ICP-MS

Compare Tool

Select up to 3 products

1 - 32 of 416
Sort
View
Show
  • Rotary Pumps And Vacuum System Supplies

    Agilent Technologies

    The oil level on the pump should be checked every three months, when the plasma is ON Maintain the oil level between the Max and Min levels on the gauge Standard frequency for changing the oil is approximately every 4,500 hours Be careful when changing oil because the oil may have…

  • Metal Ball Joint Clip with Tension Screw for Optima 4300/5300/7300 V

    PerkinElmer

    This metal ball joint clip with tension screw is used to connect the spray chamber and torch in Optima 4300 V, 5300 V, and 7300 V ICP-OES series instruments.

  • 1-Slot HybridXLT Ceramic-Quartz Torch for Optima 8x00

    PerkinElmer

    PerkinElmer's HybridXLT torch is the latest addition to the family of PerkinElmer genuine sample introduction components. The new ceramic/quartz hybrid design provides the highest performance for your Optima ICP-OES 8x00 spectrometer. This new torch has an extended lifetime of up to 10x your…

  • Torches and Components

    Agilent Technologies

    Comprised of three Concentric Quartz tubes through which streams of argon gas pass. Three streams = plasma, auxiliary, and nebulizer (carrier) gas.

  • Peristaltic Pump Tubing and Sample Line Supplies

    Agilent Technologies

    The peristaltic pump tubing has to be washed prior to use. The common way is to run about 5% HNO 3 (v/v) solution.

  • Eluo Nebulizer Cleaner

    PerkinElmer

    Eluo Nebulizer Cleaner Particle build-up in a nebulizer capillary and tip causes sample flow to be constricted, thereby reducing nebulizer efficiency andperformance. Previously there was no simple way to effectively clean and unblock nebulizers. Now, blocked nebulizers can be safelyand easily…

  • SeaSpray U-Series Nebulizer 1mL/min

    PerkinElmer

    Material: Borosilicate glass  High physical reproducibility ~ 1%, TDS tolerance, typically up to 20%, High tolerance to particulates, typically up to 75um, Low RSD's due to highly accurate construction

  • TUBING-PFA 0.15 MM ID RED

    PerkinElmer

    TUBING-PFA 0.15 MM ID RED

  • PTFE Capillary Tubing

    PerkinElmer

    PFA sample capillary 0. 062 o. d. x 0. 020 i. d. in (1. 59mm x 0. 5mm)60cm length. For use with P/N WE024372 connector.

  • Electron Multipliers

    Agilent Technologies

  • Type C0.5 Glass Nebulizer for NexION

    PerkinElmer

    The MEINHARD® Concentric Nebulizer reflects exacting standards in design and manufacturing. Its advantages include simplicity of design and operation, reproducible and self-aligning aerosol, and close fabrication control. They provide excellent sensitivity and precision for aqueous solutions and…

  • Organics Sample Introduction Kit for Optima 8x00

    PerkinElmer

    This kit includes: 3-Slot Quartz Torch, Qty. 2 (N0780132) 1. 2 mm I.D. Alumina Injector, Qty. 2 (N0781007) Baffled Cyclonic Spray Chamber 4 mm, Qty. 1 (N0776090) GemCone ™ Low-Flow Nebulizer, Qty. 1 (N0770358) Cyclonic Spray Chamber Adapter, Qty. 1 (N0770614) Injector Adapter Washer, Qty. 1…

  • Nebulizer Liquid Fitting with ETFE capillary tubing

    PerkinElmer

    Nebulizer liquid fitting with ETFE capillary tubing - 4 length by 0. 020 ID x 0. 062 OD flanged onto female CTFE fitting Includes one male barb CTFE fitting.

