Vacuum & Gas Manifolds
Explore our selection, which includes double vacuum manifolds, double vacuum/inert gas manifolds, air sampling manifolds, vacuum manifold accessories, gas manifolds, and drying assemblies. These advanced systems ensure seamless operations, allowing you to easily manage vacuum and gas processes.
In this category, you'll find trusted brands such as SP Wildmad-LabGlass, Kemtech America, Ace Glass, Chemglass, Advantec MFS, and Sartorius, each renowned for their quality and innovation.
Experience the manifold benefits of our vacuum & gas manifolds, including enhanced laboratory efficiency and seamless vacuum and gas handling. Whether you need a Schlenk manifold, a vacuum manifold, or a gas manifold, our collection offers the highest precision and flexibility for your lab's operations.
Elevate your lab's vacuum and gas handling capabilities with our products, which provide a reliable performance for your scientific endeavors.
-
Visiprep™ SPE Manifold Replacement Solvent Guide Needles
MilliporeSigmaFor use with standard, 12- and 24-port models (optional use with 57030-U & 57250-U), stainless steel.
-
Unique design, double bank manifold with the valves sealed in a vertical position. This design permits the user an unobstructed view of whether the valve is in the open or closed position while also exposing the PTFE valves to less outgassing (when the front bank of the manifold is used for inert…
-
Manifold, Tip-Off
Ace GlassUse to tip-off NMR tubes by inserting in lower Ace-Thred port and tightening via bushing. Vacuum line is connected to side hose connection. Tube is then tipped-off with flame. Aluminum shield helps retard heat transfer. Each port individually controlled by smooth acting, semi-needle, threaded PTFE…
-
SYNTHWARE Solvent Transfer Manifold
Kemtech AmericaSolvent Transfer Manifold Joints: 24/40 Valve Size: 0-4mm Overall Height: 140mm Overall Width: 380mm
-
SYNTHWARE High Vacuum Manifolds, Solid Glass Stopcocks
Kemtech AmericaWith 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Distance between stopcocks is 75mm center to center.
-
Aluminum Funnel Filter Manifolds
Dun-Rite MachiningThis aluminum manifold is lightweight and durable for easy handling in small work areas. While being easier to handle and less expensive than stainless steel, and still retaining the strength of alloy. Designed to be used in the vacuum filtration of liquids for analysis of microbiological or…
-
Carb Octopus Air Sampling Manifold
Ace GlassThe vertically mounted Carb Octopus air sampling manifold design features an inner tube which allows condensation to drip to the collection bottle and away from the #7 Ace-Thred instrument ports. Available in standard 4 or 8 port configurations.
-
SYNTHWARE Vacuum Single Manifold with #15 O-Ring Joints
Kemtech AmericaVacuum Single Manifold, High Vacuum Valves, #15 O-Ring Joints: Ports: 4, Valve Size: 0-8mm
-
Microsart 1, 2, 3, & 6-branch manifold for Microsart filtration units and funnels Equipment for the filtration of liquid samples in the microbiological quality control by vacuum; with Microsart base support for the use of Microsart Funnels or Microsart@filter, with venting filter and…
-
Visiprep™ SPE Vacuum Manifold, Standard, 24-Port Model
MilliporeSigmaSPE is a form of chromatography, and, as with other chromatographic techniques, control of flow rate is critical for maintaining reproducible extractions. Unlike other vacuum manifolds, the Visiprep system contains a patented valve system that allows for precise flow control through each SPE tube…
-
Filter Holder Manifolds
MilliporeSigmaVacuum manifolds support simultaneous filtration of three or six test samples. Use Millipore glass, plastic or stainless steel filter holders fitted with standard No. 8 perforated stoppers over holder outlets. Manifolds connect to single vacuum source and use separate control valves at…
-
Gas Manifolds, 4-Place, Glass Stopcocks
ChemglassFour port manifold with 2mm bore glass stopcocks on the ports. A "T"-bore stopcock is located 100mm from the end of the manifold and 40mm from the first port. The distance between the other 3 ports is 50mm with the last port being 75mm from the opposite end of the manifold. The entire…
-
Sterility Test Manifold and Holders
MilliporeSigma3- and 6-place manifolds for sterility testing Stainless steel body, valves and filter supports
-
SYNTHWARE Manifold with #15 O-Ring Joints
Kemtech AmericaWith 4mm double hollow high vacuum stopcocks. This four–port manifold is fitted with two 14/20 and 24/40 inner joints, and is 100mm center to center joints.#15 O-ring joint stopper (S480015) and #15 O-ring joint to serrated hose adapter have to be ordered separately. Viton® O-rings can be…
-
Vacuum Gauges, Analog, 1000-1 Microns
ChemglassEconomical thermocouple gauge has fast response and high stability. Gauge is supplied either in a bench top case with handle or panel mount style. Gauge utilizes a 8-pin Hastings-Raydist DV-6M thermocouple gauge tube having a 10ft cord. Gauge tube is threaded with 1/8 " male NPT for use with…
-
Microsart 1, 3 & 6-branch manifold with 100ml Stainless Steel Funnel Equipment for the filtration of liquid samples in the microbiological quality control by vacuum; with base support for 47 and 50mm filter and 100ml stainless steel funnel, with silicone tubing pack size 1
-
Gas Manifolds, 4-Place, PTFE Stopcocks
ChemglassSimilar to CG-1814 but supplied with all PTFE stopcocks.
-
Microfil Filtration System
MilliporeSigmaThis cost-effective Microfil® system uses presterilized, ready-to-use funnels and mem/panes on a patented filtration support. Convenient, easy to use system for well-accepted mem/pane filtration method conforms to international standards: CEN, Standard Methods, WHO Disposable,…
-
Double bank manifold available in 3, 4 or 5 port configuration. Forward facing 0-8mm Chem-Vac™ Chem-Cap® valves permit easy operation of manifold inside of a fume hood. Main ports are spaced 100mm center to center with an additional 2 ports on the upper bank that can be used for gauging…
-
SYNTHWARE Double Manifold, High Vacuum Valve
Kemtech AmericaThis manifold is designed to incorporate a 0-8mm high vacuum valve as the vacuum shut-off. The front tube is for inert gases (17mm O.D.), with a 10mm hose connection. The rear tube is for vacuum (22mm O.D.), with two 35/20 socket joints. Please order each component separately.
-
Walters Manifold
Ace GlassHign vacuum manifold systems feature Easy Action PTFE stopcock valves providing for greaseless operation. Double-tube codes -50 & -54 feature Ace-Threds and 8mm OD tube-end ports. Double tube code -52 features hose barbed connections and 45 degree port placement. Walters manifold, code -40,…
-
Flexible and compact, this 4-port line is constructed using CG-474-02, 4mm double oblique hollow high vacuum greased stopcocks on all four ports. Ports are fitted with two 14/20 inner joints and two 24/40 inner joints and are spaced 5" center to center. This configuration permits use directly…