Funnels
-
PYREX Aseptic Filling Bell
CorningFor aseptic filling of vessels Rubber tubing is attached to the top of the tubulation while the receiving vessel is placed inside the bell.
-
Weighing funnel
MilliporeSigma•Sit flat on balance - No rolling, no spilling! •Pouring necks designed to fit volumetric flasks, micro-tubes or any narrow neck apparatus for spill free transfer •Residual sample can be rinsed to guarantee 100% transfer •Suitable for safe handling of hazardous materials •Available in five…
-
SYNTHWARE Buchner Filter Funnels with Perforated Plate
Kemtech AmericaBuchner Filter Funnel with a sealed in Perforated Plate Capacity: Available in sizes ranging from 60-600 mL Glass Disk Size: Available in sizes ranging from 42-90mm. Not recommended for filtration where pressure will exceed 15 psi
-
Support Assemblies, 47mm, Fritted, 40/35
ChemglassGlassware system for vacuum filtration using 47mm membranes. This assembly uses a standard taper 40/35 joint to connect the support base to the filtering flask, eliminating the possiblility of phthalate contamination from rubber stoppers. Recommended for filtering corrosive solutions, particulate…
-
Sterile Disposable Filter Funnel Unit
Thermo Scientific NalgeneAnalytical Filter Funnel, Polystyrene; Cellulose Nitrate (C.N.) Membrane CONTAINS FILTERS ONLY Nalge 140 47 mm diameter filter with grid Ideal for use with filtering flasks or manifolds Convenient snap-away design with removable membrane; funnel marked at 100 mL …
-
1-1/2" Stem Powder Addition Funnels
DWK Life Sciences (Kimble)KIMAX® funnel with a short, wide stem Constructed with a heavy uniform wall and a strong, fire-polished rim and stem to provide a long service life Funnel has a high resistance to chemical attack and mechanical and thermal shock Designed from ASTM Specification E1095, Type IV…
-
Scienceware® Drum and Carboy Funnels
SP Bel-ArtLarge funnels are ideal for filling drums, barrels, tanks and carboys providing ample volume and fast flow. The two smaller sizes have a handle at the rim for added stability. Molded of natural polypropylene plastic Steam autoclavable at 121°C (250°F)
-
Funnel 6000 ml
CorningThese 6L PYREX® pear-shaped separatory funnels have glass No. 10 Standard Taper stopcocks and strong, hollow No. 38 Standard Taper glass stoppers. For replacement glass Standard Taper stoppers, see No. 7650; for stopcock plugs, see No. 7680; for retaining clips, see No. 7280.
-
Squibb style separatory funnel with a PTFE stopcock. Not supplied with stopper. For stoppers see CG-3000. Stopcock bore on all sizes is 2mm.
-
Short Stem Funnels
GSC International, Inc.These funnels are made from borosilicate glass and have a short stem. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for children 13 and under.
-
PTFE valve These improved PYREX® Squibb type separatory funnels provide an unbreakable PTFE valve and drip tip and have a screw thread closure at the top. Supplied complete with PTFE valve assembly and a screw cap with PTFE-faced silicone liner. Valve sizes range from 2 to 8 mm.…
-
Scienceware® Buchner Funnel Trowel
SP Bel-ArtSpecifically designed for use with 18, 24 and 36" Buchner Funnels, apply slight downward pressure and ‘sweep’ the trowel along the surface of the precipitate to quickly and efficiently smooth fissures appearing during the filtration process. Large surface area smooths fissures faster …
-
Autoclavable plastic separating funnel Excellent clarity and strength Leak-proof threaded screwcap This durable polypropylene separating funnel is a fantastic alternative to the fragile glass lab ware that so often finds itself in pieces on the counter or floor. It has a threaded,…
-
Funnel, Addition, Graduated
Ace GlassGraduated addition funnel featuring standard taper joints,graduations in both ascending and descending volume,protected drip tip and a glass stopcock. Graduations are calibrated from the stopcock.
