Heating Mantles
-
Electromantle® EM Series Heating Mantles With Controller
Electrothermal (Cole-Parmer)Unique Electrothermal replaceable heating element/cartridge Heating mantle and controller in one unit Polypropylene housing The EM Series Electromantle incorporates the proven electrothermal coiled, flexible heating element in special insulation and features a “power…
-
HM Lower Hemispherical Heating Mantles
BriskHeatProduct Highlights Apply uniform heat to round-bottom flasks Excellent alternative to other heating methods like a bunsen burner Ideal for use with a basket ring stand Low Watt Density Specifications Fiberglass cloth outer shell Uniform, low-watt density…
-
Our controllers feature solid-state proportional voltage power control in a compact benchtop design. Controllers provide accurate manual control of heating mantles, tapes and all other resistive loads with an adjustable output range from 5 to 100% of the rated voltage. All units are supplied with a…
-
Heating mantles are preferred over Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series STM mantle for applications needing more heat. Aluminum Housed Mantles Feature: …
-
Thomas No. 1197F52 is lightweight benchtop unit with cylindrical steel housings (3 3/4 × 3 1/2 in..), gray epoxy finish, polyurethane feet, pilot lamp, 3-wire receptacle (U.S. plug) on a 12 in. cord, and a 4 ft, 3-wire power cord with U.S. plug. Used to control THERMOWELL heating…
-
CMU Controlled Electromantles™
Electrothermal (Cole-Parmer)CMU Controlled Electromantles CMU metal-cased Electromantles are used in chemistry to heat liquids in round bottom flasks. They are ideal for busy laboratories with multiple users as they are very safe to use, the metal case being designed to remain "cool-to-the-touch" when in…
-
United Scientific™ Digital Heating Mantles With Stirrers
United Scientific SuppliesThis series of digital heating mantles includes a built-in stirrer function. Separate knobs control the temperature level up to 400° C and stirring speed up to 800 rpm. The external probe allows the temperature of the contents of the flask to be directly measured. Case is constructed of durable…
-
CMUV Electromantles™ for Large Volume Flasks & Funnels
Electrothermal (Cole-Parmer)The CMUV Electromantles deliver the benefits of the CMU Electromantle, but do so for very large 60° funnels, as well as pear-shaped and round bottom flasks. This is achieved through a "V-shaped" design for the heating mantle, with funnels being accommodated through a bottom opening in the…
-
Powrtrol Heating Mantle Controller
Glas-ColProvides precise manual control of heating mantles, tapes, cords and other resistive loads Adjustable output range from 3-100% of rated voltage Mount on lattice work or bench top Model 5915A01 will accommodate non-conductive loads to 1200 watts; model 5915A05 to 2400 watts. Electrical…
-
1-Way Heating Controllers
Electrothermal (Cole-Parmer)Electrothermal offers 3 different models of 1-Way Heating Controllers which operate up to 800W (MC5), 1800W (MC242) or 2300W (MC227); MC228X1 is the 115V version of MC227 and operates up to a maximum of 1100W. These heating controllers can control one piece of laboratory equipment at a time, or an…
-
HM Table Top Heating Mantles
BriskHeatProduct Highlights Self-supporting: can be placed directly on counter top Easy viewing of flask contents Stackable for easy storage Includes 6-foot (1.8m) power cord with either a NEMA 1-15 (for 120VAC) or NEMA 6-15 (for 240VAC) plug Temperature controller is…
-
The Series TM Resin Reaction Flask mantle provides even heat distribution to prevent scorching of clear resinous material. One-circuit heat input simplifies temperature control.
