Manifolds, Vacuum/Gas

Compare Tool

Select up to 3 products

HomeAll Products

Manifolds, Vacuum/Gas

1 - 32 of 56
Sort
View
Show
  • Vacuum Manifolds

    Sartorius

    Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds. Stainless Steel Filter Holders Stainless steel holders differ in their funnel capacity (choice of 40 ml, 100 ml or 500 ml) and in their valve type (part numbers ending with CS feature sterile venting). They are…

  • Stainless Steel Vacuum Manifold

    Advantec MFS

    1-place, 3-place, or 6-place Standard cup accepts No.8 or 8b stopper Choice of 2- or 3- way valves Vacuum manifolds allow filtration of multiple samples either at once or independently by controling the separate branch valves. The durable type 304 stainless steel can be used for…

  • Microfil Filtration System

    MilliporeSigma

    This cost-effective Microfil® system uses presterilized, ready-to-use funnels and mem/panes on a patented filtration support. Convenient, easy to use system for well-accepted mem/pane filtration method conforms to international standards: CEN, Standard Methods, WHO Disposable,…

  • Stainless Steel Vacuum Manifold

    Thermo Scientific Nalgene

    Nalgene 345 Solid and stable on the bench top Designed with three vacuum outlets, each with leakproof, two-way valve and vent port Each outlet securely holds a No. 8 stopper and the stem filter funnel without interference Autoclavable Easy manipulation of individual funnels…

  • PVC Manifold

    Advantec MFS

    Lightweight Resistant to acids Standard cup accepts a No.8 or 8b stopper Lightweight and durable PVC material makes this vacuum manifold a great alternative to stainless steel. Polyvinylchloride(PVC) is resistant to acids. The standard cup accepts a No.8 or 8b stopper to adapt to…

  • Visiprep™ SPE Vacuum Manifold, Standard, 24-Port Model

    MilliporeSigma

    SPE is a form of chromatography, and, as with other chromatographic techniques, control of flow rate is critical for maintaining reproducible extractions. Unlike other vacuum manifolds, the Visiprep system contains a patented valve system that allows for precise flow control through each SPE tube…

  • Vacuum Manifold Accessories

    Sartorius

    Accessories for Combisart and Microsart Combi.jet Vacuum Manifolds.

  • Vacuum/Inert Manifold, 4-Ports, Airfree®, Schlenk Line

    Chemglass

    Similar to the AF-0450 5-port line, except that the line is constructed using 0-4mm Chem-Vac™; Chem-Cap®; valves (A) instead of the CG-468-02 greased glass stopcocks on all of the 4-ports. The end cap on the vacuum line is a #30 o-ring joint while the inert gas line has a #9 o-ring joint…

  • Microtest Microplate Manifold

    DWK Life Sciences (Wheaton)

    The stainless steel manifolds (with PTFE stoppers) allow convenient distribution or aspiration in 24- and 96-well plates. They securely fit syringes of the Dosys™ line as well as the Acura 865. Fully autoclavable (121 °C / 250 °F)

  • Double Vacuum Manifold

    Wilmad-LabGlass - SP Scienceware

    This borosilicate glass Air-Tite vacuum gas manifold (Schlenk line) is designed with double oblique pressure/vacuum stopcocks with 4mm bores and a 16.2/56 plug size. The stopcocks simplify evacuation or pressurization with an inert atmosphere. Manifold is 1" O.D.

  • Visiprep™ SPE Vacuum Manifold, DL (Disposable Liner), 12-port model

    MilliporeSigma

    Patented screw-type valves within each SPE port for precise flow control Glass basin will not dissolve, fog, or discolor when exposed to solvents Legs on cover allow user to easily rest cover on work surface when removed from the manifold Screw-type solvent-resistant vacuum bleed gauge and…

  • SYNTHWARE Manifold with #15 O-Ring Joints

    Kemtech America

    With 4mm double hollow high vacuum stopcocks. This four–port manifold is fitted with two 14/20 and 24/40 inner joints, and is 100mm center to center joints.#15 O-ring joint stopper (S480015) and #15 O-ring joint to serrated hose adapter have to be ordered separately. Viton® O-rings can be…

  • SYNTHWARE Vacuum Double Manifold with #15 O-Ring Joints

    Kemtech America

    Vacuum Double Manifold, High Vacuum Valves, #15 O-Ring Joints: Ports: 4, Valve Size: 0-8mm

  • Gas Manifold with Vacuum Chambers

    DWK Life Sciences (Kimble)

    An all-glass manifold for connecting inert gas and vacuum sources. Double vacuum gas manifold with vacuum chambers. Fabricated from 1/2" medium wall tubing Stopcocks are 4 mm bore glass with lower vacuum chamber and are spaced 85 mm apart Top right connection is for inert gas and…

  • Filter Manifold Stopcock For Cat #345-0001

    Thermo Scientific Nalgene

    Manifold Stopcock Filter for Nalge # 345-0001

  • SYNTHWARE Double Manifolds, Hollow Glass Stopcocks

    Kemtech America

    1164V90-V91 Double Manifold, Hollow Glass Stopcocks, Spherical Joints, 4 and 5 port manifold available, Joint Size: 35/20, Connections front-left right and rear-right, Overall Width: 365 and 450mm available. 1164V92 Double Manifold, Hollow Glass Stopcocks, Spherical Joints, Ports: 4, Joint…

