Heaters

Compare Tool

Select up to 3 products

1 - 32 of 58
Sort
View
Show
  • Product Highlights Suitable for large range of surfaces like tanks, hoppers, conveyors, silos, etc. Exceptional durability Easy-to-apply industrial strength pressure sensitive adhesive backing option Grounded heating element meets NEC 427.23 Optional high-limit…

  • Objective Heater®

    Bioptechs

    The Bioptechs Objective Heater is a system specifically designed to safely and accurately warm the objective of a microscope to prevent heat loss from the specimen when using immersion lenses. There are two main components, are the electronic controller and the objective heating attachment. The…

  • Product Highlights Suitable for a large range of surfaces like tanks, hoppers, conveyors, silos, etc. SRL Series: Ideal for metal surfaces Exceptional durability and longevity Patented grounded heating element for your safety meets NEC 427.23 Optional high-limit thermostat to…

  • Tall, heavy-walled glass vessels coated with Instatherm® to accommodate larger and taller vessels. A thermocouple well is imbedded in the insulation. Designed to operate at up to 250 degrees C. Do not run dry or above max voltage. Bare, flat bottom suitable for use with magnetic stirrers. All…

  • Product Highlights Provides Even Heat for Griffin and Standard Beaker Heating Applications Removable with VELCRO®-like Closure. Easy-Access to Graduation Moisture and Chemical Resistant. No Need to Worry About Spills Specifications Maximum exposure…

  • Digital Block 3 Heater

    Techne (Cole-Parmer)

    Choice of 130°C or 200°C maximum temperature Three block capacity Digital setting and display Uniform and stable temperatures Designed for the precise heating of test-tubes, micro centrifuge tubes and cuvettes and microtitre plates. The bright, easy to read LED…

  • Flexi-Therm Dry Block Heater

    Vitl Life Science Solutions

    It's time for a new generation of dry block heater You shouldn’t have to waste time making sure that your samples are being heated to the temperature that your block heater says they are. You shouldn’t have to put tin foil over your consumables to make sure the heat…

  • Low form glass vessels heated by Instatherm® similar to 9601's, except these have a permanently attached 12' PTFE covered power cord with 2-prong plug for direct insertion into controllers. Power cord cannot be removed from the bath accidently or on purpose, thus avoiding a possible hazardous…

  • Product Highlights Easy-to-install with precise fit Double-seal technology Built-in pressure sensitive adhesive Built-in PVC overlap tape with acrylic adhesive Scrim reinforcement on the seam surface Environmental-friendly, CFC-free, flexible elastomeric thermal insulation …

  • Product Highlights Built-in temperature control: plug-and-play Suitable for large range of surfaces like tanks, hoppers, conveyors, silos, etc. SRP Series: Ideal for plastic surfaces Easy-to-apply industrial strength pressure sensitive adhesive backing option Specifications: …

  • Across International's IHL series 1 kHz to 20 kHz low frequency induction heaters are good for a wide range of applications including deep heat penetration for full hardening processes, steel rod forging, tempering of pressing dies, pre-heating for welding, and melting of metal batches over 4…

  • Product Highlights Exclusive hazardous-area approval Suitable for a large range of surfaces like tanks, hoppers, conveyors, silos, etc. Exceptional durability Moisture and chemical resistant Easy-to-apply industrial strength pressure sensitive adhesive backing option Patented…

  • Product Highlights Built-in temperature control: plug-and-play Suitable for large range of surfaces like tanks, hoppers, conveyors, silos, etc. SRL Series: Ideal for metal surfaces  Specifications: Power densities: SRL series: 2.5 watts/in 2 (.003 watts/mm 2…

  • Product Highlights Built-in temperature control: plug-and-play Suitable for large range of surfaces like tanks, hoppers, conveyors, silos, etc. SRL Series: Ideal for metal surfaces  Easy-to-apply industrial strength pressure sensitive adhesive backing option …

  • Product Highlights Extra-wide 4" (102mm) heater coverage Excellent solution for a wide range of poly and metal drum applications Extra long service life: Excellent strength and durability Patented grounded heating element meets NEC 427.23 Easy adjustable thermostat control…

  • Product Highlights Extra-wide 4" (102mm) heater coverage Excellent solution for a wide range of poly and metal drum applications Extra long service life: Excellent strength and durability Patented grounded heating element meets NEC 427.23 Easy adjustable thermostat control…

