Hand Protection

Compare Tool

Select up to 3 products

HomeAll Products

Ansell Hand Protection

1 - 32 of 41
Sort
View
Show

Mettler

  • 29-865 Neoprene® Chemical Protection Gloves

    Ansell

    Broad protection Provides excellent protection against abrasion, cuts, punctures and a wide range of chemicals Case hardened; chemically toughened to increase chemical and abrasion resistance over ordinary neoprene gloves Soft, cotton-flock lining which absorbs perspiration …

  • Sol-Vex® Solvent Resistant Gloves

    Ansell

    Unsupported, flock-lined nitrile glove Outstanding strength and chemical resistance Longer wear and better protection than other unsupported chemical-resistant gloves against abrasion, cuts, snaps and punctures Resistant to degradation; will not weaken or swell like rubber and neoprene in many…

  • 09-430 Scorpio® Neoprene Chemical Protection Gloves

    Ansell

    Top-of-the-range neoprene delivering excellent wide-ranging chemical protection Protects against a wide range of oils, acids, caustics, alcohols and many solvents Good resistance to all mechanical hazards Special Hi-Lo insulated gauntlet option with quilted cotton liner, for use in…

  • 43-216 ActivArmr® WorkGuard™ Heavy-Duty Special Purpose Gloves

    Ansell

    ActivArmr ®   WorkGuard™ 43-216 is a heavy-duty special purpose glove offering high levels of molten splash resistance. Ideal for many different applications requiring thermal protection, it also provides superior durability and good protection from cuts, punctures and abrasions. …

  • Clean Room Nitrile Gloves

    Ansell

    100% Nitrile for consistent cleanliness and quality in critical environments - clean room applications Low particulate and extractable ion levels, contains no plasticizers, silicone, pigment or powder -- provides greater product protection Two to three times more resistant to snags, punctures…

  • 58-735 AlphaTec® Chemical & Cut-Resistant Gloves

    Ansell

    AlphaTec® 58-735 is engineered for workers who need protection against cut, the #1 desired improvement in chemical gloves.  Nitrile barrier provides advanced chemical protection from many frequently used chemicals. Engineered for workers who need protection against cut, the #1…

  • 02-100 Barrier® Flat Film Chemical Resistant Gloves

    Ansell

    Extreme resistance against a wide range of chemicals, including biological hazards Chemical resistant, 5 layer laminated glove Hand-specific and ergonomic design. Wide Spectrum Resistance. 100% inspected. Each glove is individually air-pressure tested. Industries …

  • 11-318 HyFlex® 18 Gauge Cut Resistance ESD Knitted Gloves

    Ansell

    Best in-class protection and performance with unmatched comfort A new ultra light design with medium cut performance from this new to the world cut resistant glove. Based on 18 gauge knit with Dyneema® Diamond, Spandex, Nylon and Carbon to provide ultimate tactility and flexibility.…

  • 37-145 Solvex® Solvent Resistant Nitrile Gloves

    Ansell

    Tactile, yet durable, this product provides a great comfort across a diverse range of applications Designed to deliver optimal results in wet or dry work environments where chemical resistance is crucial Fully reusable, with an unequaled abrasion resistance FDA Food Approved No…

  • 11-840 HyFlex® Light Duty FORTIX™ Gray Foam Nitrile Gloves

    Ansell

    Extreme durability and superior fit for precision handling in abrasive applications The tough 1.1 mm FORTIX® nitrile foam coating (patent pending) offers EN Abrasion Level 4 protection, with up to three times the abrasion performance of other lightweight, knit-dipped gloves The…

  • 11-735 HyFlex® Palm Dipped Medium Duty, 10 Gauge Gloves with INTERCEPT™…

    Ansell

    Excellent Flexibility and Fit with High Levels of Cut Protection The 11-735 features a 10G lightweight liner with INTERCEPT™ Technology yarns that provide EN Cut Level 5 (ANSI Level 4) protection for the ultimate in cut resistance. The comfortable and flexible plaited liner also…

