Filters

Compare Tool

Select up to 3 products

1 - 32 of 45
Sort
View
Show
  • Advantec Glass Fiber Depth Filters feature high-loading capacity, fast flow rates, are highly resistant to chemical attack, and biologically inert. General purpose and clarifying filtration grades. Binder-free and thermostable to 500°C. Grade GA55 is a thin filter recommended for…

  • Sterile Mixed Cellulose Esters (MCE) Membrane Filters - White Available pore sizes: 0.20µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm Color: White Surface: Gridded or Plain, and with or without Hydrophobic Edge (HE) Packaging: Individually wrapped or…

  • 3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The…

  • Advantec Qualitative Filter Papers are made of 100% cotton linter cellulose. Primarily used for clarifying and removing precipitates (ppt) and preparation for quantitative analysis. These papers can be used over a pH range from 0-12 and a maximum temperature of 120°C. Ash content of 0.1%.…

  • Advantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Highly resistant to chemical attack and biologically inert. Binder-free and thermostable to 500°C. These grades are recommended primarily used in environmental air monitoring applications. Grade…

  • PTFE Depth Filters

    Advantec MFS

    Pure PTFE (Polytetrafluoroethylene) fibers are sintered to create a unique depth-type filter. These PTFE filters offer superior handling and minimal fiber slough-off compared to glass and quartz filters. Naturally hydrophobic, the media will separate aqueous from non-aqueous phases of mixtures.…

  • Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose…

  • Filter acids, alkalis, or organic solvents Dual support screens allow flow in either direction Perfluoroalkoxy(PFA) polymer is very similar to PTFE resin. The PFA holder offers superior chemical compatibility and can be used with chemically aggressive liquids. Dual support screens allow…

  • Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…

  • Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…

  • 47mm filter diameter Available in type 304ss or 316ss Filter liquids or gases at point-of-use This 47mm in-line holder (model KS47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane during autoclaving. The…

  • Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…

  • Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…

  • Nylon Membrane Filters

    Advantec MFS

    Broad chemical compatibility Negligible extractables Strong and heat resistant Nylon is a very strong, heat resistant membrane manufactured by impregnating a polyester web with the nylon polymer. Several uniques properties of Nylon make this polymer universally accepted in the…

  • Low protein binding Low aqueous extractables Advantec Cellulose Acetate (CA) membrane filters are low protein binding and ideally suited for applications such as diagnostic cytology and receptor binding studies. Cellulose Acetate's hydrophilic nature and it's low absorptive…

  • Advantec Glass Fiber Filters are depth filters made of pure borosilicate glass microfibers. Organic binder gives these filters higher wet strength and lower fiber release compared to binder-free grades. Thermostable to 120°C. Recommended for high pressure filtration, applications requiring wet…

  • Filter both aqueous and organic solvents Optically clear when wet Hydrophilic PTFE membranes are a thin, unsupported, highly porous film that offers maximum chemical and pH resistance to a broad range of aqueous and organic solvents. This membrane exhibits high flow rates with minimal…

  • Composite filters ideal for sampling airborne particulates

  • Available pore sizes: 0.45µm and 0.80µm Color: Black or Green Surface: Gridded Packaging: Individually Wrapped and with or without Absorbent Pad. Pleated band for dispensers available. Advantec Mixed Cellulose Esters (MCE) colored membranes…

  • Optional support backing for improved handling Filter corrosive solvents Sterile venting Protect pumps and machinery from aqueous aerosols PTFE membrane is a thin, highly porous film that behaves as an absolute retentive membrane. Their inherently hydrophobic nature make PTFE…

  • Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Surfaces: Gridded or Plain Nonsterile bulk pack Mixed Cellulose Esters (MCE) membrane is a general purpose filter used in many applications…

  • This 47mm aerosol filter holder is open-face for environmental monitoring or sampling of open atmosphere air and gases. Use for particulate or bacterial analysis. Thermoplastic polymer Polypropylene (PP) construction makes this holder durable and compatible with a wide range of chemical…

  • High-quality and durable, this 47mm stainless steel in-line pressure holder can operate at high pressures up to 1420 psi (9.8 MPa). Standard FPM(Viton) O-rings are compatible with many aggressive liquids and gases. Type 304ss body and type 316ss sintered support screen. An optional…

  • Reservoir elliminates the need for a pressure vessel Filter small batches of liquid Available in type 304ss or 316ss These quality stainless steel holders are designed for filtering small batches of liquid without having to use a separate pressure vessel. There are separate ports for…

  • •  3mm, 13mm, 25mm, 50mm •  0.10µm to 1.20µm •  Minimal sample hold-up •  High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient sterile disposable syringe filters…

  • Threadless Sanitary Connections 90mm, 142mm, 293mm Filter Diameters Available in Type 304ss and 316ss Large Sanitary Stainless Steel Pressure Filter Holders for batch type laboratory filtration using disc media. Sanitary connections can be completely disassembled for thorough…

  • Advantec developed the Opticlear Mixed Cellulose Esters (MCE) membrane filters for airborne asbestos monitoring. Opticlear MCE offers superior optical clarity in which to view particles compared to standard MCE. Clears completely, providing an optimal background for accurate particle…

  • Support Pads

    Advantec MFS

    Please Note: ALL Advantec items have a maximum 48 hour cancellation window. Any cancellations AFTER the 48 hour window will incur a restocking fee equal to the cost of the product.

  • Thermoplastic polymer Polypropylene (PP) lends to this units durability and compatibility with a wide range of chemical solvents and temperatures. Exterior locking ring design allows unit to be assembled quickly and efficiently without tearing the membrane or removing from lines. Body and…

  • Advantec's Coated Cellulose Acetate composition is cellulose acetate cast onto a non-woven polyester support. It offers low protein binding and is non-fiber releasing. Cellulose acetate has a low static charge matrix with enhanced chemical compatibility to low molecular weight alcohols. The…

  • Use a broad range of media thickness, including pads Multiple layers of media can be used without lateral wicking Unlike standard holders, the Multi-Media Pressure Sealing Filter Holder has a dual sealing system which allows the use of a broad range of media thickness, including pads.…

  • Available pore sizes: 0.10µm, 0.20µm, 0.30µm, 0.45µm, 0.65µm, 0.80µm, 1.0µm, 3.0µm, 5.0µm Colors: White, Black, and Green Surfaces: Gridded or Plain, with or without Hydrophobic Edge (HE) Nonsterile bulk pack Mixed…

Compare Tool

Select up to 3 products