Mantles, Heating

Compare Tool

Select up to 3 products

HomeAll Products

Mantles, Heating

1 - 32 of 56
Sort
View
Show
  • Electromantle® EM Series Heating Mantles With Controller

    Electrothermal (Bibby Scientific US)

    Unique Electrothermal replaceable heating element/cartridge Heating mantle and controller in one unit Polypropylene housing The EM Series Electromantle incorporates the proven electrothermal coiled, flexible heating element in special insulation and features a “power…

  • Heating Mantles

    Glas-Col

    For flasks, resin kettles, etc. Constructed of aluminum exterior for extreme durability Form fitting for even heat distribution Internal operating temperature limit of 450°C. Usable with a splash guard or poncho shield for increased safety and life. Certified by Canadian…

  • Soxhlet Extraction Apparatus with Heating Mantle

    United Scientific Supplies

    This unique set includes matched components to provide a convenient Soxhlet extraction workstation. The setup includes a heating mantle with stirrer, 250ml borosilicate glass boiling flask, 100ml borosilicate glass Soxhlet extractor, 300mm borosilicate glass Allihin condenser with glass connectors,…

  • Electrothermal EMA Stirring Heating Mantles

    Electrothermal (Bibby Scientific US)

    The EMA Electromantle shares all the features of the standard EM Electromantle, but has the added functionality of magnetic stirring. The solid state stirring circuitry is built into the base of the main housing and provides powerful stirring over a range of capacities and viscosities. The stir bar…

  • Electromantle® EMV and EMX Heating Mantles

    Electrothermal (Bibby Scientific US)

    EMX Spill-proof Electromantles and EMV V-shaped Electromantles may accommodate 60° funnels, pear-shaped or round botom flasks. They have been designed to accept a large range of flasks and funnel sizes for added flexibility. The stainless steel screen on all EMV models covers the heater…

  • Digi-Mantles

    Electrothermal (Bibby Scientific US)

    Digi-Mantles enable a round bottom flask of 250ml, 500ml or 1000ml capacity to be stirred and heated up to an element temperature of 450°C through precise electronic control, giving an accurate measure of temperature and stirring. The modular design allows heating cartridges of different sizes to…

  • HM Spherical Heating Mantles

    BriskHeat

    Product Highlights Opening holds 1, 2, or 3 neck flasks on ring stand Zipper fastens upper and lower halves together 120VAC model includes 3” (76mm) lead wire with NEMA L1-15R connector and a 4-foot (1.2m) power adaptor cord with NEMA 1-15 plug. …

  • Series O Beaker Fabric Mantles

    Glas-Col

    This mantle can accomodate and efficiently heat all types of straight walled metal beakers by preventing contact of heating elements and vessel walls with inner layers of glass fabric. Also available for glass beakers with resilient and pliable interior glass fabric which cradles fragile beakers.…

  • Series TM Round Resin Reaction Mantles

    Glas-Col

    The Series TM Resin Reaction Flask mantle provides even heat distribution to prevent scorching of clear resinous material. One-circuit heat input simplifies temperature control.

  • High Temperature Heating Mantles for Round Bottom Flasks

    Glas-Col

    Heating mantles are preferred over Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series STM mantle for applications needing more heat. Aluminum Housed Mantles Feature: …

  • Resin Fabric Mantles

    Glas-Col

    This mantle's even heat distribution prevents scorching of clear resinous materials. It's one-circuit heat input simplifies temperature control. Resin flask mantles, as well as most other Series O mantles, are available modified to accept vessel drains or other tubulations.

  • Heating Mantles with Stirrer

    United Scientific Supplies

    HMS1500 series Mantles feature stirring capability (50 – 750 RPM). Heating and stirring functions are independently controlled by 2 separate knobs. Each unit is supplied with a magnetic stir bar. Mantles with stirrer feature polyurethane coated aluminum exteriors and a high quality…

  • Digitrol II Heating Mantle Controller

    Glas-Col

    Use with heating mantles, tapes, cords, small ovens and other resistive heating loads Digital dual output display for set point and process temperature indication Automatic tuning for accuracy with minimum overshoot Auto cold junction compensation and thermocouple break protection …

  • HM Lower Hemispherical Heating Mantles

    BriskHeat

    Product Highlights Apply uniform heat to round-bottom flasks Excellent alternative to other heating methods like a bunsen burner Ideal for use with a basket ring stand Low Watt Density Specifications Fiberglass cloth outer shell Uniform, low-watt density…

  • EMC-4 StirControl II Speed Controller for StirMantles

    Glas-Col

    For use with Thomas 5912L10 series Synchronizes the rotation of the magnetic fields with its solid-state electronic controls Fine control of stirring speed; there is almost no variation; no speed increase in warming or slowdown in cooling Can be reproducibly set to any given speed; range 50…

  • Premier Heating Mantle

    Glas-Col

    Unique design improves lab safety and convenience with several new features not found on other heating mantles Chemical-resistant cabinet Housing remains cool to the touch during operation UL fire-rated plastic enclosure Spills are channeled away from heating element Built-in proportional…