  • 42-325 Crusader® Flex Gloves

    Ansell

    Superior heat resistance with complete protection for hand and wrist Non-woven felt insulation and a full-length heat barrier designed for intermittent handling of objects up to 400ºF Two-piece construction eliminates outseams for better finger comfort, dexterity and flexibility …

  • 97-123 ActivArmr® Gray Hi Viz Bumpers Cut-Resistant Gloves

    Ansell

    The ActivArmr 97-123 Glove styles offers Certified Impact protection in accordance with EN 388:2016;  Cut Resistant – providing EN388:2016 level 3/A and ANSI A2;  PU dip provides excellent grip and dexterity. 15 gauge seamless knit HPPE glove keep hands cool and comfortable. …

  • 11-644 HyFlex® Light Duty Gray Polyurethane Gloves

    Ansell

    Safety, durability and comfort combined No other glove offers the dynamic mix of protection, durability and comfort of the HyFlex® 11-644 glove. The ANSI Level 2 cut protection and lightweight ergonomic fit strike the perfect balance of protection and precision when working with small,…

  • 11-541 HyFlex® Palm Dipped Gloves with INTERCEPT™ Technology and ANSELL GRIP…

    Ansell

    Exceptional cut protection in a form-fitting ultralight weight glove with enhanced grip performance The 11-541 epitomizes the convergence of protection and performance. It features an 18G ultralight weight liner with INTERCEPT™ Technology yarns that provides ANSI CUT Level 4 / EN CUT…

  • 91-225 Accutech® Sterile Natural Rubber Latex Gloves (Textured Fingertips)

    Ansell

    These sterile, hand-specific Natural Rubber Latex Gloves are made from ergonomically designed formers. They offer a high level of agility required in specific applications, and ensure a very comfortable fit. Thanks to the low latex protein content, which is less than 50 µG / gm of polymer,…

  • 73-701 TouchNTuff® DermaShield® Sterile Disposable Neoprene Gloves

    Ansell

    Sterile Disposable Neoprene Glove with Low Allergy Potential TouchNTuff® Dermashield® 73-701 is the ideal glove for workers in aseptic environments who are concerned about allergy risks. Its proprietary material formation is free of latex proteins and accelerators that can cause…

  • 11-818 HyFlex® Light Duty FORTIX™ Blue Foam Nitrile Gloves

    Ansell

    Barehand-like comfort and tactility with high durability Under abrasive conditions the ultra-thin FORTIX™ nitrile foam coating (patent pending) lasts up to three times longer than comparable coatings, extending glove life and reducing total cost of ownership The FORTIX™…

  • 15-554 PVA® Chemical-Resistant Industrial Gloves

    Ansell

    The Ansell PVA 15-554 Polyvinyl alcohol coating out-performs most other types of chemical-resistant gloves. One of the only gloves suitable for handling strong organic solvents Virtually inert in aromatic and chlorinated solvents Comfortable anatomical glove with pre-curved fingers…

  • 11-531 HyFlex® Palm Dipped Light Duty Gloves with INTERCEPT™ Technology and…

    Ansell

    Exceptional grip performance and in a comfortable ultralight weight cut resistant glove. The 11-531 epitomizes the convergence of protection and performance. It features an 18G ultralight weight liner with INTERCEPT™ Technology yarns that provides EN Cut Level 3 protection. The liner…

  • 11-250/11-251 HyFlex® Sleeves with INTERCEPT™ Technology

    Ansell

    Best-in-class protection with unmatched comfort INTERCEPT™ Cut Resistance Technology provides best-in-class cut protection and a soft and cool feel to the worker The seamless design and the options of lengths and widths ensure an excellent fit and makes it the #1 choice for…

  • 11-550 HyFlex® Medium Duty Cut-Protection Gloves

    Ansell

    Longer lasting cut protection with INTERCEPT™ Technology High comfort cut protection with up to 75% more durability* Well-suited for a broad range of assembly applications Designed for dry or slightly oily applications where workers need cut protection, and in some cases,…

