivity Standards

    Thomas®

    Traceable to NIST standards Accuracy: ±0.25% 100% compatible with all makes of equipment For use in the lab and the field Single-use standards eliminate concerns about external container contamination. Each container is labeled for calibrating conductivity…

  • Star A325 pH/Conductivity Portable Multiparameter Meter

    Thermo Scientific Orion

    The Thermo Scientific Orion Star A325 pH/ Conductivity Portable Meter is the top choice for advanced measurements on location. Get the information you need quickly and easily from the large, backlit graphic LCD display. Informative display shows individual pH/mV/RmV or…

  • 4-Electrode Conductivity Cells

    Thermo Scientific Orion

    DuraProbe cells are designed for the highest accuracy under demanding field and plant conditions. This design compensates for electrode fouling, cable and connector resistance, and polarization errors. A choice of glass/platinum, epoxy/graphite, or stainless steel ensure compatibility with most…

  • Conductivity/pH Ultrameter

    Myron L

    pH/ORP Sensor protective cap Memory for 20 readings Display prompts for simple pH calibration Temperature compensation This meter has a reading accuracy of ±1%, which has been achieved through advanced four-electrode conductivity cell technology, a unique pH/ORP sensor…

  • Bench-Top Cond/TDS/Salinity Meter

    Sper Scientific

    Rugged housing with large LCD displaying the parameter being measured together with time, date and temperature (in ºC or ºF). Automatic or manual temperature compensation Automatic or manual ranging Automatic buffer recognition Digital and analog outputs Min/Max and 99 data points …

  • inoLab® 7110 Conductivity Meters

    WTW

    inoLab Cond 7110: Easy-to-operate basic conductivity benchtop meter for routine measurement. For AC and battery operation. Meter with universal power supply, stand and operation manual. inoLab Cond 7110 SET 1: Easy-to-operate basic conductivity benchtop meter for routine measurement. For AC…

  • 4510 and 4520 Bench Conductivity Meters

    Jenway (Bibby Scientific US)

    Thomas Nos. 1200Q29 and 1200Q30 Simultaneous display of conductivity or TDS and temperature Automatic selection of range for best resolution Calibration by cell constant or standard solutions Automatic standard recognition Storage of up to 32 results Bi-directional RS232 link to…

  • 2-Electrode Conductivity Cells

    Thermo Scientific Orion

    The two electrode cells are able to measure low, standard and high conductivity samples depending on the cell constant. Cells with a 0.1cm -1 cell constant are ideal for low ionic strength solutions, deionized water, and ultra pure water. Glass/platinum cells are the best for chemically reactive…

  • Accessories for YSI MultiLab Line

    YSI

    Thomas No. 1203K02 Used with MultiLab product line Thomas No. 1203K03 Used with MultiLab product line Thomas No. 1203K04 Used with MultiLab product line Thomas No. 1203K05 YSI ProOBOD can be used with the MultiLab benchtop instrument for your BOD measurements.…

  • HQ14D Portable Conductivity & TDS Meter

    Hach

    Designed for your Conductivity and TDS applications, the Hach HQ14D portable Conductivity and TDS meter is an advanced handheld digital meter that takes the guesswork out of measurements. The Hach HQD digital Conductivity/TDS meter combines reliability, flexibility and ease of use. The HQD portable…

  • VERSA STAR™ Conductivity Benchtop Meters

    Thermo Scientific Orion

    This versatile meter has a large,color graphic LCD display. Theinformative display shows readings,connections, time, date, sample ID,user ID and calibration information. Select from five modules tocustomize the four channels as you need it - it's versatile for you toconfigure how you…

  • CON 700 Benchtop Meter

    Oakton

    An affordable way to take consistent, accurate conductivity measurements in your laboratory Compact size frees up bench space Large brightly lit display allows for easy reading of measured values Easily toggle between conductivity and TDS at the touch of a button! CON 700…

  • Bench-Top Water Quality Meter

    Sper Scientific

    The Water Quality Bench Top Meter from Sper Scientific measure all of the following parameters: pH ORP (oxygen reduction potential - SOLD SEPARATELY) mV Conductivity TDS (total dissolved solids) Salinity Temperature Rugged housing with large LCD displaying the…

  • Conductivity / TDS Meter

    Thomas®

    Traceable® Pens for Conductivity, Dissolved Solids, and Salinity provides for conductivity, conductivity/total dissolved solids and salinity. Meters fulfill requirements for CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, ISO and Federal/State regulations. Waterproof…

  • Conductivity Solutions

    LaMotte

    Potassium chloride solutions TDS values are based on a 0.7 conversion from conductivity. Solutions can be used to standardize conductivity meters.

