Advantec MFS Lab Filtration Products
-
3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The…
-
Sterile Mixed Cellulose Esters (MCE) Membrane Filters - White Available pore sizes: 0.20µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm Color: White Surface: Gridded or Plain, and with or without Hydrophobic Edge (HE) Packaging: Individually wrapped or…
-
Polysulfone Vacuum Filter Holders
Advantec MFS47mm Filter Graduated Funnels: 300mL, 500mL, 800mL Autoclavable Advantec’s Polysulfone 47mm Filter Holders are an economical alternative to glass vacuum holders. The durable polysulfone plastic construction is chemically resistant and can withstand mishandling. The recessed…
-
Nylon Membrane Filters
Advantec MFSBroad chemical compatibility Negligible extractables Strong and heat resistant Nylon is a very strong, heat resistant membrane manufactured by impregnating a polyester web with the nylon polymer. Several uniques properties of Nylon make this polymer universally accepted in the…
-
• 3mm, 13mm, 25mm, 50mm • 0.10µm to 1.20µm • Minimal sample hold-up • High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient sterile disposable syringe filters…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose…
-
Reservoir elliminates the need for a pressure vessel Filter small batches of liquid Available in type 304ss or 316ss These quality stainless steel holders are designed for filtering small batches of liquid without having to use a separate pressure vessel. There are separate ports for…
-
Stainless Steel Syringe Filter Holders
Advantec MFSre-usable thereby eliminating waste using disposable units use a variety of membranes that may not be availabe in disposable units These 13mm and 25mm type 304 stainless steel syringe holders are economical and re-usable thereby reducing waste. Luer-lock fittings are compatible with…
-
Opticlear MCE Membrane Filters for Air Monitoring
Advantec MFSAdvantec developed the Opticlear Mixed Cellulose Esters (MCE) membrane filters for airborne asbestos monitoring. Opticlear MCE offers superior optical clarity in which to view particles compared to standard MCE. Clears completely, providing an optimal background for accurate particle…
-
Hydrophobic PTFE Membrane Filters
Advantec MFSOptional support backing for improved handling Filter corrosive solvents Sterile venting Protect pumps and machinery from aqueous aerosols PTFE membrane is a thin, highly porous film that behaves as an absolute retentive membrane. Their inherently hydrophobic nature make PTFE…
-
Polypropylene In-Line Filter Holder
Advantec MFSThermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
Sanitary Pressure Filter Holders, Stainless Steel
Advantec MFSThreadless Sanitary Connections 90mm, 142mm, 293mm Filter Diameters Available in Type 304ss and 316ss Large Sanitary Stainless Steel Pressure Filter Holders for batch type laboratory filtration using disc media. Sanitary connections can be completely disassembled for thorough…
-
Composite filters ideal for sampling airborne particulates
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
Glass Fiber Filters, High Wet Strength
Advantec MFSAdvantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Organic binder gives these filters higher wet strength and lower fiber release compared to binder-free grades. Thermostable to 120°C. Recommended for high pressure filtration, applications requiring wet…
-
Hydrophilic PTFE Membrane Filters
Advantec MFSFilter both aqueous and organic solvents Optically clear when wet Hydrophilic PTFE membranes are a thin, unsupported, highly porous film that offers maximum chemical and pH resistance to a broad range of aqueous and organic solvents. This membrane exhibits high flow rates with minimal…
-
Glass Fiber Filters, Air Monitoring
Advantec MFSAdvantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Highly resistant to chemical attack and biologically inert. Binder-free and thermostable to 500°C. These grades are recommended primarily used in environmental air monitoring applications. Grade…
-
Open-Face Aerosol Filter Holder
Advantec MFSThis 47mm aerosol filter holder is open-face for environmental monitoring or sampling of open atmosphere air and gases. Use for particulate or bacterial analysis. Thermoplastic polymer Polypropylene (PP) construction makes this holder durable and compatible with a wide range of chemical…
-
Large Stainless Steel Pressure Filter Holders
Advantec MFS90mm, 142mm, and 293mm filter diameters Available in type 304ss or 316ss Large Stainless Steel Pressure Filter Holders are offered in various sizes for batch type laboratory filtration or continuous filtration operations using disc media. Advantec holders have been designed to minimizes…
-
Glass Fiber Filters, Water Quality Testing
Advantec MFSAdvantec Glass Fiber Depth Filters feature high-loading capacity, fast flow rates, are highly resistant to chemical attack, and biologically inert. General purpose and clarifying filtration grades. Binder-free and thermostable to 500°C. Grade GA55 is a thin filter recommended for…
-
Qualitative Filter Paper
Advantec MFSAdvantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%.…
-
Polypropylene Syringe Filter Holder
Advantec MFSThermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications…
-
Stainless Steel Gas In-Line Filter Holders
Advantec MFSThreaded locking ring enables filter changes without disconnecting the gas lines. Dual support screens protect the membrane filter from reverse pressure surges and allow forward and reverse flow. Tighten by hand only - hand torque maximum is 15 lbs/in. Type 304ss body and support screen.…
-
Multi-Media Pressure Filter Holders, Stainless Steel
Advantec MFSUse a broad range of media thickness, including pads Multiple layers of media can be used without lateral wicking Unlike standard holders, the Multi-Media Pressure Sealing Filter Holder has a dual sealing system which allows the use of a broad range of media thickness, including pads.…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…
-
High Pressure In-Line Filter Holder, Stainless Steel
Advantec MFSHigh-quality and durable, this 47mm stainless steel in-line pressure holder can operate at high pressures up to 1420 psi (9.8 MPa). Standard FPM(Viton) O-rings are compatible with many aggressive liquids and gases. Type 304ss body and type 316ss sintered support screen. An optional…
-
Chemically Resistant PFA In-Line Filter Holders
Advantec MFSFilter acids, alkalis, or organic solvents Dual support screens allow flow in either direction Perfluoroalkoxy(PFA) polymer is very similar to PTFE resin. The PFA holder offers superior chemical compatibility and can be used with chemically aggressive liquids. Dual support screens allow…
-
Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose…