Kemtech America Glass Joints & Adapters
-
SYNTHWARE Inlet Connecting Adapter
Kemtech AmericaInlet Connecting Adapter, High Vacuum Valve Joint: #15 O-ring Valve Size: 0-4mm Side Port: 10mm OD.
-
Synthware Rotary Evaporator Anti-Splash Traps with Fritted Discs
Kemtech AmericaSynthware rotary evporator anti-splash trap with extra coarse fritted disc. Trap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. the frit reducesfoam from being carryover. With upper outer and lower inner standard taper joints.
-
SYNTHWARE Inlet/Thermometer Adapter
Kemtech AmericaThermometer Adapter, Microscale, Synthware, Joints: 14/10, Thermometer OD: 5.0-7.5mm, supplied with one compression cap and one Viton O-ring.
-
Synthware Distillation Adapters
Kemtech AmericaAdapter is bent 105 degrees. The top outer and lower inner standard taper joints are the same size.
-
Synthware Vacuum Distilling Adapters
Kemtech AmericaWith two standard taper inner joints that are parallel and at a 75 degree angle to the connecting tube. Distance between joints is 100mm.
-
SYNTHWARE Dessicant Flask
Kemtech AmericaDessicant Flask, Joint: 34/45, with 2mm bore PTFE stopcock.
-
Synthware Inlet Adapters with Hose Connection
Kemtech AmericaAdapter has a Nylon compression cap and a Viton o-ring to form a vacuum tight seal. Cap accommodates 5.0 - 7.5mm O.D. thermometer or gas inlet tube. The 8mm hose connection can be used for N2/Ar introduction or vacuum. Supplied with one Nylon cap and one Viton o-ring.
-
Synthware Rotary Evaporator Anti-Splash Traps
Kemtech AmericaTrap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With upper outer and lower inner standard taper joints.
-
SYNTHWARE Microscale Vigreux Distilling Heads
Kemtech AmericaWith Vigreux Indentations, used with 25mm immersion thermometer, and D27 distillation receiver.
-
Synthware Vacuum Adapters with Outer Joints & Glass Stopcocks
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper outer joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
Synthware Bushing Adapters
Kemtech AmericaSynthware bushing adapters allow for compact assemblies of dissimilar standard taper joints.
-
SYNTHWARE Gas Inlet/Outlet Adapter
Kemtech AmericaGas Inlet/Outlet Adapter, Microscale, Synthware, Joint: 14/10, Hose Connection OD: 8mm.
-
SYNTHWARE Solvent Distilling Heads
Kemtech AmericaSolvent Distilling Head Capacity: 250, 500, and 1000mL available Joints: 14/20 and 24/40 available Sampling Port: 14/20. Heads feature a 2mm double oblique stopcock bore
-
SYNTHWARE Hickman Still Head
Kemtech AmericaHickman Still Head, Synthware, Joint: 14/10, for microscale fractional distillation, supplied with one compression cap, one Viton O-ring and one PTFE-faced silicone septum.
-
Synthware Kjeldahl Distilling Trap Adapters
Kemtech AmericaAdapter is placed above flask to prevent carry-over of reactions which have a tendency to foam. With top outer and lower inner standard taper joints.
-
Synthware Connecting Adapters
Kemtech AmericaSynthware combination adapting connector with a top spherical socket joint and a lower standard taper inner joint.
-
Synthware Rotary Evaporator Anti-Splash Traps, Modified
Kemtech AmericaTrap is placed between the vapor tube and the evaporation flask. This design prevent possible contamination in the event of bumping. With two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Has upper outer and lower inner standard taper joints.
-
Synthware Inlet Adapters
Kemtech AmericaSynthware inlet adapter with a standard taper inner joint. Design allows introduction of reactants below the surface. The serrated hose connections have an O.D. of 10 mm.
-
Synthware Inert Gas Adapters with 2 Hose Connections
Kemtech AmericaSynthware Inert Gas Adapter has two hose connections 180 degrees from one another to provide a flow of inert gas over the apparatus. The joints are standard taper inner joints.
-
Synthware Distillation Adapters with Threaded Thermometer Ports
Kemtech AmericaSynthware distillation adapter with threaded thermometer port. The threaded port will accommodate a 6-7.5mm O.D. plain thermometer. The adapter has standard taper top outer joint and inner joints for the bottom and side. All joints are the same size.
-
SYNTHWARE Peptide Synthesis Vessels, Solid Phase
Kemtech AmericaPeptide Synthesis Vessel, Solid Phase, Synthware, Capacity: Available in sizes ranging from 10-50mL, Frit Porosity: Coarse or Medium, Frit Diameter: Available in sizes ranging from 15-25mm, GL Thread: 14 or 25 available, Arm OD: 8mm, Supplied with a PTFE lined cap and straight bore PTFE stopcock…
-
SYNTHWARE Dean Stark Distillation Receivers
Kemtech AmericaFor easy separation of water from reaction or distillation system.
-
Synthware Distillation Adapters
Kemtech AmericaSynthware distillation adapter with a 10/18 standard taper outer joint for a 76mm immersion thermometer. The adapter has a standard taper top outer joint and inner joints for the bottom and side.
-
Synthware Flow Control Adapters with Metering Stopcock, Straight
Kemtech AmericaSynthware flow control adapter with metering stopcock. Adapter has a 2mm PTFE metering stopcock between top outer and lower inner standard taper joints. Permits flow control of fluids between apparatus.
-
Synthware Enlarging Adapters
Kemtech AmericaSynthware enlarging adapters are used for connecting dissimilar standard taper joint sizes. The lower inner joint is smaller in size than the top outer joint.
-
Synthware Vacuum Adapters with Outer Joints & PTFE Stopcocks
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection turned 90 degrees to the standard taper outer joint. The PTFE stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
Synthware Vacuum Adapters with Glass Stopcocks, Straight
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection 180 degrees to the standard taper inner joint. The glass stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
Synthware Vacuum Adapters with PTFE Stopcocks
Kemtech AmericaSynthware vacuum adapter with a serrated hose connection 180 degrees to the standard taper inner joint. The PTFE stopcock has a 2 mm bore and is used to regulate the flow of gasses or liquids into reaction systems.
-
Synthware Distillation Connecting Adapters
Kemtech AmericaSynthware distillation connecting adapter. With standard taper top outer joint and inner joints at bottom and the side arm. Bottom and side arm joints are angled at 75 degrees to one another.
-
Synthware "U" Shaped Drying Tubes
Kemtech AmericaSynthware "U" shaped drying tube. With a lower inner standard taper joint. Cotton is typically used to contain drying agent.
-
SYNTHWARE Micro Vigreux Distillation Head
Kemtech AmericaDistillation head with condenser sealed to a Vigreux column. Vacuum adapter has an outer joint and accepts a distribution adapter (D201414). To be used with a 25mm immersion thermometer.
-
SYNTHWARE Solvent Still Head with Drainage Port
Kemtech AmericaSolvent Still Head Capacity: 500 and 1000mL available Top Joint: 24/40 Bottom Joint: 24/40 and 29/42 available Side Joint: 14/20 Drainage Port Joint: 14/20