  • Orion Star A222 Conductivity Portable Meter

    Thermo Scientific Orion

    Get the readings that you need where you need them with the Thermo Scientific Orion Star A222 Conductivity Portable Meter. The large, backlit graphic LCD display shows conductivity/ TDS/salinity/resistivity and temperature along with electrode status, time, date and calibration points. …

  • SensION 7 Benchtop Conductivity Meter

    Hach

    For accurate conductivity analysis of water quality in the lab Slip-resistant keypad Quick single-point calibration Ultra-fast response Tme and date stamps All-in-one 5-pin connector Carries the European CE mark Meter determines conductivity, plus TDS, salinity…

  • FiveEasy™ Conductivity Meters

    Mettler Toledo

    The well-priced pH/mV and conductivity FiveEasy and FiveEasy Plus benchtop meters are the perfect choice for a wide range of laboratory applications. Time is an ever more valuable asset. Thanks to the Five's intuitive operation, sleek design and simple data export functions, you can…

  • Conductivity Calibration Kit Mini-Din

    Thermo Scientific Orion

    The conductivity calibration resistor kit for Star Series conductivity meters, 8 pin MiniDIN connection, contains six resistors that simulate standard conductance values on a meter. The resistors may be used to verify proper meter function by comparing the meter reading to the conductance of the…

  • Pro2030 Dissolved Oxygen, Conductivity, Salinity Instrument

    YSI

    The Pro2030 provides everything you need in a handheld dissolved oxygen meter that automatically compensates for changes in salinity values. Rugged, simple and reliable. Measure DO, salinity, conductivity, specific conductance, TDS, barometric pressure and temperature. EPA approved for…

  • Calibration and Test Material for Conductivity Measurements

    WTW

    Test resistors and calibration solutions to test the meters with conductivity function as well as to calibrate the system from the device and conductivity measuring cell Optimal measuring safety by PTB/NIST traceable standard solutions Easy device check by highly precise test resistors …

  • Conductivity Meter

    Thomas®

    Traceable® Pens for Conductivity, Dissolved Solids, and Salinity provides for conductivity, conductivity/total dissolved solids and salinity. Meters fulfill requirements for CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, ISO and Federal/State regulations. Waterproof…

  • Conductivity Starter Pen Meters

    Ohaus

    Accurate Electrochemistry Measurement At Your Fingertips After more than a century of perfecting the art of measurement through our durable weighing products, OHAUS precision is now available in a line of pen meters that provide accurate measurement of pH, oxidation-reduction potential (ORP),…

  • Datalogging Conductivity / TDS Meter

    Sper Scientific

    Automatically records up to 16,000 data points in the field along with time and date. These can later be downloaded to a computer via the meter’s USB port and the results viewed instantly on software which comes with the unit. The software also enables real time data logging directly from the…

  • EP Series Conductivity Meters

    Myron L

    Easy-to-use, durable meters Automatic temperature compensation Built-in electrodes never need replatinization Sealed against moisture Can be used in both field and laboratory applications Meters are simple to use. First, rinse and fill the sample cup. Next, select the range. Then press the…

  • Starter Series 300C Portable Conductivity Meters

    Ohaus

    Convenient Portable Conductivity Meter for Wherever Your Work Takes You After more than a century of perfecting the art of measurement through our durable weighing products, OHAUS precision is now available in a the form of a portable conductivity meter that can also test for TDS. This…

  • ProfiLine Single-parameter Portable Conductivity Meter Series

    WTW

    The portable WTW ProfiLine meter series is available in three (3) series versions, the 3110/3205-Basic series, 3210-Professional series and 3310-Advanced series, each with a distinct level of sophistication for the independent measurement of pH, conductivity, or dissolved oxygen. All versions have…

  • Starter Series 3100C Benchtop Conductivity Meters

    Ohaus

    Smart Conductivity Bench Meter for Standard Laboratory Applications After more than a century of perfecting the art of measurement through our durable weighing products, OHAUS precision is now available in the form of a benchtop conductivity meters. Starter 3100C can test for conductivity,…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.