  • Eluo HF Nebulizer Cleaner for OpalMist, PolyCon, DuraMist, MiraMist, SeaSpray,…

    PerkinElmer

    Previously there was no simple way to effectively clean and unblock nebulizers. Now, blocked nebulizers can be safely and easily restored to optimum performance with a revolutionary new cleaning instrument - the Eluo. The Eluo is designed to efficiently deliver a cleanser through the nebulizer…

  • GemCone High Dissolved Solids Nebulizer

    PerkinElmer

    High solids Gem Cones are for samples with high dissolved solids (up to 20%). This cone spray nebulizer allows you to analyze samples with higher solids concentration than is possible with a Cross-Flow nebulizer. Gem Cone nebulizers require an end cap for use with Ryton Scott Spray Chambers. High…

  • Nebulizers And Nebulizer Supplies

    Agilent Technologies

  • Interface Cones

    Agilent Technologies

    Compatible Part Std: Fitted as standard when instrument shipped from factory 18mm Pt cone insert is recommended for measuring H2SO4 above 2% Pt T-mode cones are not available T-mode is not used with ORS models

  • Fused Silica Obstruction Removal Kit for ST type Nebulizers

    PerkinElmer

    Fused Silica Obstruction Removal Kit for ST type Nebulizers. Used to clear blockage from ST type nebulizers. Inc Features and Benefits Pure Grade Standards for AA and ICP-OES Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final…

  • PEEK 0.4 mL/min DuraMist Nebulizer for ELAN 5000/6x00/9000/DRCs/NexION 300/350…

    PerkinElmer

    The DuraMist concentric nebulizer is an economical nebulizer for high precision analyses involving samples digested in HF. The DuraMist nebulizer is recommended for samples containing up to 5% HF. For samples with higher concentrations of HF, the OpalMist PFA nebulizer is recommended.

  • HF-Resistant Sample Introduction Kit with Sapphire Injector for NexION 300/350

    PerkinElmer

    Complete HF-resistant sample introduction system for NexION 300 and 350. All wetted surfaces are PTFE and Sapphire. Provides a chemically inert and clean introduction system. This kit includes: 47 mm PFA Barrel Spray Chamber with Endcap (N8142000) PFA-ST Nebulizer (N8122192) 1.8 mm I.D.…

  • Sampling And Skimmer Cone Supplies

    Agilent Technologies

  • Glass Water-Cooled Baffled Cyclonic Spray Chamber with Gas Port for ELAN DRC…

    PerkinElmer

    The water-cooled design permits the introduction of coolant for temperature control. Thermostatting to constant temperature helps ensure highly reproducible results and long term stability. Can also be cooled to suppress volatilization, allowing the direct aspiration of highly volatile solvents…

  • Ion Lens System Components

    Agilent Technologies

  • Glass 0.4 mL/min MicroMist Nebulizer for ELAN 5000/6x00/9000/DRCs/NexION 300/350…

    PerkinElmer

    The MicroMist micro-uptake glass concentric nebulizer offers high performance for limited sample volumes. MicroMists with sample uptakes 0.2 – 0.4 mL/min are fitted with a UniFit connector with 1.3 O.D. x 0.50 mm I.D. x 700 mm long sample tubing. MicroMists with sample uptakes 0.05 – 0.1 mL/min are…

  • Spray Chambers

    Agilent Technologies

    Agilent provides a range of spray chambers and high quality accessories for effective and consistent use of ICP-MS systems in various applications.

  • Hydride Generation Accessory Supplies

    Agilent Technologies

  • Miscellaneous Supplies

    Agilent Technologies

  • PC3 Peltier Cyclonic Spray Chamber Cooler for Optima 2x00/3x00/4x00/5x00/7x00 DV…

    PerkinElmer

    The PC 3 is a small, robust Peltier cooled cyclonic spray chamber. The PC 3 offers the advantages of low memory effects, constant temperature, fast rinse-out, and high sample transport efficiency. The cooled outer walls of the PC 3 spray chamber enhance long-term signal stability, reduce…

  • Connectors

    Agilent Technologies

  • Fixed 1.0 mm I.D. Injector Quartz Torch (Triple Blue Mark) for NexION 1000/2000

    PerkinElmer

    This one-piece quartz torch, marked triple blue, with a PVDF o-ring free holder, has a 1.0 mm I.D. injector integrated directly into the torch. The torch is an economical solution for many non-HF applications and ideal for organic solvent analysis.

  • Adapter Tubing GemTip Nebulizer

    PerkinElmer

    Used to connect capillary tubing (Product Number: 09908265) to Cross-flow nebulizers, and to larger i.d. peristaltic pump tubing.

  • PFA MicroFlow High Solids Nebulizer

    PerkinElmer

    PFA MicroFlow High Solids Large bore Teflon nebulizer for PE Elan.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.