Gas Chromatography

Compare Tool

Select up to 3 products

HomeAll Products

Gas Chromatography

1 - 32 of 762
Sort
View
Show
  • ADM Flow Meters

    Agilent Technologies

    Accuracy ±3% Operating temperature range: 0 to 45°C for instrument/-70 to 135°C for tubing Calibration traceable to NIST primary standards Measures flow rates from 0.5 to 1000 mL/min Split ratios ADM flowmeters allow most gas measurements with the touch of…

  • Glass Bubble Flow Meters

    Agilent Technologies

    Economical 10 or 100 mL These glass bubble flowmeters provide an economical way to monitor gas flow.

  • 1/16" Tubing Cutter

    Restek

    Produces square, smooth cuts in 1/16-inch tubing Eliminates tubing distortion Cuts hard or soft copper, aluminum, brass, stainless steel, Monel alloy, or titanium Replaceable cutting wheel

  • Vial Rack for Headspace Vials

    Restek

    Securely holds up to 36 headspace vials (fits 6, 10, or 20 mL vials). Vials lock in rack for convenient one-handed cap removal. Openings in the bottom of each well facilitate drainage. Alphanumeric indexing on rack simplifies sample identification. Easy to clean and fully autoclavable.*…

  • Tedlar® Gas Sampling Bag

    MilliporeSigma

    Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags…

  • Ultra High Purity Gas Generators

    Parker Hannifin

    Eliminates handling costly, dangerous gas cylinders Reliable source of gas No more cylinder changing Silent operation Simple annual maintenance State-of-the-art, self contained Balston® Lab Gas Generators are a sensible alternative to old technology gas cylinders. They are cost effective…

  • Indicating Oxygen Trap

    Restek

    Indicator changes from light green to grey as oxygen is trapped Heavy-walled glass body, protected by polycarbonate sleeve, prevents oxygen and water infusion Prepurged for fast stabilization 100 psi (689 kPa) maximum operating pressure Reduces oxygen to 0.1 ppm 10 µm frits at…

  • Gas and Vapor Sampler

    SGE

    The Gas and Vapor sampler enables spot collection of environmental gas samples or low pressure gas streams in 200cm3 impervious resealable bags. Gas and vapor collection Resealable sample bags Ideal for field analysis

  • Deactivated Glass Wool

    Restek

    More inert than our traditional glass wool Use to vaporize a sample in a liner prior to introduction into a capillary column

  • 2.0 mL, 9 mm Short-Cap, Screw-Vial Closures (Polypropylene, preassembled)

    Restek

    Choose preslit caps (available for some vials) to reduce the risk of needle bending, release vacuum from high-volume injections, and improve injection reproducibility when greater than 20% of vial volume is withdrawn.

  • Replacement Inlet Seals for Agilent GCs

    Restek

    The inlet seal at the base of the Agilent 5890/6890/7890 GC injection port contacts the sample and must be changed frequently to prevent adsorption of active compounds. In addition, septum fragments and sample residue accumulate on the disk surface, requiring disk replacement. To reduce…

  • Nylon Tube Brushes and Pipe Cleaner

    Restek

    Use to remove small septum fragments and residue from dirty glass inlet liners. Brushes are 1/8-, 3/16-, and 1/4-inch in diameter; pipe cleaner is one foot (30 cm) long.

  • SilTite™ FingerTite

    SGE

    SilTite™ FingerTite is the next generation ferrule system for gas chromatography systems delivering an easy, leak free installation for capillary columns without the use of any tools. Who will benefit from this product? If you are running a capillary column equipped gas chromatography…

  • Restek Electronic Leak Detector

    Restek

    Don't let a small leak turn into a costly repair—protect your analytical column by using a Restek leak detector. Backed by a one-year warranty, the Restek leak detector is the industry standard for performance and affordability in handheld leak detectors. Features & benefits…

  • Straight Seamless 316L Grade Stainless Steel Tubing (Treated)

    Restek

    Treated Straight, 6-Foot Length Stainless Steel Tubing Individual 6-foot (± 1/2") straight pieces. In response to customer requests, we offer 6-foot straight lengths of 1/8-, 1/4, and 3/8-inch treated tubing. This tubing can be cut to your exact requirements using a standard tubing cutter.

