Consists of piston-type Teflon® pestle with stainless steel shaft and replaceable grinding vessel of borosilicate glass Eliminates ground glass from homogenate; Teflon minimizes heat generated in use Completely autoclavable Precisely controlled grinding clearance Pestles and vessels…

Produces a relatively coarse homogenate For cellular work where the nucleus remains intact after homogenization All glass construction * Stated clearances for the tubes and pestles are “total” not “annular”.

Borosilicate Glass Finely ground pestle and tube Teflon® spacer aligns pestle and reduces aerosoling of product Matched sets

These hand-driven PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Dounce homogenizers are particularly useful in enzyme studies where heat build-up must be avoided. The internal diameter at the…

For rapid, high-speed grinding of small samples from 20 to 50ml. Stainless steel or hard-faced blade rotates at speeds up to 12,000 rpm to successfully grind bauxite, bone, ceramics, coal, Devarda’s alloy, fertilizer, filter paper, fly ash, frozen tissue, glass, grain, kaolinites, leaves,…

Grinds materials, by both impact and abrasion, that other grinders cannot Easy-to-use Very rapid grinding action Consistent particle size Air swept for easier cleaning and less thermal degradation USDA approved for NIR sample preparation Mill is designed for the rapid grinding of soft to…

This grinder has a serrated Teflon® pestle that disperses homogenate into the mortar cylinder more efficiently. These units are precisely constructed with completely interchangeable parts, allowing for easier replacement of parts so you don't need to keep pieces matched during cleaning.…

The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes even with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness. It s ubstitutes cumbersome hand mortars by a high performance drive with electronic…

The redesigned batch mill grinds hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. The development of the mill placed particular emphasis on safety. The mill…

Complete kit of six tissue grinders: 0.1, 0.2, 1, 1, 2, and 1 mL Packed in a lightweight protective carrying case Glass-to-glass ground surface homogenizes connective tissue. Teflon ® units suitable for soft tissue. Dounce Tissue Grinder is supplied with two interchangeable pestles for large…

Perfect Grind for the Perfect Pre-Roll! Designed to optimize grinding and extraction, the Revolution 2.0 commercial cannabis grinder delivers a consistent, homogenous grind, optimal for evenly packed rolls, extractions and higher potency of the product.  The Revolution 2.0 employs a low heat,…

Feature Highlights: Three choices: ACT-AG12000 (Fixed Speed 12,000rpm), ACT-AG1500 (Fixed Speed 1,500rpm), and ACT-AG3080 (Adjustable Speed 3,000-8,000rpm) Motor driven Rechargeable battery keeps working for 10 hours Ideal for re-suspending pellets or disrupting soft tissue in…

For grinding chemicals, drugs and gums, as well as heavier minerals in the dry state Distance between grinding plates is adjustable to vary fineness of the product Includes one set of removable grinding plates (3371J35) and toothed feed for dry material Capacity 1-10 lbs. per hour at…

Made of autoclavable CTFE/Stainless Steel Optional cordless drive unit available, see Thomas number 3411E25.

Process materials up to 9 Mohs Closed grinding chamber with Plexiglas window Timed or continuous operation Wet or dry grinding Mortar grinders reduce inorganic and organic substances to analytical fineness. They can mix and homogenize powders, suspensions and pastes. Grinders…

Biodegradable Plastic Cylinder Molds for single-use applications are non-absorptive and molded as single piece units for dimensional uniformity. Rugged molds have unlimited shelf life and are weather-resistant, but contain a unique additive that allows microbes present in landfills and composting…

Borosilicate glass With precision made interchangeable pestles and tubes Clearance between pestle and tube 0.1 - 0.15 mm Designed for hand operation, but can be slow-speed motor driven by inserting a rubber stopper and metal rod into pestle Hollow handle permits packing with…

Sand is specially graded natural silica sand graded to retain 98% on a No. 100 (150µ) sieve, 75% on a No. 50 (300µ) 30% on a No. 40 (425µ) and 2% on a No. 30 (600µ). Specific gravity is 2.65 Packed in 50 lbs. (22.7kg) bags

Stainless steel pestle with plastic knob at top, requires less effort than glass-tissue grinders Autoclavable Self-standing - mortar has flat bottom Single pestle and mortar supplied as a matched set 7, 15 and 40 mL

The Humboldt, Enclosed Model, Riffle-type Sample Splitter supports the following standards: ASTM C702, ASTM D410, ASTM D3013, ASTM D3176, ASTM D3180, AASHTO T248 Humboldt, enclosed model with drawer pans, Riffle-type sample splitter can be used to divide or halve dry materials such as cement,…

The Micro-Mill® II Grinder is ideal for rapid, high speed milling of small samples from 20 to 50ml. The 1/5 horsepower (150 Watt) motor drives a stainless steel blade that quickly pulverizes bauxite, bone, ceramics, coal, Devarda’s alloy, fertilizer, filter paper, fly ash, frozen tissue,…

For all Kontes pellet pestle mixers Compact, hand-held unit Motor driven Comes complete with two “AA” batteries. Dimensions: 3” Dia. x 6” L.

Batch mill for 2 different grinding procedures: Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with delivery). Cutting grinding for pulverizing soft, fibrous materials with a…

A precision ground instrument for macerating tissue. Rod and barrel are interchangeable. Rod is ground its entire length and can be reversed for double life. Rod fits Cat. No. 8124-10 Flex-Grip Chuck, forming a flexible coupling to the motor drive when

Borosilicate glass Especially for soft tissues Stainless steel rod is long enough to chuck into a suitable drive motor

Wheaton Safe-Grind plastic coated tissue grinders afford an added measure of safety over uncoated glass tissue grinders. The heavy plastisol coating protects the mortar from becoming scratched or checked, and assures you of a sure grip. More importantly, the plastic coating creates a greater safety…

These PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will…

Polypropylene tissue grinder efficiently homogenizes tissue and cells in microcentrifuge, centrifuge and grinding tubes. Cone tip tapers from 8.2mm (0.33") down to 2.9mm (0.12") in a length of 19.8mm (0.78") and has a rounded end Overall length: 21cm (8-1/4") Shaft…

High quality laboratory knife mill for grinding and homogenizing Homogenous samples for accurate analysis Industrial quality for demanding applications Programmable operating parameters for reproducible results The mill is designed for the fast and efficient processing of…

Resuspend protein and DNA pellets or grind soft tissues in micro centrifuge tubes Pestles are made of autoclavable blue polypropylene Pestles specially designed to match microtubes Optional cordless drive unit available , see Thomas number 3411E25 .

These grinders are precisely constructed with completely interchangeable parts to allow easier cleaning or replacement of damaged mortars. They are designed for use in preparation of tissue homogenates, and other similar applications. The Teflon® pestle is for soft tissue such as brain or…

Stand Assembly for Ultra EZgrind™ Tissue Homogenizer