HPLC

Compare Tool

Select up to 3 products

1 - 32 of 313
Sort
View
Show
  • Deuterium Lamps

    Varsal

    2000+ hour long life Consistent intensity over time High signal stability

  • Opti-Cap GL-45 Bottle Tops

    Restek

    The most economical way to helium-sparge and deliver LC mobile phases. Opti-Cap tops fit all standard GL-45 bottles and have two 1/8" holes and one 1/16" hole for tubing. All three openings are designed for threaded PEEK plugs.

  • Eco-Cap Bottle Top, ETFE

    Restek

    Fits all standard GL-45 bottles; has two 1/8-inch holes and one 1/16-inch hole for tubing. Holes are not threaded.

  • Solvent Filters for G1311/12/54A Pumps

    Agilent Technologies

    Unfiltered solvents or solvents contaminated with microbial growth can clog solvent inlet filters, reducing the lifetime of the filter and impacting pump performance. Remember to clean or replace the solvent inlet filters at least once every 3 months.

  • Solvent Inlet Filters

    Thermo Scientific

    For HPLC Systems Stainless steel 10µm inlet filters for longer lifetime No tools required for replacement Bottom-of-the-Bottle solvent filters: Efficient draw 100% PTFE polymer, including 2µm filter Built-in helium sparge port and frit

  • Waste Overflow Indicator for LC Systems

    Restek

    The Restek waste overflow indicator will help keep your mobile phase waste where it belongs—in the waste container! Compact, battery-operated unit fits securely on solvent bottles and accommodates two waste streams. An audible alarm is given as the solvent waste container approaches capacity,…

  • LC Stainless Steel Capillary Tubing

    Restek

    Whether you need to replace system tubing as part of your troubleshooting or want to reduce the dwell volume of your system as you move to narrower columns, Restek has the quality tubing in the lengths and IDs you need. Each ID is color coded, so it is easy to identify and replace correctly. Tubing…

  • Clean-Cut Tubing Cutter

    Restek

    Burr-free, perpendicular cuts that will not distort the tubing OD or close the ID Use on PEEK, PTFE, Tefzel, and other polymeric tubing

  • Last Drop Filter

    Restek

    The flat filter element sits parallel to the bottom of the mobile phase reservoir, allowing the filter to draw 98% of the mobile phase without drawing air into the system. Conventional cylindrical mobile phase filters begin to draw air into the system when approximately 10% of the solvent remains…

  • 1/4" HPLC Frits

    Restek

    We manufacture our frits from fine, chromatographic-grade 316 stainless steel, and we offer sizes to fit most column and pore sizes. To choose the correct frit, check its pore size compatibility with the particle size of the packing in the column. If the packing has a smaller particle size than the…

  • Upchurch PEEK Fingertight Fitting nut and ferrule 10-32

    MilliporeSigma

    Material: PEEK nut and ferrule Packaging: pkg of 10 ea I.D.:  0.0625 in. (1.5875 mm) Fitting:  nut and ferrule 10-32 General description The one-piece fitting, 55067-U, is convenient to use because the ferrule will not stick in a receiving port and can be easliy…

  • Diode Array Detector (DAD)/Multiple Wavelength Detector (MWD)

    Agilent Technologies

    Agilent's certified lamps are manufactured under ISO 9001 certified environment and are fully traceable through out every step of the production process. Each lamp is then tested to ensure it meets Agilent's specifications for performance. Test equipment is regularly calibrated using…

  • CHROMOLITH HIGHRESOLUTION RP-18E 100-4.6 MM

    MilliporeSigma

  • Bluestem Glass Solvent Filter

    Restek

    Prevent the particulates and microbial growth in your LC solvents from entering your instrument with the new Restek Bluestem glass solvent filter. Restek Bluestem glass solvent filter provides clean mobile phase to extend the life of columns and pump seals 15 µm borosilicate glass…

