Ace Glass Lab Flasks
-
For exhaustive distillation of pesticides and industrial chemicals from water, sediments and tissue, and the simultaneous extraction of the distillate by a small volume of organic solvent. The addition of a bulb condenser in place of the straight tube condenser results in more efficient condensing…
-
Fernbach Flask, Baffled, Screw Cap
Ace GlassFernbach style culture flask with mide-mouth neck and screw cap closure. Supplied with GL45 PP cap. Flask is triple baffled on outside edges for maximum oxygen transfer to the media. Caution! Do not place on direct heat source.
-
Reaction Assembly, Portable, 12 and 22L
Ace GlassComplete self-supporting pilot plant assembly. Needs only to be located near coolant and electrical outlet. When not in use, entire assembly can be intact, without breakdown. Features flask, self-standing mechanical or air motor, flat-sided powder funn
-
Head, Duran Flange
Ace GlassFlat ground flange for use with all Reaction Flasks that have a 100mm (4") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.
-
Cylindrical form, silvered and evacuated. Furnished with an aluminum base. Exterior, including base, is coated with a tough, resilient, baked-on plastic which does not rupture if flask breaks. Intended for use with liquid nitrogen. Performance is not g
-
Similar to 9844-07 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -30 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Flask, Erlenmeyer, Stopper Top
Ace GlassErlenmeyer flask with included stopper top. No graduations.
-
-
Flask, Single Neck
Ace GlassRound bottom flask with short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. Used by glassblowers in fabricating single or multi-necked flasks.
-
Rugged spherical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp but with indents for greater agitation. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For reaction…
-
Fernbach style culture flask with 38mm long style straight neck to accomodate plastic or stainless steel closures, see Ace 3917 & 3918 product families. Flat bottom, no baffles. Caution! Do not place on direct heat source.
-
47mm Membrane Filtration Apparatus
Ace GlassBorosilicate glass filtration apparatus accomodates 47mm diameter membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base piece. The unit is easy…
-
With 24/40 standard taper joint at top and side hose connection.
-
Flask, Two Necks, Vertical
Ace GlassTwo neck, one center and on vertical side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.
-
Round bottom,single neck,all PTFE boiling flask. Maximum temperature 260 degrees C.
-
Round bottom flask with four necks arranged 3 in-line and one #7 Ace-Thred neck (ideal for suspending a thermometer or probe) at 90 degrees. The 500ml and 250ml sizes have angled side necks while the larger sizes feature vertical necks. Available in he
-
Distillation Apparatus, Cyanide
Ace GlassUsed in testing for soluble and insoluble cyanides in water. Basically conforms to ASTM D 2036 (excluding modifications). Flask is 1L with 24/40 joint and #7 Ace-Thred permitting variable depth positioning of fill tube which has a float valve for added protection against boil back. Jacketed still…
-
Bench scale, 1000 - 6000mL, Clean-In-Place sprayer for use with either pressurized or vacuum assisted flask washing. All PTFE construction. Four, 3 inch sections with available extenders allow flexibility. Ace recommends that the sprayer ball be positi
-
Flask, Receiving, Rotary Evaporator
Ace GlassGraduated, round bottom receiving flask for use with all rotary evaporators. 35/20 spherical outer joint will also mate to 35/25 ball joints. 250ml & 500mL size graduated in 10ml increments, 1000ml & 2000ml in 100ml increments.
-
Replacement drying flask for Buchi rotary evaporators. Pear shaped heavy wall with a standard taper single neck. Available plain or safety coated.
-
Flask, Heidolph Laborota
Ace GlassLarge receiver/evaporator flasks for use with Heidolph 20L rotary evaporators. Flasks are fabricated from blanks selected for balance and quality with carefully welded necks to provent "rotational whip". Receiver flask has a polished 40/25 joint, side neck is a GL-18 thread with solid cap. Bottom…
-
Hydrogenation/Gas Apparatus I
Ace GlassParr Model 3911 Hydrogenation unit for working volumes of 1ml to 200ml . Ace-thred vessels replace rubber stoppered vessels and eliminate cross-over contamination caused by leeching or sample retension. Complete unit includes all adapters needed for the supplied 8648 series bottles…
-
Flask, Round Bottom, Beaded Tube Port
Ace GlassRound bottom, single neck flask with a beaded tube end port.
-
Similar to 9843-04 Vessel except jacketed to provide active cooling from tap water or mechanical cooler. Jacket is cylindrical with flat bottom for greater stability. With #25 Ace-Thred center neck and two 14/20 side necks. Code -27 includes our 7506-10 #25 Ace-Thred bushing used to secure a…
-
Flask, Rotary Evaporator, Large
Ace GlassRotary evaporation flasks available plain, poly-coated or ambered. Poly-coating has a maximum temperature of 100 degrees C and can withstand acid and solvent splashes but not soakings. Small flange is 90mmod,67mmid and 18mm thick. Medium flange is 100mmod,72mmid and 19mm thick. Large flange is…
-
Used for limit test for arsenic as described in European Pharmacopeia, 1997, page 51. Complete consists of 125mL conical flask with 24/40 joint, a capillary chimney with a pulled tip below 24/40 joint at bottom, #5 O-Ring joint at top with hooks for 3/4" springs, and an adapter tube with #5 O-Ring…
-
Flask, Round Bottom, Septum Port
Ace GlassRound bottom, single neck flask with septum port for use with air-sensitive material. Available in standard wall and heavy wall versions. All flasks supplied with a 9096-32 septum.
-
Borosilicate Glass Filtration Apparatus
Ace GlassBorosilicate glass filtration apparatus accomodates 25mm membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,…
-
Distillation Apparatus, Cyanide
Ace GlassCyanide distillation apparatus used in testing for soluble and insoluble cyanides in water. Apparatus basically conforms to ASTM D-2036 except for modifications involving Ace-Threds and larger joints. Also available with threaded adapter to connect still head to trap. PTFE ferrules are supplied in…
-
Round bottom, single neck flasks design for use with our 6810 series giant extractor apparatus.
-
Flask, Erlenmeyer
Ace GlassWith outer joint. 125mL 28/15 used as collection flask at bottom of 7515 sampling cyclone. Available in 300mL and 500mL with 35/25 outer joint.
-
Head, Duran Flange
Ace GlassProduct family consisting of large spherical flasks and the heads that complement them. Flasks that feature a bottom outlet have descriptions that state the outlet's type, otherwise the flask has no outlet.