Spinner Flasks
-
4-45 Angled Sidearm Bioreactor Flask Complete 1L
Bellco GlassThe 4-45 bioreactor vessel is manufactured from type 1 class a Borosilicate glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel capseal has 5 ports for insertion of 12mm probes and 1/4? tubes. The vessel has an internal impeller assembly with stainless steel ball…
-
Bell-Flo Flask Only 1L
Bellco GlassManufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm Dimensions: 240" x 135" Flask size: 1l
-
Micro-Carrier Spinner Flask Complete 36L
Bellco GlassThermowell assemblies are used to hold inside one tube the rtd temperature sensor that monitors the temperature within the vessel in conjunction with a temperature controller. There are also tubes for addition of media and vent tube. Thermowell assemblies for 1965 and 1967-style angled sidearm…
-
Water Jacketed Flask Complete 1L
Bellco GlassFor use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 1l Cap size: 100mm Sidearm cap size (mm): 45mm
-
Disposable Spinner Flasks
Corning70 mm top cap Two angled side-arms Corning® disposable spinner flask system comes ready-to-use with paddle and integrated magnet, eliminating the need for time-consuming assembly or cleaning and reassembly. Made of USP XXXIII Class VI polystyrene, the vessel is comparable to…
-
4-45 Angled Sidearm Bioreactor Flask Only 1L
Bellco GlassThe 4-45 bioreactor vessel is manufactured from type 1 class a Borosilicate glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel capseal has 5 ports for insertion of 12mm probes and 1/4? tubes. The vessel has an internal impeller assembly with stainless steel ball…
-
Micro-Carrier Spinner Flask Complete 6L
Bellco GlassPromotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 6l Sidearm cap: 45mm Od x oal : 204 x 410mm Center neck: 100mm Consist of: 1…
-
Micro-Carrier Spinner Flask Complete 100mL
Bellco GlassPromotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller Size: 100ml Sidearm cap: 32mm Od x oal : 65 x 135mm Center neck: 100mm
-
Bell-Flo Flask Complete 1L
Bellco GlassManufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm Dimensions: 245" x 135" Flask size: 1l
-
Water Jacketed Flask Only 250mL
Bellco GlassFor use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 250ml Cap size: 70mm Sidearm cap size (mm): 25mm
-
Glass Ball Spinner Flask Complete 250mL
Bellco GlassManufactured from type 1 class a Borosilicate glass. Glass ball houses a magnet for gentle agitation of micro-carrier beads. Specially formed bottom indent prevents accumulation under the impeller. Sizes: 250ml Center cap size: 70mm Sidearm size: 32mm
-
IOB w/ Micro-Carrier Flask 8L
Bellco GlassInternal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Cap size: 100mm Flask size: 8l Dimensions: 238 x 430mm Sidearm cap: 45mm
-
Spinner Flask
ChemglassWater jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass. Flasks are typically used with a circulating water bath. Jacket volumes are approximate and flasks are not graduated. Note: Paddle and Cap assembly are…
-
Bell-Flo Flask Complete 500mL
Bellco GlassManufactured from type 1 class a Borosilicate glass. Bottom indent and 3 vertical baffles for optimal mixing. Sidearm cap: 45mm Center cap: 100mm Dimensions: 170" x 110" Flask size: 500ml
-
Water Jacketed Flask Complete 100mL
Bellco GlassFor use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 100ml Center cap size: 70mm Sidearm cap size (mm): 18
-
Water Jacketed Flask Only 50mL
Bellco GlassFor use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 50ml Cap size: 51mm Sidearm cap size (mm): 18
-
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 100ml Sidearm cap: 32mm ( includes 2 each) Od x oal : 65 x 135mm Center neck: 70mm
-
Bio-Probe Spinner Flask Only 3L
Bellco GlassIdeal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 3l Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately Dimensions: 165 x 290mm
-
Micro-Carrier Spinner Flask Complete 500mL 100mm
Bellco GlassPromotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 500ml Sidearm cap: 45mm Od x oal : 110 x 180mm Center neck: 100mm
-
Water Jacketed Flask Complete 3L
Bellco GlassFor use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 1300ml Cap size: 100mm Sidearm cap size (mm): 45mm
-
Water Jacketed Flask Complete 8L
Bellco GlassFor use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 8000ml Cap size: 100mm Sidearm cap size (mm): 45mm
-
Water Jacketed Flask Complete 250mL
Bellco GlassFor use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8? id silicone tubing (bellco m7965037) available complete with micro-carrier impeller assembly or as components. Jacket volume (ml): 250ml Cap size: 70mm Sidearm cap size (mm): 25mm
-
Micro-Carrier Spinner Flask Only 36L
Bellco GlassPromotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Od x oah:410mm x 535mm Center cap: 100mm Sidearm cap: 45mm
-
Bio-Probe Spinner Flask Complete 500mL
Bellco GlassIdeal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 500ml Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately
-
Micro-Carrier Spinner Flask Complete 15L
Bellco GlassPromotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 15l Sidearm cap: 45mm Od x oal : 294 x 470mm Center neck: 100mm
-
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. Size: 500ml Sidearm cap: 32mm ( includes 2 each) Center neck: 70mm Od x oah - 110 x 180mm
-
Glass Ball Spinner Flask Only 1000mL
Bellco GlassManufactured from type 1 class a Borosilicate glass. Glass ball houses a magnet for gentle agitation of micro-carrier beads. Specially formed bottom indent prevents accumulation under the impeller. Size: 1l Center cap: 100mm Sidearm cap: 45mm
-
Glass Ball Spinner Flask Only 3000mL
Bellco GlassManufactured from type 1 class a Borosilicate glass. Glass ball houses a magnet for gentle agitation of micro-carrier beads. Specially formed bottom indent prevents accumulation under the impeller. Size: 3l Center cap: 100mm Sidearm cap: 45mm
-
Bio-Probe Spinner Flask Only 500mL
Bellco GlassIdeal for small working volumes with ph and do probe. 32mm low sidearms for insertion. Size: 500ml Center cap size: 100mm 32mm compression fitting probe & port assemblies sold separately Dimensions: 110 x 175mm
-
4-45 Angled Sidearm Bioreactor Flask Only 3L
Bellco GlassThe 4-45 bioreactor vessel is manufactured from type 1 class a Borosilicate glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel capseal has 5 ports for insertion of 12mm probes and 1/4? tubes. The vessel has an internal impeller assembly with stainless steel ball…
-
IOB w/ Micro-Carrier Flask 3L
Bellco GlassInternal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Cap size: 100mm Flask size: 3l Dimensions: 165 x 300mm Sidearm cap: 45mm
-
IOB w/ Micro-Carrier Flask 1L
Bellco GlassInternal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. Cap size: 100mm Flask size: 1l Dimensions: 135 x 250mm Sidearm cap: 45mm