Boiling Flasks

Compare Tool

Select up to 3 products

HomeAll Products

Flasks Boiling Flasks

1 - 32 of 117
Sort
View
Show
  • PYREX Boiling Flasks

    Corning

    Carefully designed and manufactured from borosilicate glass Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance Excellent chemical durability provides contamination-free results and long life…

  • SYNTHWARE Round Bottom Angled Three Neck Flasks

    Kemtech America

    SYNTHWARE round bottom, heavy wall, three neck flasks with standard taper outer joints on both the center neck and the angled side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • Angled Two Neck Round Bottom Flasks

    DWK Life Sciences (Kimble)

    Two-neck heavy wall flask with Standard Taper outer joints Side neck is angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • SYNTHWARE Flat Bottom Flasks

    Kemtech America

    SYNTHWARE flat bottom boiling flasks with full length standard taper outer joint. All sizes are heavy wall design and are hand blown from borosilicate tubing to ensure uniform wall thickness.

  • PYREX Round Bottom Boiling Flasks

    Corning

    Short neck Heavy wall PYREX round bottom boiling flasks have full-length outer Standard Taper joints, but with shorter necks. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and…

  • Class A Burets

    Kemtech America

    Buret. Class A.

  • SYNTHWARE Round Bottom Four Neck Flasks with Vertical Side Joints

    Kemtech America

    SYNTHWARE round bottom, heavy wall, four neck flasks with standard taper outer joints on both the center neck and the vertical side necks. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • SYNTHWARE Round Bottom Three Neck Flasks with Bottom Outlets

    Kemtech America

    SYNTHWARE round bottom, heavy wall, three neck flasks with a bottom outlet. Both the center neck and the vertical side necks are standard taper outer joints. The lower outlet is a 4mm straight bore PTFE stopcock. All sizes are hand blown from tubing to ensure uniform wall thickness.

  • Class A Mixing Bulb Style Wide Mouth Flasks with Standard Taper Stoppers

    DWK Life Sciences (Kimble)

    Wide mouths allow easy access into these mixing bulb volumetric flasks for applications such as dissolving tablets and other solids. Mixing bulb in neck accommodates approximately one tenth of the flask’s total volume and is designed to aid in dissolving or mixing the contents of the…

  • Flask, Single Neck

    Ace Glass

    Round bottom flask with short neck and outer joint. Available in standard and heavy wall. Heavy wall approximately 30% heavier than standard wall. Used by glassblowers in fabricating single or multi-necked flasks.

  • SYNTHWARE Round Bottom Four Neck Flasks with Threaded Side Arms

    Kemtech America

    SYNTHWARE round bottom, heavy wall, four neck flasks with threaded side arm. Standard taper outer joints on both the center neck and the vertical side necks. Threaded side arm is for insertion of plain thermometer or bleed tube having an O.D. between 5.0mm and 7.5mm. Supplied complete with Nylon®…

  • Flask, Round Bottom, Three Neck, Spherical joints

    Ace Glass

    Round bottom flasks, three vertical necks, spherical outer joints. Available in standard and heavy wall.

  • Flask Boiling Round Bottom 250ml

    DWK Life Sciences (Kimble)

    KIMAX® round bottom boiling flask with a short neck and a medium length Standard Taper joint Designed from ASTM Specification E1403, Type II, Class III requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Single Standard Taper Neck Heavy Wall Round Bottom Flasks

    DWK Life Sciences (Kimble)

  • Borosilicate Glass Round Bottom Boiling Flasks

    United Scientific Supplies

    Borosilicate Glass Round Bottom Boiling Flasks are designed to give the best combination of thermal shock resistance, physical strength, and resistance to chemical attack.

  • KIMAX Joint Boiling Flask

    DWK Life Sciences (Kimble)

    Round bottom Meets ASTM E1403, Type 1, Class 3

  • Boiling, Round Bottom, Short Neck Flasks, Full Length standard taper 24/40 Joint

    DWK Life Sciences (Kimble)

    KIMAX boiling flask designed from ASTM Specification E1403, Type II, Class 3 requirements.