  • 11-537 HyFlex® 3/4 Dipped Light Duty Gloves with INTERCEPT™ Technology and…

    Ansell

    Exceptional grip performance and 3/4 dip protection in a comfortable ultralight weight cut resistant glove The 11-537 epitomizes the convergence of protection and performance. It features an 18G ultralight weight liner with INTERCEPT™ Technology yarns that provides EN Cut Level 3…

  • 11-931 HyFlex® Palm-Coated Cut-Resistant & Oil-Repellent Gloves

    Ansell

    The HyFlex 11-931 palm coated glove is the lightest weight cut resistant + oil-repellent glove to provide enhanced worker comfort & safety, with strategically reinforced ‘high wear’ regions for extended use life. RIPEL™ Oil repellent technology for maintaining dry…

  • 11-539 HyFlex® Fully Dipped Light Duty Gloves with INTERCEPT™ Technology and…

    Ansell

    Exceptional grip performance and fully coated protection in a comfortable ultralight weight cut resistant glove The 11-539 epitomizes the convergence of protection and performance. It features an 18G ultralight weight liner with INTERCEPT™ Technology yarns that provides EN Cut Level 3…

  • 87-208 Orange Heavyweight Natural Latex Rubber Gloves

    Ansell

    Heavy-duty chemical protection for the toughest applications 29 mil palm is 50% thicker than most standard flock-lined gloves Increased tensile strength and puncture/cut protection against chemical and physical hazards 100% cotton flock lining increases user comfort Recessed…

  • 11-724 HyFlex® Palm Dipped Medium Duty, 13 Gauge Gloves with INTERCEPT™…

    Ansell

    Excellent Flexibility and Fit with Optimal Cut Protection The 11-724 features a 13G lightweight liner with INTERCEPT™ Technology yarns that provides EN Cut Level 3 (ANSI Level 2) protection. The liner also features an optimized Lycra® content that is soft and cool on the skin for…

  • 11-727 HyFlex® Palm Dipped Medium Duty, 15 Gauge Gloves with INTERCEPT™…

    Ansell

    The 11-727 features a 15G lightweight liner with INTERCEPT™ Technology yarns that provide EN Cut Level 3 (ANSI Level 2) protection. The thin, ergonomic liner also features an optimized lycra content that is soft and cool on the skin for all-day comfort. The palm dipped polyurethane (PU)…

  • 11-800 HyFlex® Light Duty Gray Foam Nitrile Gloves

    Ansell

    The original reinvented. Ansell’s best-selling HyFlex® 11-800 glove, the original nitrile foam glove, is better than ever A highly versatile solution for precision assembly and general handling, it provides the perfect balance between comfort, dexterity and protection …

  • 11-518 HyFlex® Light Duty, Blue Polyurethane, Cut Resistant Gloves

    Ansell

    Ultralight duty cut resistant glove The first 18-gauge glove with EN Level 3 cut protection, and EN Level 3 abrasion protection for extended glove life Dyneema® Diamond Technology fiber and a thin PU coating bring a new degree of dexterity and tactility for applications with cut…

  • 11-925 HyFlex® Ultra-Light Weight Oil Repellent, Oil Grip Multi-Purpose Gloves

    Ansell

    HyFlex® 11-925 is first to market with an ULTRA-LIGHT WEIGHT solution which combines enhanced PROTECTION and PERFORMANCE to provide industrial workers with ultimate tactility across oily assembly applications without compromising their COMFORT. The first ultra-light weight HyFlex®…

  • 87-224 Chemi-Pro® Natural Rubber Latex & Neoprene Gloves

    Ansell

    Extra chemical protection and durability for more demanding applications Unique dipping process combines neoprene over natural rubber latex for increased protection against a wide range of chemicals 27 mils thick for extra ruggedness, durability and protection against physical hazards …

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.