Ace Glass Specialty Flasks
-
Arsine Generator, Guthzelt
Ace GlassDesigned for arsenic analysis by the diethyldithiocarbramate colorimetric method. Meets APHA Standard 104A, ACS/USP, and EPA specifications. All wetted surfaces are borosilicate glass or PTFE clad joints. Code -40 complete unit consists of one 24/40, 125ml erlenmeyer flask, one 24/40 to 12/2…
-
Distilling round-bottom flask coated with Ace Instatherm. Designed to operate up to 360 & deg; C, heating response time is very rapid, (5° per minute), with very low thermal lag. Has vertical standard taper reinforced outer center neck and two angled standard taper reinforced outer side necks.…
-
Flask, Reaction, Cylindrical
Ace GlassCylindrical, heavy wall reaction flask with extra thick flat, ground flange. Without constriction at top to facilitate introduction/removal of material and allow for ease of cleaning. Available in 1L to 4L capacities, flat bottom and round bottom, with
-
Reaction Flask, Removable Stopcock
Ace GlassWith 4mm bore stopcock for rapid removal of contents without disturbing the general arrangement of the apparatus. Stopcock is separated from lower section by 28/15 joint. Neck opening is standard 10.2cm (4"). For joint clamp, order 7669-12. Use 6496 Cl
-
Flask, Pressure, Round Bottom
Ace GlassRound bottom, heavy wall, pressure rated flask. All flasks come complete with a solid PTFE plug seal with front seal FETFE o-ring for better containment of product. Vessels are tested at 1.5x for a working pressure rating at 60PSI at 120°C. Flasks
-
Instatherm Reaction Flask and Head
Ace GlassRugged cylindrical reaction flask and head with Duran, flat, ground 4" flange with O-Ring groove and integral heating element that eliminates the local superheating commonly associated with more conventional heating methods and eliminates cumbersome and dangerous oil baths. Response is rapid and…
-
-
Flask, Reaction, Cylindrical, Jacketed
Ace GlassRugged cylindrical reaction flask with Duran, flat, ground flange and o-ring groove, with water/steam jacket. Jacket inlet/outlets are available with either 35/25 o-ring ball joints (sealed tangentially) or with Ace-Thred connections. For use with 6517 quick release clamp. Flask supplied with one…
-
Flask, Single Neck, Flat Bottom
Ace GlassFlat bottom flask featuring a single, short neck with a standard taper outer joint.,/p>
-
Scale-Up Series™ jacketed cylindrical flasks with Easy Drain glass valves and KF flange inlet & outlets. The flask is graduated on both sides allowing for either left or right hand flask orientation. The Easy Drain valve is designed to prevent accidental removal when opening and incorporates…
-
Thomas Nos. 1165M15, 1165M16, 1165M17, 1165M18, 1165M19, 1165M20, 1165M21 Jacketed cylindrical flask with flush seal and beaded pipe²inlet and outlets. The flask is graduated on both sides²which allows for either left or right hand orientation.²Features a Schott-Duran style o-ring…
-
Reaction Flask Head, #7 Ace-Thred
Ace GlassHeads with four necks, three inline standard taper joints and one perpendicular #7 Ace-Thred™ thermometer joint. Included 5029 nylon bushing & FETFE o-ring permits vertical adjustment of 6-7mm OD thermometers. Use with our 6504,6511 & 6516 reaction vessels that feature either a 137 x 100mm ID…
-
Scale-Up Series™ Cylindrical Flasks
Ace GlassScale-Up Series™ cylindrical flasks with an Easy Drain glass valve. The flask is graduated on both sides allowing for either left or right hand flask orientation. The Easy Drain valve is designed to prevent accidental removal when opening and inc
-
Flask, Jacketed, with Polished Joint
Ace GlassJacketed version of standard 9448 Flask. Furnished with polished 45/50 outer joint so that it can be used with 9443-20 or 9446 Heads with PTFE-Clad joint which does not require lubricant and does not freeze under high temperature, vacuum operation.
-
Cylindrical pilot plant reactors providing portable, self-contained reaction system for research and production purposes. Systems available in 10L, 30L and 50L plain or jacketed capacities with a variety of domed or flat reaction heads. Ask us to build
-
Flask, Reaction, Spherical, Jacketed
Ace GlassRugged spherical jacketed reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). 12L and larger are supplied with reference graduations. Inlet/outlets available with…
-
Heavy wall cylindrical reaction flask with Duran grooved flange opening. Flask has Zero Dead Space, (ZDS), bottom valve. The valve features no material hang-up in the fully open position. When closed, the valve seats flush with the bottom of the flask. Includes one CAPFE o-ring. See Ace 6517 for…
-
Flask, Two Necks, Pear-Shaped
Ace GlassPear-shaped, with side arm for use with 9095 rubber thermometer adapter. Joint is 14/20.
