Homogenizers

Compare Tool

Select up to 3 products

HomeAll Products

Homogenizers

1 - 32 of 116
Sort
View
Show
  • TH Tissue Homogenizers

    Omni

    The Omni TH is a powerful Tissue Homogenizer designed to handle a wide range of laboratory samples from 0.2 mL to 100 mL in volume. The TH can usually process a tissue sample in less than 30 seconds and is compatible with a wide variety of generator probes for flexibility in application…

  • Model 7000 Tissue Homoginizer

    Eberbach

    Model 7000 incorporates the 7085 stirrer as the drive unit for the tissue homogenizer. The unit is designed for use with Potter-Elvehjem style tissue grinders. A chuck holds pestles with shafts up to 3/8” in diameter. Speed varies from 30-625 rpm (max torque 96 oz-in). The standard unit is made…

  • PRO Quick Connect® Homogenizer Generators

    Pro Scientific

    Thomas No. 1204B80 Recommended for 0.5ml,1.5ml, and 2ml tubes Best used with sample volumes below 0.4ml Compatible with all homogenizer models Thomas No. 1204B81 Recommended for 1.5ml, 2ml, and 5ml tubes Volume of 0.4ml or above within 1.5ml tube Compatible…

  • Freezer/Mills

    SPEX SamplePrep

    The 6875D Freezer/Mill® is a high-throughput, dual chamber cryogenic grinder with a self-contained liquid nitrogen tub and insulated case. It is specifically designed for cryogenic grinding and pulverizing of tough and/or temperature sensitive samples immersed in liquid nitrogen. This mill…

  • PYREX® Ten Broeck Homogenizer

    Corning

    These 40mL capacity PYREX® homogenizers are designed for grinding small samples for pathological and biochemical work. The catch basin bulb has a 55mm outer diameter. Made in accordance with Federal Specification DD-T-363a. It may be used manually but is adaptable for use with a slow speed…

  • Bio-Gen PRO200® Laboratory Homogenizers

    Pro Scientific

    Small and powerful hand-held homogenizer unit. For processing within various tube sizes to small beakers High-torque motor with a variable speed adjustment, 5000 to 35000 rpm Use hand-held or post mount to a stand Offering plenty of power and useful features, the 115V Bio-Gen…

  • POLYTRON® PT 10/35 GT Homogenizers

    Kinematica

    Powerful stand-disperser (Ecoline), flexibile-use disperser PT 10-35 GT features high drive power and a sleek design. With its large reserve capacity, it can be used for sample with large volumes as easily as preparing samples with smal volumes. BENEFITS Ergonomics Easy…

  • Macro Homogenizer

    Omni

    The Omni Macro Homogenizer is a powerful 1800 watt homogenizer that is compatible with a wide range of generator probes, blade assemblies and sealed containers to offer the perfect mix of dependability, versatility and power. The Omni Macro is ideally suited for homogenizing, blending and creating…

  • PRO250® Laboratory Homogenizers

    Pro Scientific

    Thomas No. 1204B62 Most versatile hand-held homogenizer unit Ideal for processing volumes from 0.03ml to 5L High-torque motor with a variable speed adjustment, 10000 to 30000 rpm Use hand-held or post mount to a stand Optional use with a separate digital speed control box …

  • Tissue-Tearor

    Biospec

    Small sample laboratory mixer and homogenizer Stainless steel rotor-stator Handy and mobile High speed, powerful 5,000 to 30,000 rpm motor with speed control Achieve any combination of mixing, emulsification, shredding or chopping. Homogenization in less than 1/2 mL treatable…

  • Stainless Steel Beads

    Biospec

    Stainless steel beads have a density of 7.9g/cc. They are used mostly for grinding leaves and seeds. They are made of Type 316 stainless steel - the most corrosion resistant available.

  • CoolTeenPrep™ 6 x 15mL Adapter

    MP Biomedicals

    CoolTeenPrep™ 6 X 15 mL Adapter is a cryogenic adapter which allows simultaneous lysis of 6 x 15 mL samples. Based on passive temperature control technology, the CoolTeenPrep™ adapter ensures an efficient cooling of the samples as dry-ice, placed into the moving tray, is in direct…

  • Bead Ruptor 24 Cryo Cooling Unit

    Omni

    Cooling system to protect heat sensitive samples during homogenization The BR-Cryo Cooling Unit is compatible with the Bead Ruptor 24 and is designed to prevent the increase of sample temperature during the homogenization process. Friction generated through the bead milling process generates…

  • Leaf Tissue Punch

    Biospec

    The leaf tissue punch produces a single 1/4 inch dia. disc. The punch holds a standard snap-top or screw-top microvial in a position to receive the sample without further manipulation.

