Product Highlights Suitable for a large range of surfaces like tanks, hoppers, conveyors, silos, etc. SRP Series: Ideal for plastic surfaces Exceptional durability and longevity Patented grounded heating element for your safety meets NEC 427.23 Optional high-limit thermostat to…

Ideal for heating liquids of all types in laboratory and industrial use Heating element is polished Type 316 stainless steel Design permits hanging over edge of vessel Elements are contained in coil section to concentrate heat at bottom of vessel Risers are unheated; 1,500 watts,…

Economical and dependable. These mantles have a ceramic heat cavity (resistance wire completely embedded), a grounded metal housing for safer operation, a low profile that permits magnetic stirring, and can be operated at up to 550 C. May be used as an air or sand bath. All models have a 36 in.,…

Analogue control Economical price 130°C maximum temperature Hot warning light to warn that the blocks are too hot to touch Uniform and stable temperatures Robust construction with simple analogue setting of temperature. The 'Hot' warning light will flash whenever the block…

With thermostat In tubular, stainless steel sheath, 8 mm diameter Thermostat has adjustment dial with reference scale 0 to 11 in 60 divisions; stainless steel probe is protected by heating element configuration Pilot light indicates when unit is heating Thermostat housing is 70 mm…

IKA® ETS-D5 Electronic Contact Thermometer •Electronic contact thermometer with 3 operating modes •With optimized PID control •RESET function •Incl. stainless steel sensor H 62 •For all magnetic stirrers with contact thermometer bushing according to DIN 12878, class 2 e.g. IKA, Heidolph and…

Product Highlights Suitable for large range of surfaces like tanks, hoppers, conveyors, silos, etc. Exceptional durability Easy-to-apply industrial strength pressure sensitive adhesive backing option Grounded heating element meets NEC 427.23 Optional high-limit…

High Temp DSC with Sample Robot Air cooled DSC with sample robot. This DSC utilizes ceramic sensor with 56 thermocouples guaranteeing outstanding resolution and sensitivity. High Temp DSC (Intracooled) DSC with intracooler option that expands the temp. range, -85 to 700°C. 56…

Product Highlights Easy-to-install with precise fit Double-seal technology Built-in pressure sensitive adhesive Built-in PVC overlap tape with acrylic adhesive Scrim reinforcement on the seam surface Environmental-friendly, CFC-free, flexible elastomeric thermal insulation …

IHG series 100 kHz to 1100 kHz high frequency induction heaters are among the latest products developed by Across International. They can quickly heat most metals that other frequencies can not heat efficiently, like aluminum and metal powders. And uniquely they can heat parts from a distance.…

Product Highlights Built-in temperature control: plug-and-play Suitable for large range of surfaces like tanks, hoppers, conveyors, silos, etc. SRP Series: Ideal for plastic surfaces Specifications: Power densities: SRP series: 1.25 watts/in 2 (.002 watts/mm 2 ) …

Product Highlights Extra-wide 4" (102mm) heater coverage Excellent solution for a wide range of poly and metal drum applications Extra long service life: Excellent strength and durability Patented grounded heating element meets NEC 427.23 Easy adjustable thermostat control…

The Bioptechs Objective Heater is a system specifically designed to safely and accurately warm the objective of a microscope to prevent heat loss from the specimen when using immersion lenses. There are two main components, are the electronic controller and the objective heating attachment. The…

Economical and dependable. These mantles have a ceramic heat cavity (resistance wire completely embedded), a grounded metal housing for safer operation, a low profile that permits magnetic stirring, and can be operated at up to 550 C. May be used as an air or sand bath. All models have a 36 in.,…

Product Highlights Designed for use on small tubes, vessels, or any application where space is limited Can be wrapped around objects as small as 1/8" (3mm) diameter Exceptional flexibility Rapid thermal response Exceptional durability: excellent for laboratory, production,…

Stainless steel support rod for all magnetic stirrers with M 10 threaded bushing. Legal Information: IKA is a registered trademark of IKA-Werke GmbH & Co. KG