  • Flask, Round Bottom, Stopcock Septum Port

    Ace Glass

    Round bottom, single neck flask with stopcock septum port side arm for use with air-sensitive material. Features a PTFE, 2mm bore stopcock. Available in standard wall and heavy wall versions. All flasks supplied with a 9096-32 septum.

  • Heavy Wall 10L Round Bottom 3-Neck Flasks

    Across International

    Ai 10L heavy wall, 3-neck round bottom flask with 24/40 and 34/45 standard taper joint. Comes with two vertical 34/45 side necks and one 24/40 center neck. Glass material: high borosilicate glass 3.3.

  • SYNTHWARE Sublimator with Glass Stopcock

    Kemtech America

    Sublimator, Synthware, Joint: 24/40, Stopcock: 2mm Glass, supplied with special 25mL long neck flask for small volume efficiency.

  • Single Standard Taper Neck Heavy Wall Round Bottom Flasks

    DWK Life Sciences (Kimble)

    Single neck flask with a Standard Taper outer joint Heavy wall Ref: ASTM Method D95 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Flask Florence Flat Bottom 6000ml

    DWK Life Sciences (Kimble)

    KIMAX® flasks have a low coefficient of expansion to resist thermal shock. They are constructed with sturdy walls to minimize mechanical breakage and reinforced tooled tops for strength and a secure stopper fit Designed from ASTM Specification E1403, Type I, Class I requirements …

  • Round Bottom Two Vertical Neck Flasks

    Wilmad-LabGlass - SP Scienceware

    With two vertical necks and a round bottom, these borosilicate glass flasks feature a side neck Standard Taper 24/40 outer joint. The center Standard Taper joint varies with flask capacity.

  • Flask, Round Bottom, Three Neck

    Ace Glass

    Round bottom flasks, three vertical necks, standard taper outer joints, standard and heavy wall. Flasks feature a flare-out directly below the center joint to facilitate cleaning and removal of stir blades.

  • Flask 1000 ml Cs30

    Corning

    These 1L PYREX® round bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for…

  • Flask, Two Neck, Angled Side Neck

    Ace Glass

    Two neck, one center and one angled side neck, round bottom flask with standard taper joints. Available in standard wall or heavy wall.

  • Borosil® Round Bottom Boiling Flasks

    Borosil

    Borosil® Round Bottom Boiling Flasks have uniform wall thickness for even heat distribution. Constructed from stress-free borosilicate. Borosil® Boiling Flasks are heat-resistant. Built to withstand the demands of the modern lab, each flask has a flame-polished, beaded rim for added…

  • Flask 50 ml

    Corning

    These 50mL PYREX® flat bottom boiling flasks have full length outer 24/40 Standard Taper joints, but with shorter necks. Adapter Nos. 8800, 8820 and 8825 are used to connect flasks with different size joints, thus allowing numerous combinations for diverse assemblies. Manufactured from…

  • Flask Boiling Flat Bottom 500ml

    DWK Life Sciences (Kimble)

    KIMAX® boiling flask with a short Standard Taper joint neck. Designed from ASTM Specification E1403, Type I, Class IV requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Flask, Boiling, Round Bottom, 250ml

    DWK Life Sciences (Kimble)

    KIMAX® round-bottomed boiling flask Reinforced tooled top Designed from ASTM Specification E1403, Type II, Class I, requirements Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • SYNTHWARE Microscale Round Bottom Flasks

    Kemtech America

    RounRound Bottom Flask, One Neck, Threaded, Synthware, Capacity: 5, 10, and 25mL, Joint: 14/10, Supplied with one open top compressioncap and one size 014 Viton O-ring and one PTFE-faced septad Bottom Flask, One Neck, Threaded, Synthware, Capacity: 5,

  • Pear Shaped Boiling Flasks

    DWK Life Sciences (Kimble)

    Single-neck flask with a Standard Taper outer joint at top Heavy wall Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.