  • Across International IH series mid-frequency induction heaters are designed to operate between 30 and 80 kHz. Mid-frequency heaters are excellent for small parts heating, cutting, diamond tool brazing, soldering copper plumbing fittings, auto parts heat-treating, annealing of stainless steel…

  • Fits all 135mm diameter hot plate stirrers Great visibility of the reaction Excellent heat distribution User safety: PTFE shield prevents potential burns and provides a safe contact area Aluminum construction provides excellent heat transfer and does not interfere with magnetic field …

  • Product Highlights Built for heating in extreme cold conditions down to: -40°F (-40°C) Durable industrial grade 60% more wattage than typical 5w/ft rated self- regulating heating cable Ideal for freeze protection and thawing: metal or plastic pipes and valves. Can also be…

  • Across International's IHL series 1 kHz to 20 kHz low frequency induction heaters are good for a wide range of applications including deep heat penetration for full hardening processes, steel rod forging, tempering of pressing dies, pre-heating for welding, and melting of metal batches over 4…

  • BriskHeat® Full-Coverage Drum Heaters are designed to wrap around a drum and heat the contents while insulating to keep the heat exactly where it needs to be. Full-Coverage drum heaters combine the convenience of quick heat-up time and the precision of a digital controller to provide you with…

  • Instatherm® Griffin style beaker with pouring spout. Designed to operate at up to 250 degrees C. Do not run dry or above max voltage. degrees per minute), with very low thermal lag. The bottom is uncoated Bare, flat bottom suitable for use with magnetic stirrers. All baths include a connecting…

  • Ideal for heating liquids of all types in laboratory and industrial use Heating element is polished Type 316 stainless steel Design permits hanging over edge of vessel Elements are contained in coil section to concentrate heat at bottom of vessel Risers are unheated; 1,500 watts, 115 volts …

  • HTC Heating Cords

    BriskHeat

    Product Highlights Designed for use on small tubes, vessels, or any application where space is limited Can be wrapped around objects as small as 1/8" (3mm) diameter Exceptional flexibility Rapid thermal response Exceptional durability: excellent for laboratory, production,…

  • Hi-Frequency Induction Heaters

    Across International

    IHG series 100 kHz to 1100 kHz high frequency induction heaters are among the latest products developed by Across International. They can quickly heat most metals that other frequencies can not heat efficiently, like aluminum and metal powders. And uniquely they can heat parts from a distance.…

  • IHG series 100 kHz to 1100 kHz high frequency induction heaters are among the latest products developed by Across International. They can quickly heat most metals that other frequencies can not heat efficiently, like aluminum and metal powders. And uniquely they can heat parts from a distance.…

  • IHG series 100 kHz to 1100 kHz high frequency induction heaters are among the latest products developed by Across International. They can quickly heat most metals that other frequencies can not heat efficiently, like aluminum and metal powders. And uniquely they can heat parts from a distance.…

  • DigiTrol II

    Glas-Col

    The DigiTrol II uses a 1/16 DIN microprocessor-based, user-selectable control mode temperature control. The control features a digital dual output display set point and process temperature indication. The automatic-tuning feature ensures increased temperature accuracy with minimum overshoot. Easy…

  • High Temp Premium TGA/DSC

    Mettler Toledo

    Premium high temperature automated TGA/DSC that has a temperature range up to 1600°C. Includes a 7 place ultra-microgram balance.

  • Digital Dual Control Block Heater

    Techne (Cole-Parmer)

    Two blocks with independent temperature control 130°C or 200°C maximum temperature Digital setting and display Uniform and stable temperatures Innovative design accommodating 2 blocks with independent temperature control allowing them to be set at different temperatures. The two…

  • With thermostat In tubular, stainless steel sheath, 8 mm diameter Thermostat has adjustment dial with reference scale 0 to 11 in 60 divisions; stainless steel probe is protected by heating element configuration Pilot light indicates when unit is heating Thermostat housing is 70 mm…

  • IH series mid-frequency induction heaters are designed to operate between 30 and 80 kHz. Mid-frequency heaters are excellent for small parts heating, cutting, diamond tool brazing, soldering copper plumbing fittings, auto parts heat-treating, annealing of stainless steel containers and more. …

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.