Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Ferrule Tools Tools are designed to remove ferrules stuck inside fittings. Screw the stainless steel ferrule tool into the ferrule and pull it out. Use the smaller capillary ferrule tool for capillary column ferrules (0.32 mm ID column and smaller). The megabore ferrule tool is for megabore…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC fittings and GC nuts for instrument plumbing are available in brass, stainless steel, and UltiMetal Plus, and in sizes ranging from 1/16 to 1/4 in. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Thomas offers a selection of high-precision, high-quality, stainless steel tools, from Agilent Technologies to avoid any deformation of the screws or nuts. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local…

Conveniently designed, pencil-shaped tool and a ceramic wafer that allow you to make clean and easy cuts in fused silica, glass and aluminum-clad capillary columns. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their…

For 6120 VL+, 6130 SL, 6140 SL-HT. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent starter kits contain the most often used capillaries and fittings. We included our genuine flexible stainless steel capillaries to make the best connection in your LC system, no matter the brand. The kits are for use with 3-4 or 1-2 mm ID columns, as well as for Micro LC columns. The free…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

2713J65 connector is required for plumbing 1/4 in. tubing to regulators. Kit includes the following: Ten 1/8 in. nuts, brass Ten 1/4 in. nuts brass Ten 1/8 in. front ferrules, brass Ten 1/4 in. front ferrules, brass Ten 1/8 in. back ferrules, brass Ten 1/4…

Nickel (Ni) skimmer cone used with x-lens for ICP-MS, standard cone with Agilent 7700x/e and 8800 ICP-MS,but also suitable for other 7700/8800 series ICP-MS, use with Ni sampling cone. Agilent Technologies products are intended for sale/shipment within the US only. International customers…

The Agilent Technologies union is compatible for use with HPLC (high performance liquid chromatography) and GC (gas chromatography) instruments. You can choose ideal replacement part or accessory which ensures smooth functioning of instruments. This accessory is made of sturdy material which offers…

The General Laboratory Tool Kit (2714M23) includes the following items: Toolbox Flashlight 8 in. bastard file 6 in. adjustable wrench 12 in. adjustable wrench for use with regulator No. 1 pt, 3 in. Pozidriv shaft, fits no. 2-4 screws No. 2 pt, 4 in. Pozidriv shaft, fits no. 5-10 screws …

Agilent's 1200 bar removable fitting (for 1/16 in od capillaries) consists of a stainless steel screw, an internal stainless steel ferrule and a front ferrule in PEEK. The fitting can be used throughout the flow path, but because it can be re-used without losing tightness, it is especially…

Agilent offers an array of Standard System Capillaries to ensure effective operation and maintenance of LC 1100/1200/1260 Series systems. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies…

The Agilent Technologies pump valve seal cap assembly can be used with all manual purge valves. Application: For All Manual Purge Valves, HPLC This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

UltrAA lamps are high-intensity, boosted discharge hollow cathode lamps. They use the standard lamp current, but apply an additional boost discharge within the lamp. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their…

Solvent rinsing removes many contaminants that accumulate in columns. The contaminants are removed by passing solvents through the column. Only bonded and cross-linked phase columns should be rinsed, or permanent damage to the column will result. This product is only available to U.S.…

Nebulizer, MicroMist, borosilicate glass, standard with Agilent 7700x/e, 8800 and 7500cx/ce series ICP-MS, for most sample types except those containing hydrofluoric acid or suspended particulates. This product is only available to U.S. Domestic Customers. Agilent Technologies…

Agilent produce a variety of inlet and outlet valves designed to ensure the ongoing stability and performance of pump systems in LC applications. Manufactured to Agilent's high levels of quality, security and integrity; LC inlet and outlet valves can be provided for a range of LC pumps. Active…

Agilent's range of high quality LC pump supplies includes Purge Valves for a range of systems and applications. Specific purge valve assemblies are available for a wide variety of Agilent-manufactured LC systems, providing you with excellent flexibility to acquire the supplies or replacements…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent provides a comprehensive range of high quality supplies to ensure the ongoing performance of the Thermostatted Column Compartment in LC systems. Manufactured to Agilent's high level of quality the capillary kits for Column Selection Valves include all relevant supplies for best…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Leak test most pressurized gas systems. We recommend that leak detecting solutions be used with care where there is any possibility of the fluid being aspirated into gas flow streams supplying the column or detector. This squeezable bottle comes with a “Snooper Tube” extendable up to 12…

Tubing cutter, for plastic or PEEK tubing. Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent provides a variety of high quality pump kits for LC systems and applications, containing all fittings and connections required. Includes pump seal exchange tool (5023-0279), torque wrench 2-25 Nm (G4220-20012), 4 mm hex bit, 89 mm length (G4220-20013), 2.5 mm hex bit (G4220-20014),…

Baskets and hangers are for use with gas chromatography columns Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.