Nebulizers

Compare Tool

Select up to 3 products

1 - 32 of 166
Sort
View
Show
  • TUBING-PFA 0.5MM ID

    PerkinElmer

    TUBING-PFA 0.5MM ID

  • The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. MicroMists with sample uptakes 0.2 – 0.4 mL/min are fitted with a UniFit connector with 1.3 O.D. x 0.50 mm I.D. x 700 mm long sample tubing. MicroMists with sample uptakes 0.05 – 0.1 mL/min are…

  • This product has a quantity of 10. Replacement connector and sample tubing for glass concentric nebulizers with EzyFit sample inlet.

  • High temperature apex-ST PFA MicroFlow nebulizer with external 1/4-28 threaded connector. These nebulizers allow self-aspiration at low sample consumption rates with the apex high sensitivity desolvation system.

  • The Conikal nebulizer is a great option for high precision, routine aqueous and organic applications. Material: Borosilicate glass High physical reproducibility ~ 1% TDS tolerance, typically up to 5% High tolerance to particulates, typically up to 75um Low RSD's due to highly accurate…

  • 0. 5 meters of . 044 OD X . 018 ID. Clear Polyethylene Tubing with attached BRC 3 fitting for sample lines.

  • The SeaSpray Concentric Nebulizer is ideal for samples with high dissolved solids and offers outstanding nebulization effciency for trace level analysis. It offers freedom from clogging while nebulizing solutions near the limit of solubility of most mineral salts, and conferring signifcant…

  • Includes:  UniFit Connector with 0.50mm ID x 1.3mm OD x 700mm long tubing (1 piece) EzyLok Connector Kit Ratchet EzyLok Connector

  • Includes:  EzyLok Connector for 4mm Tubing  EzyLok 6mm Hose Adaptor  Nebulizer Hose Clip

  • Replacement connector and sample tubing for glass concentric nebulizers with EzyFit sample inlet.

  • The benefits of the U-Series nebulizer are Resists blockage: The sample channel is uniform from the entry point to the tip, so there is nowhere for particulates to be trapped. Fast washout: Since there is nowhere for sample to be trapped, the fastest possible washout and highest sample…

  • PTFE Capillary Tubing

    PerkinElmer

    PFA sample capillary 0. 062 o. d. x 0. 020 i. d. in (1. 59mm x 0. 5mm)60cm length. For use with P/N WE024372 connector.

  • Includes a color coded set of ruby and sapphire GemTips optimized for use with ICP-MS. Orifice size: argon, (0.23mm, 0.009in) ruby red; sample, (0.34mm, 0.013in) clear. For use with the Cross-Flow II Nebulizer only.

  • OpalMist Nebulizer 0.6mL/min

  • Replacement tubing for internal standard kit.

  • Used to connect capillary tubing (Product Number: 09908265) to Cross-flow nebulizers, and to larger i.d. peristaltic pump tubing.

  • Cyclonic spray chamber drain fitting with ETFE capillary tubing - 24 length by 0.030 ID x 0.062 OD.

  • PFA-ST self-aspirating nebulizer for prepFAST, with external 1/4-28 threaded connector.

  • Contains a PPS (carbon-filled polyphenyl sulfide) end cap with a Gem Tip clear sapphire sample tip and a Gem Tip red ruby argon tip.

  • F0 Encapsulated micro tubing for microflow rates with the lowest internal volume of any nebulizer. Includes 0. 25 mm i. d. (green marker) 70 cm long micro capillary. Compatible with all MEINHARD Plus nebulizers.

  • The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. MicroMists with sample uptakes 0.2 – 0.4 mL/min are fitted with a UniFit connector with 1.3 O.D. x 0.50 mm I.D. x 700 mm long sample tubing. MicroMists with sample uptakes 0.05 – 0.1 mL/min are…

  • High solids Gem Cones are for samples with high dissolved solids (up to 20%). This cone spray nebulizer allows you to analyze samples with higher solids concentration than is possible with a Cross-Flow nebulizer. Gem Cone nebulizers require an end cap for use with Ryton Scott Spray Chambers. High…

  • The MEINHARD® Concentric Nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. They provide excellent sensitivity and precision for aqueous solutions and…

  • 700 µL/min self-aspirating sample capillary for ST nebulizer. 0.80 mm i.d., blue marker

  • Nebulizers And Nebulizer Supplies

    Agilent Technologies

  • F1 Detachable capillary for a wide range of applications. Includes 0. 80 mm i. d. (blue marker) 70 cm long capillary. Compatible with all MEINHARD Plus nebulizers.

  • Replacement tubing for internal standard kit.

  • The PerkinElmer GemTip Cross-Flow II Nebulizer is for use with the Optima 8x00 ICP-OES. It is an excellent general purpose nebulizer for the analysis of strong mineral acids (including HF) and samples with less than 5% dissolved solids.

  • The Cross-Flow II Nebulizer is made completely from chemically inert non-metallic materials. With new GemTips optimized for ICP-MS(0. 009in and 0. 013in orifices), the new ICP-MS Cross-Flow II Nebulizer is specially manufactured and cleaned for ultra-trace analysis. Providing high sensitivity and…

  • The Slurry Nebulizer excels at the analysis of slurries. One common slurry application is the analysis of used engine oils for wear metals. Any sample which consists of small particulates in a liquid matrix is a slurry and is suited to this nebulizer. Samples that contain high dissolved solids are…

  • MicroFlow nebulizers are resistant to clogging, reliably self-aspirated or pumped to produce a fine aerosol for high transport effciency and high sensitivity. The PolyPro-ST MicroFlow nebulizer is a low-cost, HF-resistant alternative to the PFA nebulizer. The PolyPro nebulizer has a lower chemical…

  • SeaSpray U-Series Nebulizer 0.4mL/min

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.