  • Restek ProFLOW 6000 Electronic Flowmeter

    Restek

    Flowmeters that can measure flammable gases are becoming mandatory due to the increased use of hydrogen in chromatography. With its Ex rating, the Restek ProFLOW 6000 meter is designed specifically with explosive and flammable gases in mind. The Restek ProFLOW 6000 is the only flowmeter you…

  • High-Power Electronic Crimping Tool

    Restek

    The innovative design of Restek’s high power crimping tool features interchangeable jaws, so you only need one tool and can purchase crimpers and decappers in the sizes that meet your laboratory’s needs. The separate crimper and decapper jaw sets fit standard lab vial seals that are…

  • Dual Vespel Ring Inlet Seals for Agilent GCs

    Restek

    Our patented dual Vespel ring inlet seal greatly improves injection port performance—it stays sealed, even after repeated temperature cycles, without retightening the reducing nut! This seal features two soft Vespel rings, one embedded in its top surface and the other embedded in its bottom…

  • SYNTHWARE Viton® O-Rings

    Kemtech America

    Various sizes available. These O-Rings are for use with solvent and chemical compatibility.

  • Micro-Vials with Screw Threads

    Restek

    Tapered for high recovery of contents Work with Mininert sampling valves

  • Stainless Steel Tube Brushes/Surface Brush

    Restek

    Unlike brass brushes that can leave a metal residue, these stainless steel tube brushes (3/8-, 3/16-, and 1/4-inch) work well for cleaning dirty collectors, injector ports, and detector ports. The surface brush can be used to remove residue that builds up on metal detector jets and electronic contacts.

  • Helium-Specific Super Clean Filter and Kit

    Restek

    Specifically designed for purification of helium in GC-MS systems Traps are packed and conditioned using helium Uses standard single-position base plate

  • Graphite Tubes

    Agilent Technologies

    Graphite tubes are quality tested to ensure each batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance and lifetime. Use partitioned tubes for general purpose work and when you need the best detection limits with samples that…

  • Coiled 316L Grade Stainless Steel Tubing (Treated)

    Restek

    Treated Seamless 316L Grade Stainless Steel Tubing High durability tubing. Recommended for: Inert applications High temperatures High pressures Corrosive environments Zero bleed

  • Shortix Capillary GC Column Cutter

    Restek

    Consistently make precise, clean, square cuts with a diamond blade Built-in magnifier to verify square cut Use with 0.25 mm ID to 0.53 mm ID tubing (0.78 mm OD maximum)

  • 2.0 mL Preassembled Vial Kits (8 mm/425 Screw-Thread, Unmarked Vials, Septa, and…

    Restek

    Caps attached to vials.

  • Indicating Moisture Trap

    Restek

    Reduces water to less than 10 ppb; indicator changes from yellowish-green to blue at 5% relative humidity Prepurged for fast stabilization Reduces noise from high-sensitivity detectors Heavy-walled glass body prevents oxygen and water infusion 10 µm frit prevents microparticulate…

  • Gas Clean Filters

    Agilent Technologies

    The Gas Clean Filter System delivers clean gases, reducing the risks of column damage, sensitivity loss and instrument downtime.

  • Parker Balston PEM Hydrogen Generators

    Restek

    Fuel-grade high purity hydrogen generators are safer alternatives to high-pressure gas cylinders. The new Proton Exchange Membrane (PEM) cell eliminates the use of liquid electrolytes with hydrogen generators. Deionized water is all that is required to generate hydrogen for weeks of continuous…

  • Uniliner Liner for 1/4" Packed Injection Port Conversion

    Restek

    On-column injections can be performed only with 0.53 mm ID columns because 26-gauge needles do not fit into the bore of 0.32 mm ID columns, or into the Unliner liner taper. Reduces solvent tailing Versatile—0.53 mm ID version can be used in the direct (DI) or on-column (OC) injection…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.