Furnaces

Compare Tool

Select up to 3 products

1 - 32 of 87
Sort
View
Show
  • High-Temperature Chamber Furnaces with SiC Rod Heating

    Nabertherm

    These powerful laboratory muffle furnaces are available for temperatures up to 1400°C, 1500°C, or 1600°C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces to all-rounders in the laboratory. Heating times of 40 minutes to…

  • 3-Zone 1600°C Tube Furnaces

    Across International

    Ai TFM3 series 1600°C 3-zone tube furnaces use SiC and MoSi2 as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller (Shimaden fp93 from Japan) with +/-1°C…

  • 1200°C Muffle Furnaces

    Across International

    CF1200 series muffle furnaces feature the famous Kanthal (Sweden) spiral wire coils embedded in Mitsubishi (Japan) high quality alumina fiber insulation. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • Thermolyne BenchTop Muffle Furnaces, 1200°C

    Barnstead

    Small benchtop muffle furnaces Maximum temperature range of 1200°C Four controller types: A. Basic automatic B. Single setpoint C. 4 ramp, 4 dwell D. 8 ramp, 8 dwell with RS 232 Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. Open…

  • Ashing Furnaces

    Nabertherm

    The models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity. Tmax 1100°C Heating from two sides by…

  • Thermolyne™ Premium Large Muffle Furnaces

    Thermo Scientific

    Robust design and choice of four temperature controllers, ideal for industrial applications including ashing organic and inorganic samples and conducting gravimetric analysis. Spacious 14L (0.5 cu. ft.) capacity and reaches a maximum of 1200°C Four heating elements are located on…

  • 1800°C Muffle Furnaces

    Across International

    CF1800 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1900 alumina fiber insulation and the famous Kanthal (Sweden) molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface. Furnace operation is…

  • 1200°C LGO Box/Ashing Furnaces

    Lindberg/Blue M

    PID, self-tuning, micro-processor controlled digital instrumentation Available with digital single setpoint, digital 16 segment single program or digital 16 segment multiple program microprocessor controllers Simultainously display of actual and set point temperatures in °C or °F Platinum 11…

  • Laboratory Muffle Furnaces, with Lift Doors

    Nabertherm

    The muffle furnaces L 1/12 - LT 40/12 are the right choice for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. Tmax 1100°C or 1200°C Heating from two sides by ceramic heating plates…

  • Thermo Scientific 1100°C Moldatherm® Box Furnaces

    Lindberg/Blue M

    For operation up to 1100°C (1980°F) These models also serve as Ashing Furnaces Side hinge door keeps the furnace hot face away from the user Atmosphere vent allows for atmosphere removal, ventilation and air injection Safety interlock system disconnects the power to the heating elements when…

  • Furnace Muffle 1200C SSP 240V

    Barnstead

    The Thermo Scientific Thermolyne Industrial Benchtop Muffle Furnace has a B1 single-setpoint digital controller with ramp and dwell, 2.2L (0.08 cubic foot) heating area capacity, and a temperature range of 100 to 1,200 degrees C for general laboratory use. Four heating elements embedded in…

  • Exhaust Systems/Accessories for Muffle Furnaces

    Nabertherm

    Select between different bottom plates and collecting pans for protection of the furnace and easy loading (for models L, LT, LE, LV and LVT). Heat-resistant gloves for protection of the operator when loading or removing hot materials, resistant to 650°C or 700°C. Various tongs for easy…

  • Thermolyne Digital/Programmable, Muffle/Ashing Furnaces, 1100°C

    Barnstead

    Similar to 5311M25 but with microprocessor control, which permits the operator to select eight ramps and eight dwell segments. Push button controls for setting program; program memory is non-volatile and will last for more than a year without power. Two year manufacturer's limited warranty.

