Conductivity Meters

Compare Tool

Select up to 3 products

HomeAll Products

Meters Conductivity Meters

1 - 32 of 92
Sort
View
Show
  • Sixteen ounces of liquid for frequent calibration needs Highest accuracy available Units labeled (micromhos/millisiemens, ohms, parts per million/TDS) Includes step-by-step calibration instructions and temperature chart 100% compatible with all makes of equipment …

  • Traceable to NIST standards Accuracy: ±0.25% 100% compatible with all makes of equipment For use in the lab and the field Single-use standards eliminate concerns about external container contamination. Each container is labeled for calibrating conductivity…

  • 4-Electrode Conductivity Cells

    Thermo Scientific Orion

    DuraProbe cells are designed for the highest accuracy under demanding field and plant conditions. This design compensates for electrode fouling, cable and connector resistance, and polarization errors. A choice of glass/platinum, epoxy/graphite, or stainless steel ensure compatibility with most…

  • Calibrate your equipment for maximum accuracy Reagent-grade secondary standards Traceable to NIST standards 1,000, 10,000, 50,000 and 100,000 µmhos/cm Each bottle includes detailed instructions and a table of corrections at temperatures between 20 and 30°C. Packaged…

  • Thomas No. 1203K02 Used with MultiLab product line Thomas No. 1203K03 Used with MultiLab product line Thomas No. 1203K04 Used with MultiLab product line Thomas No. 1203K05 YSI ProOBOD can be used with the MultiLab benchtop instrument for your BOD measurements.…

  • The Thermo Scientific Orion Star A215 pH/ Conductivity Benchtop Meter is the ideal choice for any lab. Get the information you need quickly and easily from the large, backlit graphic LCD display. Informative display shows individual pH/mV/RmV or conductivity/TDS/salinity/ resistivity results…

  • Traceable® Pens for Conductivity, Dissolved Solids, and Salinity provides for conductivity, conductivity/total dissolved solids and salinity. Meters fulfill requirements for CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, ISO and Federal/State regulations. Waterproof…

  • pH/ORP Sensor protective cap Memory for 20 readings Display prompts for simple pH calibration Temperature compensation This meter has a reading accuracy of ±1%, which has been achieved through advanced four-electrode conductivity cell technology, a unique pH/ORP sensor…

  • Rugged, accurate, reliable--best value for an IP67-rated waterproof meter Intuitive, user-friendly icons—probe status displays cell constant Grip-Clip holder quickly and easily secures the probe to your beaker or container Expanded data logging for up to 150 data sets 700 hours…

  • The Thermo Scientific Orion Star A325 pH/ Conductivity Portable Meter is the top choice for advanced measurements on location. Get the information you need quickly and easily from the large, backlit graphic LCD display. Informative display shows individual pH/mV/RmV or…

  • SD 80 TDS Meter

    Lovibond

    The SD 80 TDS Tester is ideal for field testing in environmental or industrial settings as well as for pool and spa testing! The robust housing is completely waterproof (IP67 rated!) and the intuitive scroll-bar functionality combined with a backlit display enable the easy measurement and…

  • Redi-Stor™ is the ideal solution for storing conductivity probes. It preserves probe’s cleanliness, eliminates growths found when storing in water only, and maintains the probe for immediate use with no conditioning.

  • Provides accurate results on demand Four programmable custom calibration points Automatic and manual temperature compensation Automatically changes ranges Meter measures micromhos (microsiemens), megohms, dissolved solids, condentration and salinity with recorder output. K…

  • Autoranging Adjustable temperature control Powerful microprocessor-based surface-mount circuitry Memory for 20 readings Data back up system Low battery indicator Fast and accurate, the Ultrameter delivers performance of ±1% of reading. Factory calibrated with…

  • Potassium chloride solutions TDS values are based on a 0.7 conversion from conductivity. Solutions can be used to standardize conductivity meters.

