ICP-MS Nebulizers
-
-
Capillary Tubing 18 0.043 x 0.017 for Mira Mist
PerkinElmer0. 5 meters of . 044 OD X . 018 ID. Clear Polyethylene Tubing with attached BRC 3 fitting for sample lines.
-
Concentric Quartz Nebulizer, MEINHARD Type A3
PerkinElmerThe MEINHARD concentric glass nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control.
-
Concentric Glass Nebulizer, MEINHARD Type C
PerkinElmerThe MEINHARD® concentric glass nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. For use with high dissolved solids solutions.
-
F0 Encapsulated Micro Capillary
PerkinElmerF0 Encapsulated micro tubing for microflow rates with the lowest internal volume of any nebulizer. Includes 0. 25 mm i. d. (green marker) 70 cm long micro capillary. Compatible with all MEINHARD Plus nebulizers.
-
The Cross-Flow II Nebulizer is made completely from chemically inert non-metallic materials. With new GemTips optimized for ICP-MS(0. 009in and 0. 013in orifices), the new ICP-MS Cross-Flow II Nebulizer is specially manufactured and cleaned for ultra-trace analysis. Providing high sensitivity and…
-
PFA-ST nebulizer for prepFAST
PerkinElmerPFA-ST self-aspirating nebulizer for prepFAST, with external 1/4-28 threaded connector.
-
Eluo Nebulizer Cleaner
PerkinElmerEluo Nebulizer Cleaner Particle build-up in a nebulizer capillary and tip causes sample flow to be constricted, thereby reducing nebulizer efficiency andperformance. Previously there was no simple way to effectively clean and unblock nebulizers. Now, blocked nebulizers can be safelyand easily…
-
Concentric Plus Nebulizers provide low dead volume and high sensitivity with excellent detection limits and washout. Each Plus nebulizer includes the FitKit+ gas and sample quick connect fittings. The connections are made with highpurity PFA, minimizing the chance of contamination during backflow…
-
Previously there was no simple way to effectively clean and unblock nebulizers. Now, blocked nebulizers can be safely and easily restored to optimum performance with a revolutionary new cleaning instrument - the Eluo. The Eluo is designed to efficiently deliver a cleanser through the nebulizer…
-
This nebulizer clip snapper, for MEINHARD nebulizers, is used with Avio 200 and 500 ICP-OES, and Optima 2x00 DV, 4x00 DV, 5x00 DV, 7x00 DV, and 8x00 ICP-OES series instruments.
-
Type A0.5 Quartz Nebulizer for NexION
PerkinElmerThe MEINHARD® Concentric Nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. They provide excellent sensitivity and precision for aqueous solutions and…
-
The MEINHARD concentric glass nebulizers reflect exacting standards in design and manufacturing. They provide excellent sensitivity and precision for aqueous solutions and samples with few dissolved solids (less than 1%). MEINHARD nebulizers for Optima instruments include Standard Nebulizer…
-
PTFE Capillary Tubing
PerkinElmerPFA sample capillary 0. 062 o. d. x 0. 020 i. d. in (1. 59mm x 0. 5mm)60cm length. For use with P/N WE024372 connector.
-
Concentric Plus Nebulizers provide low dead volume and high sensitivity with excellent detection limits and washout. Each Plus nebulizer includes the FitKit+ gas and sample quick connect fittings. The connections are made with highpurity PFA, minimizing the chance of contamination during backflow…
-
This kit includes: MicroMist ™ Nebulizer, Qty. 1 (N0775342) Quartz Cyclonic Spray Chamber, Qty. 1 (WE025221) 2 mm I.D. Quartz Bore Injector, Qty. 1 (WE023948) Tygon Tubing 3.175 mm I.D., Qty. 1 (02506516) 3.175 mm Tubing Insert, Qty. 1 (09903094) Front Ferrule for 6.35 mm Tube Fitting, Qty.…
-
F2 Standard Integrated Capillary
PerkinElmerF2 Standard Integrated Capillary (standard fitting with + nebulizers). F2 Standard integrated capillary for self-aspiration or pumping. Includes 0. 5 mm i.d. (orange marker) 70 cm long capillary.
-
-
PFA MicroFlow high solids large bore nebulizer with external 1/4-28 threaded connector. Ideal for strong acids, high solids, alkalis, organic solvents, soils and high salt solutions.
-
Cross-Flow II Replacement GemTip for ICP-MS
PerkinElmerIncludes a color coded set of ruby and sapphire GemTips optimized for use with ICP-MS. Orifice size: argon, (0.23mm, 0.009in) ruby red; sample, (0.34mm, 0.013in) clear. For use with the Cross-Flow II Nebulizer only.
-
Gem tip Cross-Flow II Tip Kits for Optima 8x00
PerkinElmerThe PerkinElmer GemTip Cross-Flow II Tip Kit is for use with the Optima 8x00 ICP-OES. Excellent general purpose nebulizer for the analysis of strong mineral acids (including HF) and samples with less than 5% dissolved solids. The Tip Kit includes a clear sapphire sample tip and a red ruby argon…
-
The UniFit sample tube connector is used with U-Series nebulizers.
-
Complete HF-resistant sample introduction system for NexION 300 and 350. All wetted surfaces are PTFE and Sapphire. Provides a chemically inert and clean introduction system. This kit includes: 47 mm PFA Barrel Spray Chamber with Endcap (N8142000) PFA-ST Nebulizer (N8122192) 1.8 mm I.D.…
-
Concentric PTFE Nebulizer - PFA-ST
PerkinElmerUltraclean PFA PTFE nebulizer with exchangeable capillaries to provide flow rates from 100-400 uL/min. For use with autosamplers. Requires union N8122355 to connect to autosampler probe.
-
One Sample Introduction Line for PFA-ST Nebulizer is included in the NexION 2000 ICP-MS Productivity Configuration's Consumable Kit (N8150056) and the Semi Configuration's Consumable Kit (N8150057).
-
GemTip Crossflow Nebulizer
PerkinElmerContains a PPS (carbon-filled polyphenyl sulfide) end cap with a Gem Tip clear sapphire sample tip and a Gem Tip red ruby argon tip.
-
-
The DuraMist concentric nebulizer is an economical nebulizer for high precision analyses involving samples digested in HF. The DuraMist nebulizer is recommended for samples containing up to 5% HF. For samples with higher concentrations of HF, the OpalMist PFA nebulizer is recommended.
-
Slurry Nebulizer 4mL/min for ELAN/NexION
PerkinElmerMaterial: Borosilicate glass High physical reproducibility ~ 1% TDS tolerance, typically ~ 1% High tolerance to particulates, typically up to 150um Low RSD's due to highly accurate construction Slurry nebulizers have a natural liquid uptake of 4mL/min but operate best between 1.5 - 2.5mL/min
-
-
The UniFit sample tube connector is used with U-Series nebulizers.
-
MicroFlow nebulizers are resistant to clogging, reliably self-aspirated or pumped to produce a fine aerosol for high transport effciency and high sensitivity. The PolyPro-ST MicroFlow nebulizer is a low-cost, HF-resistant alternative to the PFA nebulizer. The PolyPro nebulizer has a lower chemical…