Product Highlights Speed up the flow of slow moving and uncooperative contents such as honey, molasses, lube oil, and more! Wrap-around blanket design allows you to heat a tote tank / IBC from the outside Designed for caged, plastic, or metal tote tanks / Intermediate Bulk…

Adapters for the Ther-Mix and Flexi-Therm Vitl offers a range of interchangeable intelligent Heated Modules, used as adapters for the Flexi-Therm dry block heater and Ther-Mix heated laboratory mixer. Our Heated modules are a more efficient and accurate method of sample heating.…

Tall, heavy-walled glass vessels coated with Instatherm® to accommodate larger and taller vessels. A thermocouple well is imbedded in the insulation. Designed to operate at up to 250 degrees C. Do not run dry or above max voltage. Bare, flat bottom suitable for use with magnetic stirrers. All…

Labworldsoft 6 Visc software enables the automation of laboratory processes by connecting ROTAVISC viscometers to other devices, such as a thermostat, through a PC. Measurement processes and parameters can thus be easily recorded for analysis and documentation. In addition, users can e.g. monitor…

Product Highlights Suitable for hazardous-area environments Ideal for heat tracing, freeze protection, and process maintenance applications Bulb and capillary surface temperature control or ambient sensing Numerous temperature range choices to fit your application …

Across International IH series mid-frequency induction heaters are designed to operate between 30 and 80 kHz. Mid-frequency heaters are excellent for small parts heating, cutting, diamond tool brazing, soldering copper plumbing fittings, auto parts heat-treating, annealing of stainless steel…

Ideal for Pressure Transmitters, Pumps, Gauges, Manifolds & More Creates a pocket of warmth to protect devices against extreme cold For use in all weather, sub-freezing environments Universal sizes for a wide range of objects Plug-and-play with extra-long 16 ft (5 m) power cord …

Premium automated TGA/DSC with large furnace that has a temperature range up to 1100°C. Includes a 6 place microgram balance from the worldwide leader. Mettler products are intended for sale/shipment within the US only. International customers should contact their local Mettler…

IH series mid-frequency induction heaters are designed to operate between 30 and 80 kHz. Mid-frequency heaters are excellent for small parts heating, cutting, diamond tool brazing, soldering copper plumbing fittings, auto parts heat-treating, annealing of stainless steel containers and more. …

Across International's IHL series 1 kHz to 20 kHz low frequency induction heaters are good for a wide range of applications including deep heat penetration for full hardening processes, steel rod forging, tempering of pressing dies, pre-heating for welding, and melting of metal batches over 4…

Product Highlights Built-in temperature control: plug-and-play Suitable for large range of surfaces like tanks, hoppers, conveyors, silos, etc. SRL Series: Ideal for metal surfaces  Specifications: Power densities: SRL series: 2.5 watts/in 2 (.003 watts/mm 2…

Two blocks with independent temperature control 130°C or 200°C maximum temperature Digital setting and display Uniform and stable temperatures Innovative design accommodating 2 blocks with independent temperature control allowing them to be set at different temperatures. The two…

Across International's IHL series 1 kHz to 20 kHz low frequency induction heaters are good for a wide range of applications including deep heat penetration for full hardening processes, steel rod forging, tempering of pressing dies, pre-heating for welding, and melting of metal batches over 4…

High Temp Premium DSC with Sample Robot Premium air cooled DSC with sample robot. This DSC uses a ceramic sensor with 56 thermocouples guaranteeing outstanding resolution and sensitivity. High Temp Premium DSC with Sample Robot (Intracooled) Premium automated DSC with intracooler option…

It's time for a new generation of dry block heater You shouldn’t have to waste time making sure that your samples are being heated to the temperature that your block heater says they are. You shouldn’t have to put tin foil over your consumables to make sure the heat…

Note: For fastening ETS-D5 (Z645125) or ETS-D6 to the support rod H 16 V Legal Information: IKA is a registered trademark of IKA-Werke GmbH & Co. KG