-
Head, Duran Flange
Ace GlassFlat ground flange for use with all Reaction Flasks that have a 100mm (4") Duran ground mating flange. Supplied with three in line ground joints and one or two 90 degree joints. For thermometer or probe adapter, see our 5028 series. For clamp, see 6517.
-
Flask, Flat Bottom, Three Neck
Ace GlassFlat bottom, three neck flask can sit on stirrer hot plate with no further support. 250ml and 500ml sizes feature angled side necks while the 1000ml size necks are vertical.
-
Reaction Flask, Cylindrical, Jacketed
Ace GlassCylindrical jackted reaction flask with a 4" (10.2cm), top opening. Jacket inlet/outlets are available with tangentially sealed with 28/15 O-Ring ball joint connections, or with #11 Ace-Threds, for use with 3/8in tubing.
-
Fully jacketed, european style flasks with tapered walls and shallow bottoms for more efficient half-moon shaped paddle stirring. Jacket has hose connection inlet/outlet. Available in three necks or 5 neck version featuring two #7 Ace-Thred joints with
-
Borosilicate glass, round bottom reaction vessel. Supplied with 24/40 center neck and two 24/40 side necks. Fourth neck is #25 Ace-Thred on 500 mL for use with 7506-10 Bushing and O-Ring; #36 Ace-Thred on 1000 mL and 2000 mL sizes for use with 7506-12 Bushing and O-Ring to make a leak-tight…
-
Flask, European Style
Ace GlassEuropean style, tapered walls with shallow bottom for more efficient magnetic or mechanical half-moon shaped paddle stirring. Supplied with center neck, two side necks. Available with 1 additional #7 Ace-Thred or 2 additional #7 Ace-Threds complete wit
-
Rugged cylindrical jacketed reaction flask with Duran, flat, ground flange and o-ring groove. Various bottom outlet options are available (see details below). For use with 6517 quick release clamp. Jacket inlet/outlets are available with either tangentially sealed o-ring ball joints or with…
-
Ace Glass Freeze Drying Flask
Ace GlassComplete fast-freeze flask with snap-on rubber cap and 1/2-inch or 3/4-inch O.D. plain or valve adapter, compatible with all major brand freeze drying manifold valves. Borosilicate flasks are designed for ease of handling, faster loading. Uniform wall weight maximizes heat transfer while…
-
PTFE Reactor, Body Only
Ace GlassAll PTFE reactor body, component of our 6390 PTFE Filter Reactor product family.
-
Flask, Reaction, Spherical, Plain
Ace GlassRugged spherical reaction flask with Duran, flat, ground flange with O-Ring groove, for use with 6517 Quick Release Clamp. Each flask is supplied with one CAPFE O-Ring (PTFE encapsulated silicone O-Ring). Plain silicone O-Rings are also available. For reaction heads, see 6528, 6529 or 6530. For…
-
Scale-Up Series™ Bench-Top Reactor
Ace GlassAce Glass Scale-Up Series™ plain bench-top reactor base system includes the essential items needed to begin building a customized reactor specifically for your application. Reactors scale-up from 100mL to 6000mL on the bench and their geometry tr
-
Flask, Tapered wall, Five Neck, Jacketed
Ace GlassFully jacketed flask with sharply tapered walls which allows for continuous operation with smaller volumes. Jacket has hose connection inlet/outlet. Supplied with nylon bushings and fetfe o-rings.
-
Flask Single Neck, Side Arm, No-Air
Ace GlassRound bottom flask with single neck with standard taper joint and a 8mm side outlet with either a 2mm glass stopcock or a 0-3 inlet valve. Ideal for Schlenk lines and either NO-AIR or vacuum applications. Includes one 9096-32 septa for side arm.
-
Flask Reaction, Hi-Vac Valve NO-AIR
Ace GlassRound bottom borosilicate glass flask with standard taper center neck and a 0-4 Hi-Vac valve for precise control. Flask is ideal for simple NO-AIR and vacuum applications. Outlet arm is 8MM and can be fitted with a rubber septa for insertion of samples or additives via syringe.