Furnaces

Compare Tool

Select up to 3 products

1 - 32 of 84
Sort
View
Show
  • Features: Available in two capacities Digital single setpoint temperature control to 1100°C Single display shows actual temperature or setpoint Ceramic fiber insulation permits faster heatup, reducing energy consumption Embedded heating element on top and both…

  • Ashing Furnaces

    Nabertherm

    The models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity. Tmax 1100°C Heating from two sides by…

  • Small benchtop muffle furnaces Maximum temperature range of 1200°C Four controller types: A. Basic automatic B. Single setpoint C. 4 ramp, 4 dwell D. 8 ramp, 8 dwell with RS 232 Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. Open…

  • 1200°C maximum temperature 120 or 350 cu. in. capacities Built-in vent port Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. Open coil heating elements on both sides of chamber enable rapid heating with minimal temperature…

  • Robust design and choice of four temperature controllers, ideal for industrial applications including ashing organic and inorganic samples and conducting gravimetric analysis. Spacious 14L (0.5 cu. ft.) capacity and reaches a maximum of 1200°C Four heating elements are located on…

  • The muffle furnaces L 1/12 - LT 40/12 are the right choice for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Tmax 1100°C or 1200°C Heating from two sides by ceramic heating plates…

  • The FO series represents the standard type of muffle furnaces which uses a microprocessor controlled thermoregulator and is capable of heat processing characterized by excellent repeatability. Due to high adiabatic characteristic, temperature rises in a very short time Space-saving and…

  • These powerful laboratory muffle furnaces are available for temperatures up to 1400°C, 1500°C, or 1600°C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces to all-rounders in the laboratory. Heating times of 40 minutes to…

  • PID, self-tuning, micro-processor controlled digital instrumentation Available with digital single setpoint, digital 16 segment single program or digital 16 segment multiple program microprocessor controllers Simultainously display of actual and set point temperatures in °C or °F Platinum 11…

  • For operation up to 1100°C (1980°F) These models also serve as Ashing Furnaces Side hinge door keeps the furnace hot face away from the user Atmosphere vent allows for atmosphere removal, ventilation and air injection Safety interlock system disconnects the power to the…

  • 1700°C Muffle Furnaces

    Across International

    CF1700 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1800 alumina fiber insulation and molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • 1-Zone 1700°C Tube Furnaces

    Across International

    TF1700 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • For added protection, the door safety switch stops power to heating elements when door opens Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition Two open coil heating elements on chamber sides assure fast heat-up with minimum…

  • The muffle furnaces L 1/12 - LT 40/12 are the right choice for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Tmax 1100°C or 1200°C Heating from two sides by ceramic heating plates…

  • The Thermo Scientific Thermolyne Industrial Benchtop Muffle Furnace has a B1 single-setpoint digital controller with ramp and dwell, 2.2L (0.08 cubic foot) heating area capacity, and a temperature range of 100 to 1,200 degrees C for general laboratory use. Four heating elements embedded in…

  • 2-Zone 1200°C Tube Furnaces

    Across International

    Ai TFM2 series dual-zone tube furnaces use the famous Kanthal (Sweden) coil wire as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller (Shimaden fp93 from Japan)…

  • Similar to 5311M25 but with microprocessor control, which permits the operator to select eight ramps and eight dwell segments. Push button controls for setting program; program memory is non-volatile and will last for more than a year without power. Two year manufacturer's limited warranty.

  • Box furnace Heavy-duty door and firebrick hearth collar Compact and easy-to-use Single setpoint or programmable microprocessor controls Counter-weighted door moves upward. Four separate embedded heating elements. Provides durability for the most demanding applications. Gives unsurpassed…

  • FURNACE 129CI SSP 240V

    Thermo Scientific

    Reduce energy consumption and increase heatup time with Thermo Scientific™ Thermolyne™ Benchtop 1100°C  Muffle Furnaces. The furnace is ideal for ashing most types of organic and inorganic samples, heat treating small steel parts, performing ignition tests, conducting…

  • 3-Zone 1600°C Tube Furnaces

    Across International

    Ai TFM3 series 1600°C 3-zone tube furnaces use SiC and MoSi2 as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller (Shimaden fp93 from Japan) with +/-1°C…

  • These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing…

  • Moldatherm® ceramic fiber insulation with embedded heating elements provides fast heat-up and recovery Setpoint and actual temperatures are displayed simultaneously on controller Heat-reflecting inner shell creates two insulating air spaces Fast, reliable, cost-effective answer for those…

  • Triple your usable working area with two supplied accessory refractory shelves using Thermo Scientific™ Thermolyne™ Largest Tabletop Muffle Furnace. Desiged for safe operation, these furnaces are available in three temperature control models. They are ideal for annealing glass,…

  • Maximum temperature of 1200°C 864 cubic inch capacity Built-in venting system Durable benchtop muffle furnace offers 864 cubic inches of heating area and an optional stainless steel shelf that doubles load capacity (Maximum temperature 900°C). Furnace has heating elements…

  • With their unbeatable price/performance ratio, these compact muffle furnaces are perfect for many applications in the laboratory. Quality features like the dual shell furnace housing of rust-free stainless steel, their compact, lightweight constructions, or the heating elements encased in quartz…

  • 1800°C Muffle Furnaces

    Across International

    CF1800 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1900 alumina fiber insulation and the famous Kanthal (Sweden) molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface. Furnace operation is…

  • Select between different bottom plates and collecting pans for protection of the furnace and easy loading (for models L, LT, LE, LV and LVT). Heat-resistant gloves for protection of the operator when loading or removing hot materials, resistant to 650°C or 700°C. Various tongs for easy…

  • Control Bulb. Stainless steel, with IC thermocouple. Used with a thermocouple pyrometer to verify compliance of furnace with ASTM performance requirements. Accessory to be used with Ramsbottom Carbon Residue Apparatus.

  • These fast-firing furnaces are ideal for simulation of typical fast-firing processes up to a maximum firing temperature of 1300°C. The combination of high performance, low thermal mass and powerful cooling fans provides for cycle times from cold to cold up to 35 minutes with an opening…

  • 1400°C Muffle Furnaces

    Across International

    CF1400 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and silicon carbide (SiC) heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • These compact tabletop tube furnaces with integrated control systems can be used universally for many processes. Equipped with a standard working tube of C 530 ceramic and two fiber plugs, these furnaces have an unbeatable price/performance ratio. Tmax 1200°C or 1300°C …

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.