  • Powrtwin Heating Mantle Controller

    Glas-Col

    Controls two separate circuits independently Provides precise manual control of heating mantles, tapes, cords and other resistive loads Adjustable output range from 3-100% of rated voltage Use on bench top or mount to lattice work using clamp provided on back panel Will…

  • Mantle Minder II Heating Mantle Controller

    Glas-Col

    Provides automatic, time-proportioning control of temperature for loads of up to 1,200 watts Temperature range 0-500°C (0-1,000°F) Used with heating mantles, tapes, cords, small ovens and other resistive heating loads Controller has a calibrated set-point dial in °C and…

  • CMU Uncontrolled Electromantles™

    Electrothermal (Bibby Scientific US)

    CMU Uncontrolled Electromantles CMU heating mantles are used in wet chemistry to heat liquids in round bottom flasks. The metal case is designed to remain "cool-to-the-touch" when in operation. Electrothermal heating mantles have a grounded stainless steel earth screen covering the…

  • Mantle Accessory

    Glas-Col

    Heating mantles must be operated through a power control. Heating mantles are preferred to Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series TM mantles for paint cans in…

  • Support Extension 250-500 ml

    Glas-Col

    The extension support attached to a stable ring stand or distillation rack can be adjusted to any convenient height. Extension supports should be used with smaller aluminum housed heating mantles. Steel ring construction with a 6" shank

  • HM Table Top Heating Mantles

    BriskHeat

    Product Highlights Self-supporting: can be placed directly on counter top Easy viewing of flask contents Stackable for easy storage Includes 6-foot (1.8m) power cord with either a NEMA 1-15 (for 120VAC) or NEMA 6-15 (for 240VAC) plug Temperature controller is…

  • Heating Mantles

    Across International

    Across International heating and stirring mantles come standard with digital display for the most accurate control. The large display interface makes it easy to quickly and precisely adjust temperature and rotation speeds. The DigiM mantle is equipped with two sets of thermocouples for proper…

  • Heating/Insulating Tops

    Glas-Col

    This mantle helps prevent vapor condensation in the upper half of a flask during distillation of high-boiling materials. The tops are designed for use with Series M, TM, or STM mantles. They protect the flask, the solutions, and the laboratory from drafts, which would disturb the reflux ration…

  • Heating Mantle RB Flask 50ml

    Glas-Col

    Heating mantles are preferred to Bunsen burners or hot plates for organic liquids. They provide even heating (no hot spots) and maximum surface coverage for better temperature uniformity. The Series TM spherical flask mantle covers only the flask's bottom half, letting you see its full…

  • Series M Mantles

    Glas-Col

    The Series M mantle is the most compact mantle with an aluminum shell that can heat flasks up to 72 liters. Like the Series TM, this mantle has a durable aluminum housing outside and resilient glass fabric inside to support flasks and protect flask walls from thermal strain. Only the bottom of the…

  • Mantle Bottom Type CSA 12000ml

    Glas-Col

    The Series O spherical flask mantle covers only the flask's bottom half, letting you see its full contents. Fabric exterior provides effective heating in a space saving configuration Fabric interior to softly nest glass vessels to reduce the chance of thermal shock and damage to…

  • Mantle Accessory

    Glas-Col

    Rigid housing provides strength and durability while supporting the weight of the vessel Fabric interior to softly nest glass vessels to reduce the chance of thermal shock and damage to glassware Withstands 400°C internal operating temperature Feet on smaller sizes designed to provide…

  • Electrothermal CMUT Multiple Volume Heating Mantles

    Electrothermal (Bibby Scientific US)

    The CMUT Electromantle is a multiple volume CMU Electromantle, able to accommodate round bottom flasks of between 250ml to 1000ml capacity. Its key features are otherwise the same as for the CMU Controlled Electromantles. The CMUT Electromantle is used in wet chemistry to heat liquids in round…

  • Heating Mantles

    United Scientific Supplies

    These heating mantles are designed for use with round bottom flasks. Features include polyurethane coated aluminum exteriors and a high quality knitted mantle with glass fiber underlay for uniform distribution of heat. Maximum operating temperature is 400°C. Mantles can be used in a wide range…

  • Insuleze Insulating Kit

    Glas-Col

    The ideal, no-hassle way to prevent unwanted heat transfer in the lab Three different InsulEze kits can be used alone or in combination to insulate almost any laboratory configuration Can be used as a heat shield, a cold shield, for insulating over heaters, as a shock absorber, as a…

  • Multi (Extraction) Mantles: 3 Recess Model

    Electrothermal (Bibby Scientific US)

    The Multi (Extraction) Mantle with three recesses has a built-in electronic controller and offers a choice of heater only (EME3). They may be used with the FM110 Flow Monitor. The vented case's unique air flow ensures the case remains "cool-to-the-touch". For Heater…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.