  • SpeedMill PLUS Homogenizer

    Analytik Jena

    Flexible and reproducible homogenization for various starting materials Efficient sample cooling during the whole preparation Broad portfolio of optional innuSPEED nucleic acid extraction kits and lysis tubes The SpeedMill PLUS is an efficient homogenization system for use with a…

  • Mini-Beadbeater-96

    Biospec

    The Mini-Beadbeater-96 is high-energy, high-throughput cell disrupter. In a single 1-3 minute batch run it handles up to 192 samples using a deep-well microplate format or 45 samples in 1.5 or 2 ml screw-cap microvials. In a busy day thousands of samples can be processed. The MiniBeadbeater-96…

  • Zirconia/Silica Beads

    Biospec

    Zirconia/Silica has a density of 3.7g/cc (50% more dense than glass - good for spores and most tissues). Beads are sold in one pound bottles.

  • MicroCryoCrusher

    Biospec

    A compact, low cost screw-press designed to pulverize 50-500mg of hard, brittle material such as bone or teeth. If fresh tissue is used, the sample is cooled in liquid nitrogen to make the tissue hard and brittle, inserted into in the pre-cooled pulverizer 'nut' and then crushed by manually…

  • BioMixer

    Biospec

    The BioMixer is a versatile high-speed blender/mixer. Designed for one-hand operation, the BioMixer can be used with any suitable beaker or vessel having at least a 2 inch opening. Three stainless steel attachments allow any combination of mixing, emulsifying, shredding or chopping. A grinding mill…

  • Generators for POLYTRON® Homogenizers

    Kinematica

    W Design: Used for fibrious, stringy or solid samples. Z Design: Used for hard and brittle material (ex. Sweet corn, grains, pills). X Design: Ultrafast crushing of tablets, coated pills, and suppositories **Sample Volume Range: min. 10. When using a vessel ø 22 mm / volume is…

  • BioPulverizer

    Biospec

    The BioPulverizer reduces tissue hard-frozen in liquid nitrogen to a fine powder. Because of the high water content, most fresh tissue becomes as brittle as glass at liquid nitrogen temperatures. A sharp blow with a hammer will shatter it into tiny pieces. Called freeze-fracturing or…

  • FastPrep®-24 Instrument

    MP Biomedicals

    Applications FastPrep™-24 is used to homogenize biological samples. FastPrep™-24 Instrument lyses thoroughly and quickly any tissues and cells and thus allows easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA. Product Description The…

  • Dispoable Generators for POLYTRON® Homogenizers

    Kinematica

    Used for where the required sterilization of stainless steel aggregates represents a significant time limitation.

  • Cryo-Cup Grinder

    Biospec

    The Cryo-Cup Grinder consists of a stainless steel, semicircular bowl (or mortar) imbedded in a double walled, insulating cup. Up to 5 grams of hard frozen tissue is placed in the mortar precooled to liq N2 temperature. Using the special hand-held pestle made of non-heat conducting plastic, the…

  • Generator Probes

    Omni

    Generator probes for Omni Mixer, Macro, and MACRO ES Homogenizers Compatible with 3410B54 Macro ES, 3410B05 Mixer, and 3410B10 Macro homogenizers Enables open vessel mixing, or can be interchanged with Blade assembly in a sealed vessel Autoclavable or easily disassembled for cleaning…

  • 12 x 15mL All-Metal TeenPrep™ Sample Holder

    MP Biomedicals

    Large scale sample holder with All-Metal construction. The TeenPrep All-Metal Adapter holds 12 x 15mL Lysing Matrix Tubes. This is the strongest FastPrep-24™ adapter, intended for the most difficult and long-lasting lysis applications. Due to its metal construction, it can be continuously run…

  • BioRotator-6 Mixer

    Biospec

    The BioRotator-6 is a compact, rotational mixer used for a wide variety of mixing needs. The mixing angle is fully adjustable and six mixing speeds are provided. When adjusted with the rotation axis of the motor in a horizontal position, a roller tube attachment (792E) permits hybridization and…

  • T 25 easy clean control Dispersers

    IKA Works

    The T 25 easy clean control is a high-performance dispersing instrument with electronic speed control from 3,000 - 25,000 rpm for working volumes of 1 - 2,000 ml (H2O). The new tool S 25 EC-T-C-18G-ST allows temperature measurement and operation time detection through RFID. Device overheating is…

  • TeenPrep™ 12 x 15mL Adapter

    MP Biomedicals

    Medium-size adapter that holds 12 x 15 mL Lysing Matrix tubes. It allows frozen samples in Lysing Matrix tubes loaded in the adapter and stored at -20°C or -80°C are ready to be immediately processed with minimal hands-on manipulation, preventing degradation of cellular components by…

  • MicroMincer

    Biospec

    The MicroMincer is a compact, hand-operated screw press which macerates 0.3 grams or less of soft fresh plant or animal tissue (e.g. muscle, liver, brain, epicotyl and pulpy leaf tissue) without sample loss, heat generation, foaming or aerosol problems. Much of the sample, without added buffer, is…

  • Dispersing Elements for T 18 Basic

    IKA Works

    Thomas Nos. 1203C35 and 1203C35 The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of…

  • Dispersing Elements for T 10 Basic

    IKA Works

    ST tools are recommended for use with tissue and other fibrous materials Saw tooth design creates a cutting and tearing action for shredding fibrous materials Made of high quality stainless steel  

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.