Fume Hoods, Enclosures, and Biosafety Cabinets

Compare Tool

Select up to 3 products

HomeAll Products

INSTOCK Labs Hoods Chemical Fume Hoods Fume Hoods, Enclosures, and Biosafety Cabinets

1 - 24 of 24
Sort
View
Show
  • Isolator³ Bench Top Fume Hoods

    INSTOCK Labs

    Isolator 3 Bench Top Fume Hood is a safe and superior operating environment without the need for additional components to add or inject air into the hood chamber. By controlling baffle pressurization, Isolator 3 achieves the proper capture and containment at a 60 FPM face velocity. Additionall,…

  • Exhaust Snorkels

    INSTOCK Labs

    The Original Model is a robust and reliable all-around arm for general applications where there is a little risk of electrical discharges or attack by aggressive chemicals. The ESD/EX Model is designed for use in electronic environments where there is a risk of electrostatic discharges.…

  • Hoods for Exhaust Snorkels

    INSTOCK Labs

    Nederman Arms are supplied with a mini hood as standard - no extra extraction nozzle is required. The mini hood is also a universal interface for connecting to other hoods. A larger metal hood or transparent multipurpose hood can be attached directly to the mini hood, irrespective of arm size. The…

  • Fume Hood Fans

    INSTOCK Labs

    The GES Series Compact Sirocco Fan is made of an injected FRPP mold with standardized central discharge. The impeller and casing are both made of an injected FRPP mold for enhanced recycleability. All units standardly feature: Belt driven forward inclined impellers Carbon steel drive…

  • Adjustable Height Fume Hood Ceilling Enclosures

    INSTOCK Labs

    These three sided ceiling enclosures are designed to fill the space between the top of the hood and the ceiling up to 24" in height to provide a clean finished appearance. The enclosure is cut to fit in the field and includes a slip to fit ceiling finish trim angle. 2017 INSTOCK…

  • Isolator Gen-5 Walk-In Fume Hoods

    INSTOCK Labs

    The Isolator Gen-5 bypass walk-in fume hood with the frameless vertical sash is similar to the bench style unit in design and function. The top view-pass is clear tempered glass. These units are normally used with tall equipment setups where maximum clarity of vision is a priority. When floor…

  • PVC Superduct Pipes

    INSTOCK Labs

    PVC Superduct pipe is constructed of Type I Grade I PVC, Celle Class 12454B, as described in ASTM D-1784 with flame spread <10. A Female Duct Coupling is required to join two sections. Connections can be made using solvent cement. PVC is rigid and can be cut with out the use of special tools. …

  • Zero Pressure Weathercaps

    INSTOCK Labs

    The Zero Pressure Weathercap is made of strong corrosion-resistant PVC. The cap adds little static pressure to the exhaust system and allows for vertical discharge of the effluent air for dispersion away from the building. Includes transition to fan. 2017 INSTOCK Laboratory Furnishings Catalog

  • Duct Couplings, Female/Female

    INSTOCK Labs

    PVC coupling makes connections between two sections of PVC Superduct Pipe quick and easy. 2017 INSTOCK Laboratory Furnishings Catalog

  • Flexible Duct Connections

    INSTOCK Labs

    This connection reduces vibration between the blower and PVC Superduct pipe. Supplied with two clamps for easy installations. 25' length. 2017 INSTOCK Laboratory Furnishings Catalog

  • Auto Sash Operator and Controllers

    INSTOCK Labs

    TEL's innovative fume hood auto sash controller can be retrofitted to any fume hood and control system to maximize energy savings and provide increased safety for the operator. The auto sash controll is designed to close the sash of vertically rising sash fume hoods automatically when the…

  • Cold Water Fittings for INSTOCK Fume Hoods

    INSTOCK Labs

    These WaterSaver brand remote control fittings consist of a brass angle valve with a replaceable seat, an epoxy coated brass nylon color-coded panel flange with angle serrated hose connector, a remost control rod assembly with a plastic flange and a tank nipple, locknut and washer. Fittings may be…

  • VAV Controllers

    INSTOCK Labs

    TEL's Fume Hood Controller is pioneering the VAV airflow controller, monitor and alrm system developed to ensure the safety of users and provide energy efficiet fume hood operation. The Fume Hood controller can directly provide controlled outputs for VFD fan speed control or be supplied with a…

  • Manual Duct Dampers

    INSTOCK Labs

    PVC Superduct pipe fittings allow you to balance airflow. It is highly recommended for use in hood ventilation systems. 2017 INSTOCK Laboratory Furnishings Catalog

  • Fume Hood Alarm

    INSTOCK Labs

    Each fume hood is fully pre-punched, for the fast and easy installation of this alarm. The TEL AFA-1000 provides a digital readout of the fume hood face velocity and sounds an alarm when the airflow falls below safe levels. Consisting of a thermostat sensor (mounted through the side wall of the…

  • PVC Superduct Pipe Elbows

    INSTOCK Labs

    PVC Superduct pipe elbows, both 135 and 90 are compatible with PVC Superduct pipe. Designed and engineered for quick installation and minimum pressure losses, they feature belled end connections to receive PVC ductwork directly. 2017 INSTOCK Laboratory Furnishings Catalog

  • Fume Hood Work Surfaces

    INSTOCK Labs

    Modified black epoxy resin work surfaces are dished to retain spills. They are available with or without drop in cup sink cutouts. 2017 INSTOCK Laboratory Furnishings Catalog

  • Fittings for INSTOCK Fume Hoods

    INSTOCK Labs

    These WaterSaver brand remote control fittings consist of a brass angle valve with a replaceable seat, an epoxy coated brass nylon color-coded panel flange with angle serrated hose connector, a remost control rod assembly with a plastic flange and a tank nipple, locknut and washer. Fittings may be…

  • Gravity Sash Stop

    INSTOCK Labs

    As a safety or energy conservation measure, a sash stop may be added to any of our hoods. It may be mounted at any distance above the lower deflector vane to keep the sash from rising past that point. When needed, the stop may be pivoted out of the way. 2017 INSTOCK Laboratory Furnishings Catalog

  • Fan Blower Switch

    INSTOCK Labs

    Manual fan motor starter switch, toggle style, single pole, with red pilot light, stainless steel cover plate, 1 thermal unit, for 1HP or 2HP maximum motor size. 2017 INSTOCK Laboratory Furnishings Catalog

  • Thermoplastic Duct Reducers

    INSTOCK Labs

    PVC coupling type reducers are designed for connecting thermoplastic duct of different diameters. Compare your blower inlet size with your duct size to see if one is necessary. 2017 INSTOCK Laboratory Furnishings Catalog

  • T Connection

    INSTOCK Labs

    PVC fittings shaped in T configuration. Compatible with Thermoplastic duct. End connections receive PVC pipe directly. 2017 INSTOCK Laboratory Furnishings Catalog

  • External Vacuum Breaker

    INSTOCK Labs

    Shipped loose and installed in field. 2017 INSTOCK Laboratory Furnishings Catalog

  • Y Connections

    INSTOCK Labs

    PVC fittings shaped in Y configuration. Compatible with Thermoplastic duct. End connections receive PVC pipe directly. 2017 INSTOCK Laboratory Furnishings Catalog

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.