Laminar Flow

Compare Tool

Select up to 3 products

Sort
View
Show
  • Protector Stainless Steel Radioisotope Laboratory Hoods

    Labconco

    Protector Stainless Steel Radioisotope Laboratory Hood. Provides protection from applications requiring the use of radiochemicals. Seamless type 304 stainless steel liner with integral work surface.

  • Purifier® Cell Logic®+ Class II A2 Biosafety Cabinets

    Labconco

    The Purifier Cell Logic+ Class II A2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination™ Technology Suite that includes the following: 10° angled sash, patented curved air grille with…

  • Fiberglass Blowers

    Labconco

    Fiberglass blowers are recommended for fume hood exhaust systems in moderate to highly corrosive conditions. The housing is made from molded fiberglass-reinforced polyester for durability and long life. Impellers are made of injection-molded polypropylene to resist corrosive atmospheres. …

  • Purifier Horizontal Clean Bench

    Labconco

    99.99% efficient HEPA filter Prefilter Class 5 conditions per ISO 14644-1 and 2 (formerly Class 100) Minihelic II pressure gauge Double-gasket, negative pressure HEPA filter leak protection Front-mounted light and blower switches Variable speed motor/blower(s) with vibration isolation pads …

  • HEPA Filter

    Labconco

    Applicable Categories: Purifier Class I & HEPA Filtered Enclosures, PuriCare Bedding Disposal Stations, XPert & RXPert Balance & XPert Bulk Powder Enclosures Applicable Products: PuriCare Bedding Disposal Stations, Purifier Class I Enclosures, Purifier HEPA Filtered Enclosures,…

  • Purifier Vertical Clean Benches

    Labconco

    Purifier Vertical Clean Bench, provides ISO Class 5 conditions appropriate for applications such as plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation. Features include aerodynamic air foil, UV-resistant, glacier white and…

  • Seismic Support Bracket Kit

    Labconco

    Includes four stainless steel seismic brackets and hardware for attachment to the stand Hardware to attach to the floor and installation are required Shipping weight 10 lbs. (4.5 kg)

  • Class II Cabinets IV Bar Kits

    Labconco

    IV Bar Kit for Purifier Logic Biosafety Cabinets and PuriCare Procedure Stations Kit includes: IV bar, mounting hardware, four hangers and instructions for installation

  • Ultraviolet Lamp Kits

    Labconco

    Ultraviolet Lamp Kit, for Purifier Logic Biosafety Cabinets and PuriCare Procedure Stations Includes 254 nm UV lamp, installation instructions and a ballast Available for all 100 V, 115 V 60 Hz and 230 V models

  • Benchtop Polypropylene Vertical Laminar Flow Hoods

    Sapphire Cleanrooms

    Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Laptop Computer Arm For Purifier Logic Class II Cabinets And Puricare Proce

    Labconco

    Securely support a laptop computer within easy view of an operator seated at the Purifier Logic Biosafety Cabinet or PuriCare Procedure Station. Mount to front of SoLo Base Stands or front leg of Telescoping Base Stands. Articulating arm raises, lowers and pivots to a steady position. Include…

  • Guardian 1000 Airflow Monitor 115 volts/60 Hz

    Labconco

    Guardian™ 1000 Digital Airflow Monitor may be mounted atop the enclosure in factory-prepared location. LCD displays actual face velocity within the hood. Audible and visual alarms indicate when velocity of the hood falls below set point. Includes airflow sensor, face plate with circuit board,…

  • Benchtop Stainless Steel Vertical Laminar Flow Hoods

    Sapphire Cleanrooms

    Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Double HEPA Filtration Kits

    Labconco

    For field-installation atop XPert Balance Filtered Systems and XPert Bulk Powder Filtered Systems. Provide a second level of HEPA Filtration to meet United States Pharmacopeia (USP) <800> standard for redundant HEPA Filter in series. Each Kit includes one HEPA Filter, set of bag and straps…

  • I.V. Bar for 3" Vertical Clean Bench

    Labconco

  • Floor-Standing Vertical Laminar Flow Hoods

    Sapphire Cleanrooms

    Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Interior Shelf For Purifier Logic Class II Cabinets And Puricare Procedure

    Labconco

    Stainless steel Mounts to rear grille and provides 8.0" x 5.0" (20 x 13 cm) surface to place supplies Weight capacity: 2.2 lbs. (1 kg), shipping weight 3 lbs. (1 kg)

