Grinders

Compare Tool

Select up to 3 products

1 - 32 of 76
Sort
View
Show
  • Consists of piston-type Teflon® pestle with stainless steel shaft and replaceable grinding vessel of borosilicate glass Eliminates ground glass from homogenate; Teflon minimizes heat generated in use Completely autoclavable Precisely controlled grinding clearance Pestles and vessels…

  • Wheaton 33 low extractable borosilicate glass Precisely constructed with completely interchangeable parts Especially for use in preparation of tissue homogenates, etc. PTFE pestle for soft tissue Grinding chamber clearance is 0.1 - 0.15 mm Unit can be autoclaved …

  • These PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will…

  • Generator Tube, 10mm for homogenizer

  • The redesigned batch mill grinds hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. The development of the mill placed particular emphasis on safety. The mill…

  • For rapid, high-speed grinding of small samples from 20 to 50ml. Stainless steel or hard-faced blade rotates at speeds up to 12,000 rpm to successfully grind bauxite, bone, ceramics, coal, Devarda’s alloy, fertilizer, filter paper, fly ash, frozen tissue, glass, grain, kaolinites, leaves,…

  • 5 ml Tissue Grinder, Potter-Elv, Coated

    DWK Life Sciences (Wheaton)

    Wheaton Safe-Grind plastic coated tissue grinders afford an added measure of safety over uncoated glass tissue grinders. The heavy plastisol coating protects the mortar from becoming scratched or checked, and assures you of a sure grip. More importantly, the plastic coating creates a greater safety…

  • Micro Tissue Grinder Kit

    DWK Life Sciences (Wheaton)

    Complete kit of six tissue grinders: 0.1, 0.2, 1, 1, 2, and 1 mL Packed in a lightweight protective carrying case Glass-to-glass ground surface homogenizes connective tissue. Teflon ® units suitable for soft tissue. Dounce Tissue Grinder is supplied with two interchangeable pestles for large…

  • Grinds materials, by both impact and abrasion, that other grinders cannot Easy-to-use Very rapid grinding action Consistent particle size Air swept for easier cleaning and less thermal degradation USDA approved for NIR sample preparation Mill is designed for the rapid grinding of soft to…

  • 5 ml Tissue Grinder, Potter-Elv

    DWK Life Sciences (Wheaton)

    These grinders are precisely constructed with completely interchangeable parts to allow easier cleaning or replacement of damaged mortars. They are designed for use in preparation of tissue homogenates, and other similar applications. The Teflon® pestle is for soft tissue such as brain or…

  • The Micro-Mill® II Grinder is ideal for rapid, high speed milling of small samples from 20 to 50ml. The 1/5 horsepower (150 Watt) motor drives a stainless steel blade that quickly pulverizes bauxite, bone, ceramics, coal, Devarda’s alloy, fertilizer, filter paper, fly ash, frozen tissue,…

  • Generator Tube, 7mm for homogenizer

  • Ten Broeck-Type Tissue Grinders

    DWK Life Sciences (Wheaton)

    Borosilicate glass With precision made interchangeable pestles and tubes Clearance between pestle and tube 0.1 - 0.15 mm Designed for hand operation, but can be slow-speed motor driven by inserting a rubber stopper and metal rod into pestle Hollow handle permits packing with…

  • The grinding vessel, a round bottom tube with 2 mm wall, has grinding chamber made of precision bore tubing and top reservoir with pouring spout, to accommodate displaced fluid. Unground walls are completely transparent. Pestle is rounded to conform to bottom of grinding chamber and is either…

  • Re-suspend protein and DNA pellets or grind soft tissues in micro centrifuge tubes Pestles can be hand operated or motor driven Autoclavable types available Ideal for cell and tissue culture preparation Choose the best pellet pestle for your applications RNase-, DNase- and Pyrogen-free …

  • Generator Tube, 5mm for homogenizer

  • Similar to 3432N40 series, but with PTFE pestle and an unground glass tube Ideal for soft tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 0.5, 1, 3, 5, 8,…

  • All-glass construction with ground tube Ideal for connective tissues Clearance between pestles and tubes is .004 to .006 inches* Pestle can be motor driven (see Thomas number 3411E25 for Drive Unit) Available in working capacities of 1, 5, 8, 17 and 45 mL . * Stated clearances…

  • Humboldt, Riffle-type sample splitter with removable hopper can be used to divide or halve dry materials such as cement, gravel, powdered ores, coal, coke, sand, soils, etc. Material poured into the hopper is divided into two equal portions by a series of chutes that discharge the material…

  • The Humboldt, Small, Riffle-Type Sample Splitter supports the following standards: ASTM B215, ASTM C136, ASTM C702, ASTM C778, ASTM D421, ASTM D424, ASTM D457, ASTM D806, AASHTO T27, AASHTO T144, AASHTO T248 Humboldt, Riffle-type sample splitter can be used to divide or halve dry materials such…

  • The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes even with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness. It s ubstitutes cumbersome hand mortars by a high performance drive with electronic…

  • Batch mill for 2 different grinding procedures: Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with delivery). Cutting grinding for pulverizing soft, fibrous materials with a…

  • Speed range of 6,000 to 18,000 rpm Gentle, rapid size reduction via 2-step process High throughput Quiet, reliable, easy-to-clean The ZM 200 Ultra-Centrifugal Grinding Mill rapidly reduces soft to medium-hard and fibrous materials to analytical sample size. Grinding takes…

  • Precision large and small tissue grinder systems Ready-to-use Packaged in a sterile peel pouch Completely disposable Grinder tube doubles as a specimen container for transport and storage. Protective sleeve helps to contain aerosolization created during grinding. Tissue is…

  • Dounce-Type Tissue Grinders for Small Cells

    DWK Life Sciences (Wheaton)

    Borosilicate glass Designed for fine particle size reductions without damage to cell nuclei Each set consists of a mortar with large reservoir and two pestles: a loose and a tight pestle. Loose pestle has a clearance of 0.0035” - 0.0055”. Tight pestle has a clearance of…

  • Components Tissue Grinder Homogenizer Kit Components include: Kit contains one 85 mL cup, 5 each of 40, 50 and 60 mesh screens, 5 screen replacement keys and 2 glass pestles.

  • These PYREX® tissue grinders (homogenizers) are recommended for soft tissues found in the liver and brain. They are designed to handle both initial grinding and final homogenization in the same sequence of operations. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene…

  • Dounce Tissue Grinder

    DWK Life Sciences (Kimble)

    Produces a relatively coarse homogenate For cellular work where the nucleus remains intact after homogenization All glass construction * Stated clearances for the tubes and pestles are “total” not “annular”.

  • A precision ground instrument for macerating tissue. Rod and barrel are interchangeable. Rod is ground its entire length and can be reversed for double life. Rod fits Cat. No. 8124-10 Flex-Grip Chuck, forming a flexible coupling to the motor drive when

  • Micro-Sized, 0.2 mL Tissue Grinder

    DWK Life Sciences (Wheaton)

    Borosilicate Glass Finely ground pestle and tube Teflon® spacer aligns pestle and reduces aerosoling of product Matched sets

  • Ultra Series Tissue Grinders

    Biomedical Polymers

    Vitrified, Silica Cast Pestle Tips Provide Enhanced Grinding Capability for Difficult Samples The pestle tips of the new BMP Ultra Tissue Grinders have been vitrified using a proprietary silica casting process. The result is a glass-like abrasive surface which provides a more aggressive…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.