-
Splashguard
Glas-ColSplash Guards can help prevent mantle damage from chemical spillage and improve operating safety when heating liquids. The shield is appropriate for use with low-wattage mantles (Series M and TM) for flasks, glass beakers, steel beakers, resin flasks, and Buchner funnels. A rugged silicone pad…
-
United Scientific™ Analog Heating Mantles With Stirrers
United Scientific SuppliesThis series of analog heating mantles includes a built-in stirrer function. Separate knobs control the temperature level up to 400° C and stirring speed up to 800 rpm. Case is constructed of durable stainless steel and aluminum materials. Knitted mantle is made from glass fiber yarn and…
-
HM Metal-Housed Heating Mantles
BriskHeatBriskHeat HM Metal-Housed Heating Mantles are fiberglass insulated heaters for laboratory and pilot laboratory applications. They are used to heat a variety of round bottom shaped vessels, to either increase temperature or keep media at a constant process temperature. All heating mantles are…
-
Heaters
Glas-ColGriffin beaker heaters Maximum internal temperature 450°C Resilient and pliable interior, which cradles fragile beakers Heat is concentrated at the bottom, so even small liquid volumes can be heated Glass cloth mantle conforms to shape of beaker for even application of heat Controller…
-
Multi (Extraction) Mantles: 6 Recess Model
Electrothermal (Cole-Parmer)The Multi (Extraction) Mantle with six recesses has a built-in electronic controller and offers a choice of heater only (EME6) or heater/stirrer (EMEA6) combination models. They may be used with the FM110 Flow Monitor. The vented case's unique air flow ensures the case remains…
-
Electrothermal EMA Stirring Heating Mantles
Electrothermal (Cole-Parmer)The EMA Electromantle shares all the features of the standard EM Electromantle, but has the added functionality of magnetic stirring. The solid state stirring circuitry is built into the base of the main housing and provides powerful stirring over a range of capacities and viscosities. The stir bar…
-
Insuleze Insulating Kit
Glas-ColThe ideal, no-hassle way to prevent unwanted heat transfer in the lab Three different InsulEze kits can be used alone or in combination to insulate almost any laboratory configuration Can be used as a heat shield, a cold shield, for insulating over heaters, as a shock absorber, as a…
-
CMU Uncontrolled Electromantles™
Electrothermal (Cole-Parmer)CMU Uncontrolled Electromantles CMU heating mantles are used in wet chemistry to heat liquids in round bottom flasks. The metal case is designed to remain "cool-to-the-touch" when in operation. Electrothermal heating mantles have a grounded stainless steel earth screen covering the…
-
Heating Mantle RB Flask 50ml
Glas-ColHeating mantles are preferred to Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series TM spherical flask mantle covers only the flask's bottom half, letting you see its full…
-
EXTRACT APP/STIR 6W 500ML 110V
Techne (Cole-Parmer)The EMEA60500/CEX1 Stirring Multi (Extraction) Mantle with six recesses has a built-in electronic temperature controller and stirring control. It may be used with the FM110 Flow Monitor to cntrol water flow through the glass condenser. The vented case's unique air flow ensures the case remains…
-
Support Extension 250-500 ml
Glas-ColThe extension support attached to a stable ring stand or distillation rack can be adjusted to any convenient height. Extension supports should be used with smaller aluminum housed heating mantles. Steel ring construction with a 6" shank
-
HM Spherical Heating Mantles
BriskHeatProduct Highlights Opening holds 1, 2, or 3 neck flasks on ring stand Zipper fastens upper and lower halves together 120VAC model includes 3” (76mm) lead wire with NEMA L1-15R connector and a 4-foot (1.2m) power adaptor cord with NEMA 1-15 plug. …
-
Series O Beaker Fabric Mantles
Glas-ColThis mantle can accomodate and efficiently heat all types of straight walled metal beakers by preventing contact of heating elements and vessel walls with inner layers of glass fabric. Also available for glass beakers with resilient and pliable interior glass fabric which cradles fragile beakers.…
-
CMUA Electromantles™ for Heating and Stirring
Electrothermal (Cole-Parmer)CMUA Electromantles share all the excellent features of the CMU Electromantle, but with the added functionality of magnetic stirring. For convenience and safety, the electric circuitry for stirring is built into the base of the heater, enabling powerful stirring over a wide range of solution…
-
Our OptiChem®; line of heating mantle controllers feature solid-state proportional voltage power control in a compact benchtop design. Controllers provide accurate manual control of heating mantles, tapes and all other resistive loads with an adjustable output range from 5 to 100% of the rated…
-
Multi (Extraction) Mantles: 3 Recess Model
Electrothermal (Cole-Parmer)The Multi (Extraction) Mantle with three recesses has a built-in electronic controller and offers a choice of heater only (EME3). They may be used with the FM110 Flow Monitor. The vented case's unique air flow ensures the case remains "cool-to-the-touch". For Heater…
-
Electromantle® EMV and EMX Heating Mantles
Electrothermal (Cole-Parmer)EMX Spill-proof Electromantles and EMV V-shaped Electromantles may accommodate 60° funnels, pear-shaped or round botom flasks. They have been designed to accept a large range of flasks and funnel sizes for added flexibility. The stainless steel screen on all EMV models covers the heater…
-
Digi-Mantles
Electrothermal (Cole-Parmer)Digi-Mantles enable a round bottom flask of 250ml, 500ml or 1000ml capacity to be stirred and heated up to an element temperature of 450°C through precise electronic control, giving an accurate measure of temperature and stirring. The modular design allows heating cartridges of different sizes to…
-
Model TEM Stirmantles
Glas-ColHeating Mantles/Stirrers in Self-Standing Metal Case Eliminates need for mantles with holes or very thin insulation that will accommodate separate stirring devices The optional EMC-4 StirControl II (Thomas number 5912M10) creates and synchronizes a rotating magnetic field within the StirMantle…
-
Similar to CG-15005-01, but the voltage output can be adjusted between 30 and 60V. Controller is 4"; W x 5"; D x 3.7 "; H. All units are supplied with a 6ft separable power cord, a grounded, 3-wire receptcle and lighted power switch. Controller for use with CG-14000 and CG-14002…