  • Cord Management System For Purifier Logic Class II Cabinets And Puricare Pr

    Labconco

    Includes three stainless steel mounting hooks and three carabiners Hooks mount to the rear grille Carabiners secure power cords and tubing along the rear wall to keep them contained and away from the work area Shipping weight 3 lbs. (1 kg)

  • Enviralab Sterility Module

    Envirco

    Enviralab Benchtop Environmental Air Control Sterility Modules Provide vertical laminar flow of Class 100 air Solid state speed control provides average flow rate of 90 fpm 10 fpm measured 152 mm from diffuser screen Blower has direct-drive, continuous duty and permanently…

  • Support Shelves

    Labconco

    Provide 8.0" x 20.0" (20 x 51 cm) work surface to support remote equipment within easy access of the biosafety cabinet Epoxy-coated steel shelf mounts to left-side tubular frame of base stand Includes epoxy-coated steel shelf and fasteners. Installation is required Not for use…

  • Inflow And Downflow Sensor Kits

    Labconco

    Allow display of inflow and downflow velocities on the LCD information center Include airflow sensor, wiring harness and hardware Installation and certifier calibration are required Not for use on Class II, Type B2 cabinets.

  • Back Draft Damper

    Labconco

    Mounts in vertical duct run to prevent reverse pressurization of the exhaust system 3.0" (8 cm) high with 10" (25.4 cm) diameter OD inlet and outlet Shipping weight 5 lbs. (2 kg)

  • I.V. Bar for 4" Vertical Clean Bench

    Labconco

  • Canopy Hoods

    Labconco

    Designed to vent non-toxic materials such as heat, steam and odors from large or bulky apparatus such as ovens, steam baths and autoclaves, wall-mounted or suspended from the ceiling, built-in baffle to increase air velocities and enhance its overall capture efficiency, glacier white epoxy-coated…

  • Benchtop Powder Coated Steel Vertical Laminar Flow Hoods

    Sapphire Cleanrooms

    Sapphire Laminar Flow Hoods provide an economical work environment for the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. All materials used are selected for durability and contamination control. The exterior features a high…

  • Purifier Horizontal Clean Bench Service Fixture Kit

    Labconco

    Service Fixture Kit, includes serrated hose tip valve with quarter turn control handle, hardware and instructions for plumbing to services. Up to two fixtures may be mounted on the right hand side of the Purifier Horizontal Clean Bench.

  • Purifier Horizontal Clean Bench

    Labconco

    Purifier Horizontal Clean Bench, provides Class 5 conditions per ISO 14644-1 and 2 (formerly Class 100) for work with materials that do not generate harmful aerosols or vapors, yet require a particulate-free environment. Exclusive features: double-gasket; negative pressure HEPA filter leak…

  • Biosafety Cabinet & Procedure Station Service Fixture Kit

    Labconco

    For use with Purifier Logic Biosafety Cabinets & PuriCare Procedure Stations Service Fixture Kit, includes serrated hose tip valve with ball valve, quarter turn control handle, hardware and instructions for plumbing to services. Mounts on left or right side interior.

  • 4' SST Horizontal Clean Bench (230V) (26" Deep) UK

    Labconco

    Interior depth is 26.0" (66 cm). Plug type is British (UK). Purifier Horizontal Clean Benches direct HEPA-filtered air horizontally over the work area to provide ISO Class 5 (formerly Class 100) conditions and protect your work from particulate contamination. Applications for clean…

  • Protector Stainless Steel Perchloric Acid Laboratory Hoods

    Labconco

    Protector Stainless Steel Perchloric Acid Laboratory Hood. Designed specifically for procedures involving the use of perchloric acid. One-piece Type 316 stainless steel liner is free of joints to prevent build-up and simplify decontamination. By-pass airflow design. Built-in washdown system with…

  • RXPert™ Single Filtered Balance Systems

    Labconco

    RXPert Single Filtered Balance Systems are Class I biological safety cabinets that meet the USP <800>† requirements for non-sterile hazardous compounding. They provide user protection by keeping powders and particulates contained during hazardous drug manipulation. These powder hoods…

  • Techni-Dome® 360 Fume Hood

    Bel-Art - SP Scienceware

    The Techni-Dome® Fume Hood has a 50cm (20") ID and 45cm (18") height, making it ideal for simple micropipetting processes, blending of chemicals, handling of small biohazard items or interactive museum/educational displays. Compact; fits on crowded benchtops Clear,…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.