This closed system tissue homogenizer (tube with pestle) is non-sterile and packaged in a bulk pack configuration.

The 1600 MiniG® is the ideal solution for labs that want a compact yet powerful tissue homogenizer. This mechanical disruptor is designed to effectively disrupt cellular materials by oscillating one or two deep-well titer plates vertically. Clamp typically holds up to 6 x50 mL vials or 48 x 2…

Designed for low-volume applications, the SFX150 Sonifier® delivers up to 150 watts of power at 40 kHz for quiet operation. It’s the only cell disruptor and homogenizer of its type that includes a handheld converter designed for ergonomic comfort and easy control to simplify and speed…

Thomas No. 1204B80 Recommended for 0.5ml,1.5ml, and 2ml tubes Best used with sample volumes below 0.4ml Compatible with all homogenizer models Thomas No. 1204B81 Recommended for 1.5ml, 2ml, and 5ml tubes Volume of 0.4ml or above within 1.5ml tube Compatible…

Acid washed grinding beads are treated to remove fine particles and contaminants. Sold in package of 100.

The BioPulverizer reduces tissue hard-frozen in liquid nitrogen to a fine powder. Because of the high water content, most fresh tissue becomes as brittle as glass at liquid nitrogen temperatures. A sharp blow with a hammer will shatter it into tiny pieces. Called freeze-fracturing or…

Stainless steel beads have a density of 7.9g/cc. They are used mostly for grinding leaves and seeds. They are made of Type 316 stainless steel - the most corrosion resistant available.

The Dounce tissue homogenizer was designed for disruption of whole cells leaving cell nuclei undamaged. Two pestles are supplied with each complete unit. Large pestle is used for the initial sample reduction. The small pestle is used to form the final homogenate. Designed primarily for cellular…

Speed control from 10,000 to 29,000rpm Interchangeable shafts, rotors & stators 6 position control dial Autoclavable stainless steel shafts 2 year manufacturer warranty The Scilogex D500 Homogenizer has a maximum speed of 29,000rpm and reduces processing time significantly. The smooth…

Generator probes for Omni Mixer, Macro, and MACRO ES Homogenizers Compatible with 3410B54 Macro ES, 3410B05 Mixer, and 3410B10 Macro homogenizers Enables open vessel mixing, or can be interchanged with Blade assembly in a sealed vessel Autoclavable or easily disassembled for cleaning…

Zirconia/Silica has a density of 3.7g/cc (50% more dense than glass - good for spores and most tissues). Beads are sold in one pound bottles.

Stand Dispersing Device (Ecoline), dispersing devices for budget conscious labs The sleek, sound-insulated casing conceals enough power to safely and quickly handle a variety of applications. Our broad range of dispersing aggregates cover the range from preparing samples to testing product…

The Precellys Evolution is the most efficient and flexible bead beating tissue homogenizer on the market. Thanks to its powerful 3D precession movement associated to a high energy motor (up to 10 000rpm) and an exclusive tube locking system, the Precellys Evolution can homogenize any sample from…

The Mini-Beadbeater-16 is a high-energy cell disrupter designed to handle four to sixteen samples at a time. The Mini-BeadBeater-16 disrupts microbial cells and plant and animal tissue by violently agitating four to sixteen 2 ml screw-cap microvials containing small glass, ceramic or steel beads…

Flexible and reproducible homogenization for various starting materials Efficient sample cooling during the whole preparation Broad portfolio of optional innuSPEED nucleic acid extraction kits and lysis tubes The SpeedMill PLUS is an efficient homogenization system for use with a…

The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements.

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

The Omni Macro-ES Programmable Homogenizer is a powerful 1800 watt programmable homogenizer that is compatible with a wide range of generator probes, blade assemblies and sealed containers to offer the perfect mix of dependability, versatility and power. The Omni Macro-ES is ideally suited for…

Samix Jar These jars provide an evaporation and contamination-free mixing vessel to enable a manufacturing process in an oxygen-reduced space. After mixing, the jars can be used to dispense into specific dispensing containers or directly to the patient. Samix Standard Blades …

Thomas No. 1204B62 Most versatile hand-held homogenizer unit Ideal for processing volumes from 0.03ml to 5L High-torque motor with a variable speed adjustment, 10000 to 30000 rpm Use hand-held or post mount to a stand The 115V PRO250 homogenizer unit is a perfect fit…

Adapter holds 24 x 2 mL Lysing Matrix tubes. Standard adapter supplied with the FastPrep-24™ Instrument. The ergonomic design of the adapter ensures an easy loading of Lysing Matrix tubes that remain securely sealed during the homogenization. It stands stable on the bench top and is commonly…

The T 25 easy clean control is a high-performance dispersing instrument with electronic speed control from 3,000 - 25,000 rpm for working volumes of 1 - 2,000 ml (H2O). The new tool S 25 EC-T-C-18G-ST allows temperature measurement and operation time detection through RFID. Device overheating is…

Thomas No. 1204B47 and 1204B48 Designed for homogenizing of multiple samples Open slotted tooth - ideal for soft to the toughest of tissue samples Long shaft - perfect for samples volumes within 1.5ml-50ml tubes No risk of cross contamination or need to clean a probe between…

Required to use Omni Tip™ Plastic Probes with Omni TH, µH, GLH and PDH.

The Potter-Elvehjem tissue homogenizer has a ground glass pestle and tube. They are suitable for processing tougher tissues such as connective tissue. Clearance between the pestle and tube is .004-.006. The Potter-Elvehjem ptfe pestle is suitable for softer tissue such as the brain or liver.…

The BioHomogenizer is a rotor-stator type tissue homogenizer designed to rapidly homogenize, disperse, and emulsify biological samples in aqueous media from 1 to 1000 ml. The BioHomogenizer includes both the motor and probe. The powerful 10,000 rpm motor is totally sealed and can be hand-held or…

The solid aluminum vial rack holds forty-eight 2ml vials. It is an important accessory for the MiniBeadbeater-96 bead mill. When temperature control of samples is a concern, the aluminum vial rack will keep the sample temperature at the desired temperature during the beadbeating process.

Feature Highlights: High speed powerful motor homogenizer Ideal for microbues or other container with sample size of 0.5-250ml Light weight and portable Autoclavable stainless steel probes Ideal for tissue of animal, bacteria, yeast, plant samples, etc.

Frosted polyethylene vial with screw-on polyethylene cap. The nominal outer diameter measures 1/2-inch x 2-inch long (12.7 mm x 50.8 mm). Holds one 3/8-inch (9.5 mm) stainless steel grinding ball (#2155). May be used with the Cryo-Block (#2663) and the vial holder (#2191). Grinding load per vial is…

CoolPrep™ 24 X 2 mL Adapter is a cryogenic adapter which allows simultaneous lysis of 24 x 2 mL samples. Based on passive temperature control technology, the CoolPrep™ adapter ensures an efficient cooling of the samples as dry-ice, placed into the moving tray is in direct contact with…

2 mL reinforced polypropylene, self standing microfuge tube with screw-on polyethylene cap. The nominal outer diameter measures 25/64-inch x 1 27/32-inch long (10 mm x 47 mm). Grinding load per tube 60-120 mg, mixing load 1 mL. Sold in package of 200. Vials can be filled and sealed individually…