  • Hub-Cap Filter Kit

    Restek

    Kit includes: bottle adaptor, bottle adaptor nut, filter inlet cap, grid support, vacuum hose barb, tube compression fitting, 47 mm grid, 47 mm 0.22 µm filter membrane, 47 mm 0.45 µm filter membrane, 1/4" OD x 1/8" ID ultra chemical resistant, FEP-lined Tygon tubing (3'),…

  • Fittings and Ferrules for 1/8" Tubing

    Restek

  • Universal Sealing Mats

    Restek

    Protect contents and prevent carryover with pre-slit cap mats Chemically resistant, silicone mats are excellent for compound storage to -80°C Pre-slit mats pierceable by autosampler needle, pipette tip, or probe Universal mat for sealing 0.45, 1.3, and 2.0 mL plates

  • HPLC Detector Lamps

    Agilent Technologies

    Produced specifically to proprietary tolerances Reduced lamp-to-lamp variation Increased operating life Lamps for HPLC Detectors are produced using a new manufacturing process that results in more consistent operation characteristics. Lamps feature a more robust, more evenly…

  • Suction Filter for Shimadzu HPLC Systems

    Restek

  • Solvent Inlet Filter for Agilent HPLC Systems

    Restek

  • Outlet Cap & Gold Seal Assembly for Agilent HPLC Systems

    Restek

    Please note: Not compatible for use with Outlet Cap and Gold Seal Assembly Tool (cat.# 24989).

  • High-Pressure Frit-Type In-Line Filter

    Restek

    Restek’s high-pressure in-line filter is a stand-alone version of the Trident column protection system, specifically designed for ease of use, low dead-volume, and flexibility. The filter has a replaceable, PEEK encapsulated 316 stainless steel frit with a surface area of 12 mm 2 . The…

  • Low-Pressure Slip-On Inlet Filter for Mobile Phase Reservoir

    Restek

    A 316 stainless steel tip with a Tefzel collar seals to a corrosion-resistant 316 stainless steel filter element. The slip-on filter easily attaches to the pump inlet line, without the use of wrenches. The universal 1/8" OD tip accommodates standard PTFE tubing inner diameters. The cylindrical…

  • Detector Lamps for Agilent Instruments

    Thermo Scientific

    Low cost long-lasting deuterium lamps to fit most spectrophotometers and detectors. Thermo Brand Deuterium Lamps offer Best-in-Class spectral stability as well as superior lamp lifetime to insure that you get full value from each and every lamp. These lamps are engineered to be sure you get the…

  • PTFE Tubing

    Restek

    Ideal for mobile phase inlet lines Chemically inert Use to 500 psi (3,447 kPa) and 80°C

  • Hub-Cap Adaptors

    Restek

    Allow the use of the Opti-Cap Top with 4-liter solvent bottles.

  • ULTRA-WARE® Flat Bottom HPLC Reservoirs without Graduations

    DWK Life Sciences (Kimble)

    Designed for preparation, storage and delivery of all liquid chromatography mobile phases.  As part of our ULTRA-WARE® series, these reservoirs are recommended for use under vacuum for filtration and vacuum degassing of mobile phase solvents. Plastic safety-coating blocks UV light…

  • HPLC PEEK Performance Kit

    Restek

    This HPLC PEEK Performance Kit is a useful complement to your HPLC system. Includes: Hub-Cap Adapter w/ Cap (1) Tubing Clips (3) Clean Cut Tubing Cutter (1) PEEK Finger Tight Fittings (5) PEEK Column Plugs (5) PEEK 90° Tubing Elbows (2) PEEK 180° Tubing Elbows…

  • PEEK Union Connector

    Restek

    Quickly and reliably connect two pieces of 1/16" tubing. 0.3 mm union bore. End fittings included.

  • 1/16" Stainless Steel Ferrule

    Restek

  • Capillary Stainless Steel Tubing Assemblies for Agilent HPLC Systems

    Restek

    Precut, micropolished tubing and preseated fittings for quick, easy maintenance of your Agilent HPLC systems Meet or exceed manufacturer's performance.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.