Hardware, General Chromatography, PerkinElmer
-
-
1.6mm ID Sample Loop, Teflon, 500µL
PerkinElmer1. 6mm ID Sample Loop, Teflon, 500µL, connects to ports, #1 and #4 SC-FAST high-flow (-28 fittings, 3. 2mm OD x 1. 6mm ID tubing).
-
-
SQ300 Customer Performance Test Kit
PerkinElmerIdeal for a variety of analyses, this single quadrupole detector brings the unsurpassed sample insight of mass spectrometry to liquid chromatography applications. The Flexar SQ 300 MS ™ is an integral part of the powerful and exible Flexar LC product line. It features a revolutionary…
-
Sapphire Injector 1.8 mm (Cassette) in PFA Base
PerkinElmerSapphire injector HF-resistant Size: 1.8 mm
-
Mixing/Separation Assembly
PerkinElmerComplete modular unit, consisting of: two mixing manifolds with tubing adapters K and M. A gas-liquid separator with a PTFE membrane 5 spare PTFE membranes 1 PTFE tube 110mm long, and 1 PTFE tube 300mm long. Can be used with AA, ICP-OES, ICP-MS and Flow Injection Mercury Systems.
-
1.5 mL sample loop, 1 mm i.d.
PerkinElmerMultipurpose PFA FAST loops for high-flow valves. Recommended for use with 1.0 mm i.d. (gray) probe. 1.6 mm o.d., 1/4-28 fittings.
-
-
75cSt Hydrocarbon Oil - 1 Gallon
PerkinElmerWe offer a wide selection of Wear Matrix Oils and Solvents including 75 cSt Hydrocarbon Oil .
-
Spike Sample (ICP), Matrix per Volume 5% HNO3 per 100mL, Concentration of Element: 200 µg/mL AI, 50µg/mL Sb, 200µg/mL As, 200µg/mL Ba, 5µg/mL Be, 5µg/mL Cd, 20µg/mL Cr, 50µg/mL Co, 25µg/mL Cu, 100µg/mL Fe, 50µg/mL Pb, 50µg/mL Mn, 50µg/mL Ni, 200µg/mL Se, 5µg/mL Ag, 200µg/mL Tl, 50µg/mL…
-
-
Multi-element Mixed Standard Solution IV, Matrix per Vol. 5%HNO3 per 100mL, Concentration of Element: 200mg/mL Aluminium, 1,000mg/mL Calcium, 20mg/mL Chromium, 20mg/mL Nickel,400 mg/mL Potassium, and 200mg/mL Sodium.
-
Standard THGA Graphite Contact Cylinders, 1 Pair
PerkinElmerPerkinElmer has over four decades of experience in the design/development of graphite furnace systems and materials. The proper performance, maintenance and serviceability of our graphite furnace systems can be assured only through the use of genuine PerkinElmer supplied graphite components such as…
-
Each certificate also includes NIST documentation and information regarding the methods used. Designed to contain virtually every element in the mass spectrum for concentration checks. Multi-element Calibration Standard 1, Matrix per Volume: 2% HNO3 per 100 mL, Concentration of Element:…
-
Coolant Fluid for ELAN
PerkinElmerThe PolyScience ® WhisperCool ® Refrigerated Chiller is designed to deliver quiet and reliable performance over a broad range of operating temperatures and conditions. Extremely dependable and energy ef cient, it features a -10 to 40 °C operating temperature range, built-in process and equipment…
-
The Shimadzu Left Electrode with Housing is fit-to-perform on a Shimadzu atomic absorption (AA) instrument and is equivalent to Shimadzu part 206-50602.
-
Co Metallo-Organic Internal Standard - 400g
PerkinElmerPerkin Elmer offers the 6% Cobalt (Co) Internal Standard in a mineral spirits matrix in volumes of 200g or 400g.
-
Before using, dilute to a concentration of 20mg/mL. Plasma 40 Wear Metals Wavecal Organic Solution, Matrix per Volume 75/85 Base Oil/4oz, Concentration of Element: 500mg/mL K Li, Al, Ba, B, Cd, Ca, Cr, Cu, Fe, Pb, Mg, Mn, Mo, Ni, P, Si, Ag, Na, Sn, Ti, V, Zn
-
Calibrated rare earth oxide doped sintered PTFE polymer disc 8 mm thick x 58 mm diameter within a sealable container suitable for NIR abscissa standardization. Standard suitable for 60 mm NIRA II spinner.
-
1 mL sample loop, 1 mm i.d.
PerkinElmerMultipurpose PFA FAST loops for high-flow valves. Recommended for use with 1.0 mm i.d. (gray) probe. 1.6 mm o.d., 1/4-28 fittings.
-
Metal Additive Standard 4 -400g
PerkinElmerMatrix: Hydrocarbon Oil Description: Ca @ 5000 µg/g; Mg, P, Zn @ 1600 µg/g Size: 400 g
-
Quartz 2mm Bore Injector for ELAN DRC
PerkinElmerReplacement 2mm bore quartz injector with ball joint. For use with pass-through injector support part no. WE023951. Standard on the ELAN DRC.
-
Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene. The 2.0 mm i.d. Alumina injector is shipped standard with all PerkinElmer ICP-OES instruments. A variety of sizes are available as an…
-
DTA Calibration Reference Material, Palladium, Transition Point: 1551.85C
-
-
Oil Standard Copper Concentration 1000 µg/g -50g
PerkinElmerWe carry the Copper (Cu) Metallo-Organic Standard, ideal for many ICP-OES applications.
-
-
4mL Sample Loop
PerkinElmerMultipurpose PFA FAST loops for high-flow valves. Recommended for use with 1.0 mm i.d. (gray) probe. 1.6 mm o.d., 1/4-28 fittings.
-
Pure Grade Standards for AA and ICP-OES: Analyzed by ICP-OES Analyzed by Classical Wet Assay 32 trace impurities analyzed by ICP-MS of the final solution and reported on the certi cate Impurities reported at ppm level All Standards are prepared and certified under ISO Guide 34 and ISO 17025 …
-
V-Solv ICP Solvent - 5 Gallon
PerkinElmerV-Solv ™ ICP Solvent 5 gallon is a proprietary solvent that is used for diluting oil and other organic liquids for analysis by ICP and ICP-MS. Use V-Solv ™ as a matrix blank and as a diluent for your calibration standards and samples for outstanding nebulization characteristics. V-Solv ™ ICP…
-
20% (v/v) Biodiesel in #2 Diesel Fuel - 20mL
PerkinElmer20% (v/v) Biodiesel in #2 Diesel Fuel - 20mL
-
The Silicon (Si) Metallo-Organic Standard is available from PerkinElmer and ideal for an array of ICP-MS applications.