  • Aluminum Funnel Filter Manifolds

    Dun-Rite Machining

    This aluminum manifold is lightweight and durable for easy handling in small work areas. While being easier to handle and less expensive than stainless steel, and still retaining the strength of alloy. Designed to be used in the vacuum filtration of liquids for analysis of microbiological or…

  • Visiprep™ SPE Manifold Replacement Solvent Guide Needles

    MilliporeSigma

    For use with standard, 12- and 24-port models (optional use with 57030-U & 57250-U), stainless steel.

  • Vacuum Gauges, Analog, 1000-1 Microns

    Chemglass

    Economical thermocouple gauge has fast response and high stability. Gauge is supplied either in a bench top case with handle or panel mount style. Gauge utilizes a 8-pin Hastings-Raydist DV-6M thermocouple gauge tube having a 10ft cord. Gauge tube is threaded with 1/8 " male NPT for use with…

  • Vacuum Manifolds, Inert Gas, Airfree®, Schlenk

    Chemglass

    Single bank vacuum manifold with 0-8mm Chem-Vac™ Chem-Cap® valves mounted on a 45° angle to the user permitting easy operation inside of a fume hood. Ports are spaced 75mm center to center. All connection ports are #15 o-ring connections that incorporate a greasefree o-ring seal.…

  • Sterility Test Manifold and Holders

    MilliporeSigma

    3- and 6-place manifolds for sterility testing Stainless steel body, valves and filter supports

  • SYNTHWARE Double Manifold, High Vacuum Valve

    Kemtech America

    This manifold is designed to incorporate a 0-8mm high vacuum valve as the vacuum shut-off. The front tube is for inert gases (17mm O.D.), with a 10mm hose connection. The rear tube is for vacuum (22mm O.D.), with two 35/20 socket joints. Please order each component separately.

  • Gas Manifolds, 4-Place, Glass Stopcocks

    Chemglass

    Four port manifold with 2mm bore glass stopcocks on the ports. A "T"-bore stopcock is located 100mm from the end of the manifold and 40mm from the first port. The distance between the other 3 ports is 50mm with the last port being 75mm from the opposite end of the manifold. The entire…

  • Vacuum Manifolds

    Porvair

    Designed to be easily assembled and disassembled by robotic manipulators, thus enabling productive automation of SPE or DNA clean-up procedures.  Able to accommodate collection plates from 14mm-44mm in height and adapable for working with short, medium and long skirts and drip directors, the…

  • Microfil V Filtration Device

    MilliporeSigma

    With Microfil V filtration devices, there are no filter holders to assemble, no filter funnels to clean, and no filter support sterilization is needed after each filtration. Simply snap a Microfil V filtration device off the convenient carrying tray and you're ready to test. Place the…

  • Vacuum/Inert Lines, 4-Ports, Okuda, Airfree®, Schlenk Line

    Chemglass

    Main vacuum line with 4ea 24/40 inner ports (A) having a unique configuration of 0-4mm Chem-Vac Chem-Cap®; valves. The valves are sealed to either the vacuum or inert gas side of the manifold and then bent to a 90º angle, forming a strong but very compact assembly. This configuration…

  • SYNTHWARE Vacuum Manifolds, High Vacuum Valves

    Kemtech America

    With a serrated hose connection (10mm O.D.) at left or right hand side. Main tube is 22mm O.D. and the distance between valves is 100mm center to center.

  • SYNTHWARE High Vacuum Manifolds, Solid Glass Stopcocks

    Kemtech America

    With 4mm double oblique, high vacuum solid glass stopcocks precision ground with corresponding numbers on barrel and plug. Solid glass stopcocks have constant pressure retention devices. Distance between stopcocks is 75mm center to center.

  • SYNTHWARE Nitrogen/Argon Manifolds

    Kemtech America

    With 14/20 outer joint at the center to fit a rubber septum for keeping syringes under an inert environment cutting down on the number used.

  • Sterility Test Manifold

    Advantec MFS

    1-place or 6-place Support cup accepts a No.8 or 8b stopper Features a flushing manifold Applications requiring a closed system, as in sterility testing, use the sterility test manifold. It features a rear-mounted flushing or rinse manifold pipe which allows liquid to be brought…

  • Filter Holder Manifolds

    MilliporeSigma

    Vacuum manifolds support simultaneous filtration of three or six test samples. Use Millipore glass, plastic or stainless steel filter holders fitted with standard No. 8 perforated stoppers over holder outlets. Manifolds connect to single vacuum source and use separate control valves at…

  • Stainless Steel Extraction Manifold

    Advantec MFS

    1-place, 3-place, or 6-place Tapered branch accepts 40/35 female joint Choice of 2- or 3- way valves Vacuum manifolds allow filtration of multiple samples either at once or independently by controling the separate branch valves. The durable type 304 stainless steel can be used for…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.