  • Designed for your Conductivity and TDS applications, the Hach HQ14D portable Conductivity and TDS meter is an advanced handheld digital meter that takes the guesswork out of measurements. The Hach HQD digital Conductivity/TDS meter combines reliability, flexibility and ease of use. The HQD portable…

  • For accurate conductivity analysis of water quality in the lab Slip-resistant keypad Quick single-point calibration Ultra-fast response Tme and date stamps All-in-one 5-pin connector Carries the European CE mark Meter determines conductivity, plus TDS, salinity…

  • Cell constant = 1.0 Cell is epoxy/platinum with built-in temperature sensor. Dimensions: 5" L x 0.5" Dia. with a 2.5 ft. cable. For use with Thomas numbers 3239M88, M91 and M94 meters.

  • inoLab Cond 7110: Easy-to-operate basic conductivity benchtop meter for routine measurement. For AC and battery operation. Meter with universal power supply, stand and operation manual. inoLab Cond 7110 SET 1: Easy-to-operate basic conductivity benchtop meter for routine measurement. For AC…

  • OAKTON Conductivity “Singles” pouches are convenient, air-tight pouches with high-precision calibration standards. Ideal for field use-take them to your test site for on-the-spot calibration Pouches are labeled with equivalent values for ppm in KCl, NaCl and 442 and…

  • Easy-to-use, durable meters Automatic temperature compensation Built-in electrodes never need replatinization Sealed against moisture Can be used in both field and laboratory applications Meters are simple to use. First, rinse and fill the sample cup. Next, select the range. Then press the…

  • The Water Quality Bench Top Meter from Sper Scientific measure all of the following parameters: pH ORP (oxygen reduction potential - SOLD SEPARATELY) mV Conductivity TDS (total dissolved solids) Salinity Temperature Rugged housing with large LCD displaying the…

  • Individual conductivity/TDS calibration solution pouches NIST traceable materials for high accuracy Contains right amount of solution for calibration No containers to clean or carry Pouches are ideal for on-site calibration and verification in the field. Pouches are airtight…

  • For accurate conductivity analysis of water quality Slip-resistant keypad Quick single-point calibration Measures/compensates temperature in °C or °F Waterproof (IP67) and buoyant Carries the European CE mark Meter features a large, easy-to-read, digital LCD…

  • The Thermo Scientific Orion Star A322 Conductivity Portable Meter is the top choice for advanced measurements on location. Get the information you need quickly and easily from the large, backlit graphic LCD display. Informative display shows conductivity/TDS/ salinity resistivity and temperature…

  • The Pro2030 provides everything you need in a handheld dissolved oxygen meter that automatically compensates for changes in salinity values. Rugged, simple and reliable. Measure DO, salinity, conductivity, specific conductance, TDS, barometric pressure and temperature. EPA approved for…

  • 2-Electrode Conductivity Cells

    Thermo Scientific Orion

    The two electrode cells are able to measure low, standard and high conductivity samples depending on the cell constant. Cells with a 0.1cm -1 cell constant are ideal for low ionic strength solutions, deionized water, and ultra pure water. Glass/platinum cells are the best for chemically reactive…

  • Backlit, rugged waterproof meter is ideal for any environment Intuitive,user-friendly icons - electrode status displays cell constant Grip-Clip holder quickly and easily secures probe to beaker/container USB and RS-232 output for up to 500 data sets 500 hours battery life or…

  • 1 year warranty CE Mark Highly stable and accurate readings with large LCD display. Designed for simple one-hand operation. Simultaneously displays the parameter being measured and temperature in ºC or ºF. Features automatic temperature compensation, 2 pt. calibration, auto power off, hold…

  • Waterproof and dustproof with IP67 rating and it floats! This microprocessor-based CON 600 Conductivity meter features a superior waterproof housing that floats! It’s perfect for conditions that ruin ordinary meters. The CON 600 reads conductivity from 0 to 199.9 mS with…

  • Thomas Nos. 1200Q29 and 1200Q30 Simultaneous display of conductivity or TDS and temperature Automatic selection of range for best resolution Calibration by cell constant or standard solutions Automatic standard recognition Storage of up to 32 results Bi-directional RS232 link to…

  • An affordable way to take consistent, accurate conductivity measurements in your laboratory Compact size frees up bench space Large brightly lit display allows for easy reading of measured values Easily toggle between conductivity and TDS at the touch of a button! CON 700…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.