-
Cylindrical style addition funnel similar to CG-1710, but with a PTFE stopcock. Funnels with 14/20 and 19/22 joints are supplied complete with a stopper. For replacement stoppers see CG-3000.
-
Cylindrical style addition funnel similar to CG-1716, but with PTFE stopcocks. Funnels with 14/20 and 19/22 joints are supplied complete with a stopper. For replacement stoppers see CG-3000.
-
Polyethylene Buchner Funnels
LabconcoFor filtering reflux products from Labconco Crude Fiber units Two-piece polyethylene Buchner funnel with heat sealed, 200-mesh stainless steel screen in uppersection; i.d. 76 mm.
-
Filter Assy 90mm w/2L Flask
DWK Life Sciences (Kimble)The 90 mm filtration apparatus with replaceable fritted glass support is recommended for large volume filtration analysis of corrosive liquids or samples with high particulate loads. The glass support disc can be replaced if it becomes clogged or if sample-to-sample contamination is a…
-
-
Separatory funnel featuring a PTFE stopcock and a PTFE stopper included. See Ace family 12632 for extra stoppers.
-
Funnel Separatory, Safety
Ace GlassThe safest separatory funnel available, our 7247 funnel features a plastic coating, a removable PTFE drip tip and pressure relief rodaviss threaded cap and stopper. Common accidents involving separatory funnels are breaking the glass drip leaving a jag
-
PYREX® Sugar Funnels
CorningMolded construction with bottom ground flat; for use in the sugar industries
-
Table-top Buchner Funnel
United Scientific SuppliesThese autoclavable, table-top Buchner funnels are ideal for vacuum filtration. Includes a tubulated side outlet and accepts standard filters. The 750ml size is 60mm tall, 147mm in diameter, requires 125mm filter paper and the side outlet is 5/8" (16mm).
-
European style funnel with new leak-tight, locking stopper that will not fall out during shaking or transportation. Outer ground joint at top is a Rodaviss joint. Stopper can be secured in top joint via cap and O-ring for a positive, leak-tight seal; n
-
Cylindrical style graduated addition funnel has a threaded, grease-free extended tip valve. Design of all PTFE plug permits semi-needle valve action. With a standard taper top outer joint and lower inner joint, both being the same size, and pressure equalizing arm. Funnels with 14/20 and 19/22…
-
Glass Separatory Funnels
GSC International, Inc.These Separatory Funnels are made from quality borosilicate glass, and come with a glass stopcock. They are commonly used in liquid-based extractions to separate the parts of the mixture into two solvent phases of different densities. PRODUCT WARNINGS WARNING: This product can expose…
-
VITLAB Funnels
BrandTech®Polyproplylene funnels with volume markings. Available in a wide range of sizes.
-
Squibb style separatory funnel with a PTFE stopcock. Supplied complete with a flask length PTFE stopper. See CG-3020-A for replacement stoppers.
-
SYNTHWARE Buchner Filter Funnels with Inner Joint
Kemtech AmericaBuchner Funnel, Fritted Disc, Inner Joint Capacity: Avilable in multiple capacities ranging from 15-600mL Joint: Multiple Joint sizes available Frit OD: ranging form 20-90mm Porosity: Medium and Course available Not recommended for filtration where pressure will exceed 15 psi
-
Plastic Buchner Funnels
United Scientific SuppliesThese polypropylene 2-piece funnels are lightweight, easy to clean and autoclavable. The top portion snaps into the lower one forming a vacuum seal that does not require greasing. The base of the top portion has a perforated filter plate.
-
Utility Funnels
GSC International, Inc.Our Utility Funnels are made from tough, chemically-resistant polypropylene. They have a 60º cone angle and ribs to prevent air-lock. PRODUCT WARNINGS Our products are not toys . Use in a laboratory or educational setting only. Not for children 13 and under.
-
Funnel, Powder, Angled, Heavy Wall Glass
Ace GlassHeavy wall glass powder funnel. Angled to fit in multi-neck flasks and reactor heads. Standard taper inner bottom joint.