Flask has 4 bottom baffles and a constriction just below the neck to prevent splashing from reaching the closure.

HEAVY WALL Erlenmeyer shaped filtering flask with standard taper outer joint. For stoppers see CG-3000.

Kjeldahl shape flask with a standard taper outer joint.

HEAVY WALL single neck flask with a standard taper outer joint. Low profile design allows the flask to sit upright on the bench and also permits easy access of products with a spatula or policeman. The flask contour is excellent for controlled evaporation of foaming solvents during rotary evaporation.

Round bottom, HEAVY WALL, four-neck flask with standard taper outer joints and a # 7 Chem-Thread for insertion of thermometers or bleed tubes having an O.D. between 4 and 7mm.

Round bottom storage flask with a standard taper outer joint on the sidearm. The 50, 100 and 250mL sizes have a 0-4mm Chem-Vac™ Chem-Cap® valve while the 500 and 1000mL sizes have a 0-8mm valve size.

Flasks are manufactured to conform to Federal Specifications NNN-F-289 for Type 1, Class" A" unserialized flasks and ASTM E-288. Supplied complete with one closed bottom polyethylene stopper. For additional stoppers, see CG-8740. NOTE: THE CG-1602-20 CONFORMS TO ISO 1042, DIN 12664…

Flask has 6 bottom baffles to maximize oxygen transfer for bacterial, yeast and other cultures that require large amounts of oxygen for optimal growth. The 70mm vented cap has a 0.20µm PVDF hydrophobic membrane to allow for sterile gas exchange while preventing contamination. A silicone liner…

Extra heavy, unmarked blanks for fabrication of filter apparatus. Top has a tooled finish to accept a rubber stopper or neoprene filter adapter.

Round bottom single neck flask having a standard taper outer joint with a Chem-Vac™ Chem-Cap® valve sidearm. Plug may be removed for sampling from flask while a purge of inert gas is maintained thru the sidearm. Valve size is as listed.

Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Please note: There are separate listings for larger capacity round bottom flasks.

Storage flask sidearm has a 9mm OD tubulation for use with 3/8" Cajon® connections. Chem-Vac™ Chem-Cap® valve is used to control gas or liquid flow into the vessel.

Flat bottom borosilicate flask for use with Labconco and Virtis freeze dryers. Wide mouth design provides easy access sample. PLEASE NOTE: FLASKS ONLY. NOT SUPPLIED WITH RUBBER TOP, FILTER OR O-RING. Note: Labconco and Virtis are not related to or affiliated with Chemglass, and…

Features: Increased SAFETY- Unbreakable Lightweight Design Each Dewar is Supplied with a Lid Patented Closed Cell Foam Construction (USPTO # 7,971,744) Lower Boil Off and Consumption of Liquid Nitrogen Patented foam dewars provide a safe and durable vessel for handling…

Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. The 29/26 flasks have a groove tooled just below the grind to aid in clamping of the flask. Please note: There are separate listings for different capacity single neck round bottom flasks.

Flasks are designed for culturing organisms that require a large surface area to volume ratio. Available with a plain 59mm ID neck, 38mm OD Delong style neck or GL-45 screw neck supplied with a vented cap.

Erlenmeyer flask with screw thread finish. Supplied complete with white rubber lined black phenolic cap. Long skirted caps can be loosened without falling off while shaking flask.

European style flask with tapered walls and a shallow hemispherical bottom for more efficient mechanical or magnetic stirring. With standard taper outer joints on center and side necks.

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and 20º angled side necks. For Larger Flasks See CG-1524.

Erlenmeyer flask with a standard taper outer joint. For stoppers see CG-3000.

Wide mouth design facilitates mixing, pipette access, sampling and filling. Unique Flat Bottom Interior permits the use of a standard stir bar. Large permanent white letters make the capacity clearly visible. Flasks are calibrated "To Contain" at Class A tolerances, per ASTM E288…

Round bottom, HEAVY WALL, four neck flask with standard taper outer joints on the center and vertical side necks.

Round bottom, HEAVY WALL single long neck flask with a standard taper outer joint.

Low actinic red stained glass provides protection to light sensitive solutions. Allowing less than 1% transmission below 400nm and 5% from 400-600nm. Wide mouth design facilitates mixing, pipette access, sampling and filling. Unique Flat Bottom Interior permits the use of a standard stir bar. Large…

Quadruple baffled Erlenmeyer flasks are sterile, non-pyrogenic and manufactured with polycarbonate resin. Flasks are supplied with either exclusive DuoCap® designed for both aerobic and anaerobic applications (for aerobic applications the cap utilizes a 0.22µm pore size PTFE membrane for…

Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center neck and vertical side necks. Lower half of the flask is jacketed with two hose connections for circulation of heating or cooling liquid. Lower outlet is a CG-424-05, 4mm PTFE straight bore stopcock.

Round bottom, HEAVY WALL, five-neck flask with standard taper outer joints on the center neck and vertical side necks.

Round bottom, HEAVY WALL single short neck flask with a standard taper outer joint. Flask has two hooks 180°; apart for use with CG-110 stainless steel springs.

Erlenmeyer flask with standard taper stopper top. Available with or without stopper. For stoppers only see CG-3018.

Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.

Evaporating flask for use with rotary evaporators. Flasks have a HEAVY WALL for vacuum applications and are balanced to prevent run-out during rotation. For Plastic Coated flasks, see CG-1512-P.

Kjeldahl shape facilitates heating and stirring while permitting easy transfer of liquids or solids. Lower portion of flask fits standard heating mantles. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap®…