  • 3-Zone 1200°C Tube Furnaces

    Across International

    Ai TFM3 series 3-zone tube furnaces feature the famous Kanthal (Sweden) resistance wire as their heating elements. Furnace hearth is built with Mitsubishi (Japan) high quality fiber materials. Temperature of this furnace is controlled by high precision temperature controller (Shimaden fp93 from…

  • Needle, 18 gauge, 2"

    Koehler

  • Compact Muffle Furnaces

    Nabertherm

    With their unbeatable price/performance ratio, these compact muffle furnaces are perfect for many applications in the laboratory. Quality features like the dual shell furnace housing of rust-free stainless steel, their compact, lightweight constructions, or the heating elements encased in quartz…

  • 1700°C Muffle Furnaces

    Across International

    CF1700 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality grade 1800 alumina fiber insulation and molybdenum silicide (MoSi2) heating elements. A dual-wall steel housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • Lindberg/Blue M™ 1200°C Split-Hinge Tube Furnaces

    Lindberg/Blue M

    Configure Thermo Scientific™ Lindberg/Blue M™ 1200°C Split-Hinge Tube Furnaces for horizontal or vertical use. Features independent digital temperature control modules (sold semperately) which are available in standard or programmable options.  Key Features …

  • Muffle Furnaces with Embedded Heating Elements in the Ceramic Muffle

    Nabertherm

    We particularly recommend the L 9/11/SKM model if your application involves aggressive substances. The furnace has a ceramic muffle with embedded heating from four sides. The furnace thus combines a very good temperature uniformity with excellent protection of the heating elements from aggressive…

  • Furnace Bench Mufl Con M, 350Ci, SSP 240V

    Barnstead

    For added protection, the door safety switch stops power to heating elements when door opens Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition Two open coil heating elements on chamber sides assure fast heat-up with minimum…

  • Thermolyne™ Atmosphere Controlled Ashing Furnaces

    Thermo Scientific

    Achieve consistent temperature control with the Thermo Scientific™ Thermolyne™ Atmosphere Controlled Ashing Furnace, which reaches 975°C with the standard stainless-steel manifold and 1093°C with the optional inconel manifold.  Key Features: Adjustable gas…

  • Thermolyne Heavy-Duty Muffle Furnaces, 1200°C

    Barnstead

    Box furnace Heavy-duty door and firebrick hearth collar Compact and easy-to-use Single setpoint or programmable microprocessor controls Counter-weighted door moves upward. Four separate embedded heating elements. Provides durability for the most demanding applications. Gives unsurpassed…

  • 1400°C Muffle Furnaces

    Across International

    CF1400 series muffle furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and silicon carbide (SiC) heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan)…

  • High-Temperature Tube Furnaces

    Nabertherm

    These compact tube furnaces with SiC rod heating and integrated switchgear and controller can be used universally for many processes. With an easy to replace working tube as well as additional standard equipment options, these furnaces are flexible and can be used for a wide range of applications.…

  • 1-Zone 1800°C Tube Furnaces

    Across International

    TF1800 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality 1900 grade alumina fiber insulation and the famous Kanthal (Sweden) 1900 grade molybdenum silicide heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace…

  • Control Bulb Stainless Steel

    Koehler

    Control Bulb. Stainless steel, with IC thermocouple. Used with a thermocouple pyrometer to verify compliance of furnace with ASTM performance requirements. Accessory to be used with Ramsbottom Carbon Residue Apparatus.

  • Compact Tube Furnaces

    Nabertherm

    The RD tube furnaces convince with their unbeatable price-performance ratio, very compact outer dimensions and their low weight. These all-rounders are equipped with a working tube which also serves as support for the heating wires. Thus, the working tube is part of the furnace heating which has…

  • High-Temperature Tube Furnaces for Horizontal Operation

    Nabertherm

    High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases…

  • Split-Type Tube Furnaces for Horizontal Operation

    Nabertherm

    These tube furnaces can be used for horizontal (RSH) operation. The split-type design makes it easy to change the working tube. It allows for a comfortable exchange of various working tubes (e.g. working tubes made of different materials). Using the wide range of accessories these professional…

  • Box and Tube Furnace Controllers

    Lindberg/Blue M

    Program segments into Thermo Scientific™ Lindberg/Blue M™ Box and Tube Furnace Controllers for increased temperature accuracy. Features overtemperature control and multiple segment configuration; designed to work with the 1200°C split-hinge and 1500°C box furnaces. …

  • ACCESSORY VENT KIT (OP)

    Thermo Scientific

    This Thermo Scientific® ELED exhaust tubing kit is for use with Atmosphere controlled Ashing Furnaces or Muffle Furnaces F6000 Series.

  • High Temperature Furnaces with Molybdenum Disilicide Heating Elements with…

    Nabertherm

    The high-temperature furnaces HFL 16/16 HFL 160/17 are characterized by their lining with robust light refractory bricks. This version is recommended for processes producing aggressive gases or acids, such as under glass melting. Standard equipment like high-temperature furnaces HT, except: …

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.