The PerkinElmer halogen lamp with an electrical rating of 12 Volt voltage and 50 Watt power makes use of UV/VIS technology and is compatible to use with spectrometers.

Lamps provide the best wavelength coverage across the working range of the spectrometer for consistently high performance. All lamps are pre-aligned and can be easily changed by the user. Our extensive quality control and inspection process demands the very best quality sources to provide high…

Multi-Element Lumina hollow cathode lamp (HCL) for the detection of elemental Potassium (K) and Sodium (Na). Please note that multi-element lamps are not designed to be used in a furnace system. Every genuine PerkinElmer lamp is designed for use with and tested on PerkinElmer spectrometers to…

Provide the best wavelength coverage across the working range of the spectrometer for consistently high performance. Changing tool order N4102048.

Our extensive quality control and inspection process demands the very best quality sources. Choosing a PerkinElmer deuterium, tungsten or xenon source provides outstanding ultraviolet and true visible performance. Exceptional performance anywhere in the detector’s 190 – 700 nm wavelength range.…

System 2 EDL Driver Assembly for all PerkinElmer models except Aanalyst 600/700/800, SIMAA 6000 and 4110 ZL

System 2 electrodeless discharge lamp for the detection of elemental Germanium (Ge). Note: PinAAcle ™ instruments require the purchase of an EDL driver assembly, part number 03030997, for each of the lamp positions to be used. In addition this element requires the use of a nitrous oxide-acetylene…

Lumina hollow cathode lamps may also be used with all earlier AA spectrometers that do not have automatic code reading capability by using an appropriate adapter cable.

The Series 200 Photo Diode Array Detector provides true UV/VISdetection andhigh resolution spectral data. The excellentsignal-to-noise characteristics make itideally suited forlow-volume or low concentration samples.

Adapter (P/N B0166354) may be required for older models of Lambda 5, 7 and 9. For optimum instrument performance, ALWAYS use original replacement sources from PerkinElmer! Our extensive quality control and inspection process demands the very best quality sources. For many of our instruments, the…

The major benefit afforded by fluorescence detection is the inherent high sensitivity of the technique coupled with outstanding specificity. The Series 200fluorescence detector provides signal to noise ratio of>700:1 from trace analysis using a 150 W xenon source.

Note: System 2 EDLs come with two coding plugs: a plug compatible with the Aanalyst series of instruments and a coding plug compatible with earlier instruments having coding capability, for example the Models SIMAA 6000, 5100(PC), 4110 ZL, 4100 ZL, 4100, 3300, 2100 and 1100(B).

User-installable spare mid-IR source lamp for Spectrum One/65/100/400/Frontier MIR Systems.

Single Element Lumina hollow cathode lamp (HCL) for the detection of elemental Barium (Ba). Please note that this element requires the use of a nitrous oxide-acetylene flame. Every genuine PerkinElmer lamp is designed for use with and tested on PerkinElmer spectrometers to assure compatibility and…

Note: System 2 EDLs come with two coding plugs: a plug compatible with the Aanalyst series of instruments and a coding plug compatible with earlier instruments having coding capability, for example the Models SIMAA 6000, 5100(PC), 4110 ZL, 4100 ZL, 4100, 3300, 2100 and 1100(B).

Multi-Element Lumina hollow cathode lamp (HCL) for the detection of elemental Calcium (Ca) and Magnesium (Mg). Please note that multi-element lamps are not designed to be used in a furnace system. Every genuine PerkinElmer lamp is designed for use with and tested on PerkinElmer spectrometers to…

System 2 electrodeless discharge lamp for the detection of elemental Tellurium (Te). Note: PinAAcle ™ instruments require the purchase of an EDL driver assembly, part number 03030997, for each of the lamp positions to be used. Electrodeless Discharge Lamps for greater brightness (EDLs) are…

System 2 electrodeless discharge lamp for the detection of elemental Rubidium (Rb). Note: PinAAcle ™ instruments require the purchase of an EDL driver assembly, part number 03030997, for each of the lamp positions to be used. Electrodeless Discharge Lamps for greater brightness (EDLs) are…

System 2 electrodeless discharge lamp for the detection of elemental Zinc (Zn). Note: PinAAcle ™ instruments require the purchase of an EDL driver assembly, part number 03030997, for each of the lamp positions to be used. Electrodeless Discharge Lamps for greater brightness (EDLs) are typically…

An adapter (N3150303) is required for use on AAnalyst™ 200/400 series instruments.

Single Element Lumina hollow cathode lamp (HCL) for the detection of elemental Cadmium (Cd). Every genuine PerkinElmer lamp is designed for use with and tested on PerkinElmer spectrometers to assure compatibility and the highest performance. PerkinElmer offers a wide range of single-element and…

Single Element Lumina hollow cathode lamp (HCL) for the detection of elemental Aluminum (Al). Please note that this element requires the use of a nitrous oxide-acetylene flame. Every genuine PerkinElmer lamp is designed for use with and tested on PerkinElmer spectrometers to assure compatibility…

Provide the best wavelength coverage across the working range of the spectrometer for consistently high performance.

Single Element Lumina hollow cathode lamp (HCL) for the detection of elemental Sodium (Na). Every genuine PerkinElmer lamp is designed for use with and tested on PerkinElmer spectrometers to assure compatibility and the highest performance. PerkinElmer offers a wide range of single-element and…

Single Element Atomax hollow cathode lamp (HCL) for the detection of elemental Lead (Pb). PerkinElmer Atomax 1.5"" hollow cathode lamps are crafted to the same high standards that have made our 2"" Lumina ™ hollow cathode lamps the best in the industry. Drawing on more than 40 years of HCL design…

Mercury Lamp for PerkinElmer Flow Injection Mercury System (FIMS)

Single Element Lumina hollow cathode lamp (HCL) for the detection of elemental Iron (Fe). Every genuine PerkinElmer lamp is designed for use with and tested on PerkinElmer spectrometers to assure compatibility and the highest performance. PerkinElmer offers a wide range of single-element and…

The PerkinElmer background corrector source deuterium lamp is compatible to use with AAnalyst 200/400 atomic absorption instruments.

Single Element Lumina hollow cathode lamp (HCL) for the detection of elemental Silver (Ag). Every genuine PerkinElmer lamp is designed for use with and tested on PerkinElmer spectrometers to assure compatibility and the highest performance. PerkinElmer offers a wide range of single-element and…

TUNGSTEN LAMP, SERIES 200 RI DETECTOR. Recommended for use in checking sensitivity for eight elements commonly determined by flame AA.

Multi-Element Lumina hollow cathode lamp (HCL) for the detection of elemental Aluminum (Al), Calcium (Ca), Copper (Cu), Iron (Fe), Magnesium (Mg), Silicon (Si), Zinc (Zn). Please note that multi-element lamps are not designed to be used in a furnace system. In addition the analysis of Aluminum and…

System 2 electrodeless discharge lamp for the detection of elemental Selenium (Se). Note: PinAAcle ™ instruments require the purchase of an EDL driver assembly, part number 03030997, for each of the lamp positions to be used. Electrodeless Discharge Lamps for greater brightness (EDLs) are…